Automatic Transfer Switch RP5D-400

Contents

RP5D-400 Automatic Transfer Switch User Manual

PC Type 4 Pole Automatic Transfer Switch for Dual Power Systems

1. Introduction

The RP5D series Automatic Transfer Switch (ATS) is a sophisticated device designed to seamlessly switch between a normal power source and a reserve power source. This unit integrates both switching mechanisms and a logic controller into a single, cohesive system, ensuring reliable power continuity.

It is suitable for distribution equipment in industrial and commercial settings, with a rated insulating voltage of up to 690V, rated frequency of 50Hz/60Hz, rated voltage of 380V, and a conventional heating current of up to 3200A. The ATS is ideal for critical applications such as hospitals, banks, high-rise buildings, coal mines, telecommunication centers, airports, and military installations where an uninterrupted power supply is essential.

The switch supports full-automatic operation, compulsory "0" (off) state, remote control, and urgent manual operation. It also features phase examination and protection (under/over voltage, frequency), and delay regulation, along with an electric mechanism interlock for enhanced safety.

The RP5D ATS is available in two main types: Basic and Fire Control. The Fire Control type offers additional features like remote control and enhanced phase protection.

2. Safety Information

  • Installation and maintenance should only be performed by qualified personnel.
  • Always disconnect all power sources before performing any work on the ATS.
  • Ensure proper grounding to prevent electrical shock.
  • Verify all connections are secure and correctly wired according to local electrical codes.
  • Do not operate the switch if any damage is visible.

3. Setup and Installation

The RP5D-400 ATS is designed for integration into distribution equipment. Proper installation is crucial for safe and reliable operation.

3.1 Unpacking and Inspection

  • Carefully remove the ATS from its packaging.
  • Inspect the unit for any signs of physical damage that may have occurred during transit.
  • Verify that all components listed in the packing list are present.

3.2 Mounting

Mount the ATS securely within a suitable electrical enclosure or distribution panel. Ensure adequate clearance for wiring, ventilation, and access for operation and maintenance.

ATS installed in a control panel

Figure 3.1: RP5D-400 ATS installed within a control panel, showing wiring connections.

3.3 Wiring Connections

Connect the normal power source, reserve power source (e.g., generator), and load according to the wiring diagram provided with your specific unit and local electrical codes. Pay close attention to phase (A, B, C) and neutral (N) connections.

Top-down view of the ATS with terminals for power connections

Figure 3.2: Top-down view of the ATS showing terminals for power connections (A, B, C, N).

Ensure all connections are tight and properly insulated. The ATS is designed for 3-phase systems, with 4 poles typically supplied unless a 3-pole version is specifically requested.

4. Operation

The RP5D-400 ATS offers various operational modes to manage power transfer.

4.1 Operational States

The switch has three primary states, indicated by the instruction piece:

  • I (Normal Power On): Indicates that the switch is connected to the normal power source.
  • II (Reserve Power On): Indicates that the switch is connected to the reserve power source.
  • 0 (Off): Both normal and reserve power sources are disconnected from the load.

4.2 Automatic Operation (Full-Automatic)

In full-automatic mode, the ATS continuously monitors the normal power source. If the normal power fails, the switch will automatically transfer the load to the reserve power source. Once normal power is restored, the switch will automatically transfer the load back to the normal power source.

4.3 Compulsory "0" (Off)

For urgent situations or device examination, a compulsory "0" self-lock button is available. Pressing this button will transfer the switch to the "0" position, disconnecting both normal and reserve power from the load.

4.4 Generator Integration

When integrated with a generator, the ATS can send a starting signal to the generator upon normal power failure. Once the generator is running and providing stable power, the switch transfers the load to the generator. When normal power returns, the switch reverts to normal power and sends a closing signal to shut down the generator.

4.5 Remote Control (Fire Control Type Only)

For Fire Control type ATS units, remote operation is possible. Pressing button "I" will connect the normal power, while pressing button "II" will connect the reserve power.

4.6 Manual Operation

The ATS can also be operated manually using the provided handle. This is typically used for testing or in emergency situations where automatic operation is not desired or possible.

Video 4.1: Demonstration of the RP5D-400 ATS manual operation.

RP5D-400 ATS with manual handle engaged

Figure 4.1: RP5D-400 ATS showing the manual operation handle.

5. Maintenance

Regular inspection and maintenance are crucial for the longevity and reliable operation of your RP5D-400 ATS.

  • Visual Inspection: Periodically check for any loose connections, damaged wiring, or signs of overheating (discoloration, burnt smell).
  • Cleaning: Keep the unit free from dust and debris. Use a dry, non-conductive cloth for cleaning.
  • Terminal Tightness: Ensure all power terminals remain tight to prevent arcing and overheating.
  • Functional Test: Regularly test the automatic transfer function by simulating a normal power failure (if safe to do so and permitted by your system configuration).

For detailed maintenance procedures or if you encounter any issues, consult a qualified electrician or contact technical support.

6. Troubleshooting

This section provides basic troubleshooting steps for common issues. For complex problems, always consult a qualified electrician.

6.1 Common Issues and Solutions

  • ATS does not transfer automatically:
    • Check if both normal and reserve power sources are available and stable.
    • Verify control voltage (AC220V) is present.
    • Ensure the ATS is set to automatic mode (if applicable).
    • Inspect for any tripped circuit breakers upstream.
  • ATS is stuck in "0" position:
    • Check if the compulsory "0" button is engaged. Disengage if necessary.
    • Verify control power supply.
  • Generator does not start/stop:
    • Check the generator's own control system and fuel supply.
    • Verify the starting/stopping signals from the ATS are correctly wired to the generator.
  • Phase protection activated (Fire Control Type):
    • Check the incoming phases of both normal and reserve power for any breaks or voltage anomalies.

If the problem persists after performing these checks, contact technical support.

7. Specifications

FeatureSpecification
Model NumberRP5D-400
Product NameAutomatic Transfer Switch
TypePC
OriginMainland China (Zhejiang)
Number of Pole4 (3 poles optional)
PhaseThree Phase
Rated Current400A
Max. Current3200A
Rated Insulation Voltage (Ui)800V
Rated Working Voltage (Ue)AC440V
Max. Voltage400V
Standard Control Voltage220V
Non-Standard Control Voltage110V or 120V customized
Frequency50/60Hz
Rated Impaction Withstand Voltage (Uimp)8KV
Rated Making Capacity25.2kA
Rated Limiting Short-Circuit Current20kA
Rated Short Time Withstand Current12.6kA
Transfer Timeless than 4 seconds (2 seconds listed in table)
Working State3 position: I-O-II
FunctionGive auto Start generator signal
Energy Consumption (Motor Start)355W
Energy Consumption (Motor Normal)74W

Note: The transfer time is specified as "less than 4 seconds" in the general description and "2's" in the detailed table. Please refer to the specific product labeling for the most accurate value.

8. Warranty and Support

For warranty information, please refer to your purchase documentation or contact your vendor directly. Technical support is available for installation guidance, troubleshooting, and general inquiries.

For product specs, bulk pricing, or custom sourcing, you may contact the seller via WhatsApp: +86 181 6360 1436.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.