1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your Mekede Linux System Wireless Carplay and Android Auto Multimedia Display Screen. This unit is designed to enhance your driving experience by integrating modern smartphone connectivity and multimedia features while retaining your original car's functionalities.
The display features a high-resolution 8.8-inch touch screen, offering seamless navigation, entertainment, and communication capabilities. It supports both wireless and wired CarPlay and Android Auto, Bluetooth for hands-free calling and music streaming, USB multimedia playback, GPS navigation, phone mirrorlink, and AHD1080P camera input.
2. Compatibility
This multimedia display screen is compatible with specific BMW 3 and 5 Series models. Please verify your car's original system (CCC or CIC) before installation.
- For BMW 3 Series E90 E91 E92 E93:
- 2005-2008 models with Original CCC System
- 2009-2012 models with Original CIC System
- For BMW 5 Series E60 E61 E63 E64:
- 2005-2008 models with Original CCC System
- 2009-2010 models with Original CIC System
Important: Your car must have an AUX function for this unit to output sound. If your car does not have AUX, you will need an FM transmitter, which may result in lower sound quality.


3. Product Accessories List
The package typically includes the following components:
- 8.8-inch Multimedia Display Screen
- Power Cable
- AUX Cable
- USB Cable

4. Setup & Installation
The Mekede multimedia display is designed for a plug-and-play installation. However, specific steps are required for audio and display settings.
4.1. Solving No Sound Problem
If you experience no sound after installation, follow these steps:
- Connect the original car fiber optic cable to the interface of the conversion line, and then connect to the host.
- Connect the AUX cable and switch the mode to 'AUX' on your original car system.
If your car has an AUX input, you must use the provided AUX audio cable to connect. If your car does not have an AUX input, you will need to add an FM transmitter to produce audio, but the sound quality may not be as good as AUX. Please acknowledge this issue before installation.

4.2. Setting AUX Mode in Original System
To ensure proper audio output, set your original car system to AUX mode:
- Enter the original system menu.
- Navigate to 'CD/Multimedia'.
- Select 'External devices'.
- Choose 'AUX front'.
- Ensure 'AUX active' is selected and adjust volume as needed.

4.3. Setting Display Resolution
If the OEM menu displays symptoms like 'No Signal' or a flashing screen, check the LVDS connector and set the original menu resolution:
- Go to 'Settings' > 'Factory Settings'.
- Enter code: 8866.
- Select the original car's model and screen size.
- Select the correct resolution one by one until the display is clear.
Note: The display screen of the original car should correspond to the option, otherwise the display quality will be poor.

5. Operating Instructions
5.1. Basic Operation & Original Car Functions
The Mekede display allows for free switching between its Linux system and your original car system with a single button. It retains all original car functions:
- Original radio system
- Original CD function
- Steering wheel control
- Original audio system
- Original reversing image
- i-Drive control


5.2. Wireless/Wired CarPlay & Android Auto
The unit supports both wireless and wired connections for Apple CarPlay and Android Auto, allowing you to use your phone's apps on the screen for navigation, music, and calls.



5.3. Bluetooth Function
The built-in smart Bluetooth system supports mobile phone pairing for hands-free dialing, music streaming, and contact synchronization, ensuring driving safety.
- BT music playback
- Sync contacts
- Synchronous call record

5.4. USB Support
The unit supports multimedia playback from USB devices, allowing you to play music, movies, and view photos. It supports two USB connections.

5.5. GPS Navigation
Equipped with a built-in global positioning system, the display offers omni-directional map display, real-time traffic conditions, and accurate positioning. It supports popular navigation apps.
- Supported Navigation Apps: Navitel, iGO, Sygic, Yandex, Google Maps, Waze, Goode Map

5.6. Phone Mirrorlink
The unit supports wireless and wired mirror link for both iOS and Android phones. This feature allows you to display your phone's screen on the car's display, enabling map navigation, video playback, and music streaming directly from your phone's apps.

5.7. AHD1080P Camera Support
The display supports AHD1080P rear-view cameras, providing a clearer picture quality compared to ordinary cameras for enhanced safety during reversing.
Note: The rear-view camera is not included with the unit and must be purchased separately.

5.8. Car Information Display
The unit can display essential car information such as speed, fuel level, oil pressure, and safety warnings directly on the dashboard interface.

5.9. UI Customization
The system offers a collection of different user interface (UI) styles, allowing you to choose a display theme that suits your preference.

5.10. OTA Update
The system supports Over-The-Air (OTA) firmware upgrades. Connect the unit to WiFi to remotely upgrade the APP online, ensuring you have the latest features and optimizations.

6. Maintenance
To ensure the longevity and optimal performance of your Mekede multimedia display, follow these general maintenance guidelines:
- Cleaning: Use a soft, lint-free cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that could damage the surface.
- Temperature: Avoid exposing the unit to extreme temperatures, both hot and cold, as this can affect its electronic components.
- Moisture: Keep the unit dry and away from moisture. In case of accidental spills, power off the unit immediately and allow it to dry completely before use.
- Software Updates: Regularly check for and install OTA updates to ensure the system runs efficiently and securely.
- Cable Connections: Periodically check all cable connections to ensure they are secure and free from damage.
7. Troubleshooting
This section addresses common issues you might encounter with your multimedia display.
7.1. No Sound Output
If you are experiencing no sound from the unit:
- Fiber Optic Cable: Ensure the original car's fiber optic cable is correctly connected to the conversion line interface and then to the main unit.
- AUX Connection: Verify that the AUX cable is properly connected between the unit and your car's AUX input.
- AUX Mode: Switch your original car's multimedia system to AUX mode. Refer to Section 4.2 for detailed steps.
- FM Transmitter (if no AUX): If your car lacks an AUX input, an FM transmitter is required. Be aware that sound quality may be compromised.
7.2. OEM Menu Display Issues (No Signal, Flashing Screen)
If your original car's menu displays incorrectly or shows 'No Signal':
- LVDS Connector: Check the LVDS connector for secure and correct attachment.
- Resolution Settings: Access the 'Factory Settings' menu (Code: 8866) and adjust the display resolution to match your original car's system. Refer to Section 4.3 for detailed steps.
7.3. Wireless CarPlay/Android Auto Connection Issues
If you encounter problems connecting your phone wirelessly:
- Phone Settings: Ensure both Bluetooth and Wi-Fi are enabled on your phone.
- Device Search: Search for the device (e.g., "BTXXXX") in your phone's Bluetooth settings and connect. The PIN code is typically 0000.
- CarPlay Prompt: When a pop-up window appears on your phone, tap 'Use CarPlay'.
- Troubleshooting Steps:
- Delete any previously paired car Bluetooth records on your phone.
- Go to your car's Bluetooth settings and delete the paired phone record.
- Restart both your car and phone, then attempt to reconnect.
7.4. Wired CarPlay/Android Auto Connection Issues
If you have trouble with a wired connection:
- USB Cable: Use an original, high-quality data cable to connect your phone to the car's CarPlay USB port.
- CarPlay Prompt: Tap 'Use CarPlay' when prompted on your phone.
- Troubleshooting Steps: Follow the same troubleshooting steps as for wireless connection issues (delete paired records, restart devices, reconnect).
8. Specifications
| Feature | Specification |
|---|---|
| Operating System | Linux |
| Display Size | 8.8 inch |
| Touch Screen | Yes |
| Built-in Screen | Yes |
| Built-in DVD Player | No |
| Built-in CD Player | No (Retains original car's CD function) |
| TF/Micro SD Slot | 1 |
| Din Type | Double Din |
| Interface | Plug and Play |
| Voltage | 12 V |
| Item Weight | 2 kg |
| Material | Plastic and Hardware |
| Special Features | WiFi function, Steering Wheel Control Support, Can-Bus Support, Built-in GPS, Mobile Phone Connectivity, MP3 Player, CarPlay, Android Auto, Reversing Input |
| Digital Media Format | CD (via original car system), MP3, MP4, WMA, JPEG (via USB) |
| OSD Language | Chinese (Simplified), Chinese (Traditional), Irish, Estonian, Icelandic, Polish, Danish, German, French, Finnish, Dutch, Czech, Croatian, Romanian, Macedonian, Portuguese, Swedish, Serbian, Slovenian, Welsh, Spanish, Hungarian, English |
| Brand Name | Mekede / NaviFly |
| Certification | CE |
| Origin | Mainland China |
9. User Tips
To maximize your experience with the Mekede multimedia display, consider the following tips:
- Pre-Installation Check: Always confirm your car's original system (CCC/CIC) and the presence of an AUX function before purchasing and installing to avoid compatibility or sound issues.
- Cable Quality: For wired CarPlay/Android Auto and other connections, use high-quality, original data cables to ensure stable and reliable performance.
- Firmware Updates: Regularly check for and install OTA updates via WiFi. These updates often include performance improvements, bug fixes, and new features.
- Screen Cleaning: Use a soft, microfiber cloth specifically designed for electronics to clean the screen. Avoid harsh chemicals that can damage the anti-glare coating.
- Personal Hotspot: When using wireless features like AirPlay or OTA updates, ensure your phone's personal hotspot is stable and provides a strong signal.
- Sound Optimization: Experiment with the built-in equalizer (EQ) settings to find the audio profile that best suits your preferences and your car's acoustics.
10. Warranty and Support
The Mekede multimedia display is manufactured by Shenzhen Mekede Technology Co., Ltd. The product may be branded as either MEKEDE or NaviFly, both originating from the same manufacturer.

For specific warranty terms, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your seller directly. Keep your purchase records handy when seeking support.