1. Safety Information
1.1. Security Warning
- It is strongly recommended to use the adapter provided by our company. Connecting an improper adapter may cause fire, explosion, or damage to the printer.
- When the printer is working or just after printing, please do not open the top cover of the machine, and do not touch the print head or printer body with your hands. Overheating may cause burns.
1.2. Precautions
- Do not use or store the printer in places with high temperature, high humidity, or serious pollution.
- Connect the printer's power adapter to a properly grounded socket. Avoid using the same socket as a large motor or other device that can cause power voltage fluctuations.
- Avoid water or conductive substances (such as metal) entering the inside of the printer. Once this happens, turn off the power immediately.
- The printer must not print without paper, otherwise the printing roller and thermal print head will be seriously damaged.
- Users are not allowed to disassemble the printer for maintenance or modification without authorization.
- In order to ensure printing quality and product life, it is recommended to use equivalent quality thermal paper.
- Please keep this user manual properly for reference.
2. Setup Guide
2.1. Product Overview
The HZTZ Thermal Label Printer is designed for high-speed, clear quality printing without ink. It supports both USB and Bluetooth connectivity, making it versatile for various business needs.

Image: HZTZ Thermal Label Printer showcasing USB and Bluetooth connectivity with various label types.
2.2. Printer Components and Ports
Familiarize yourself with the printer's internal components and external ports:

Image: Diagram showing internal components: Print Head, Paper Guide, Sensor, Rubber Roller, Cover Release Button.

Image: Rear view of the printer with labeled ports: Feed Button, Type-C Port, DC Power Input, On/Off Switch.
2.3. Paper Roll Installation
The printer supports both roll paper and stacked paper loading methods.
- Open the printer cover.
- Place the thermal paper roll into the paper loading position as shown in the figure. Ensure the roll paper side is up and the maximum diameter is 100mm.
- Pull out a short length of paper outside the box, then close the top cover.

Image: Illustration of roll paper and stacked paper loading methods, indicating maximum roll diameter.
2.4. Driver Installation
Printer drivers and tools can be downloaded from: www.cnfujun.com/d/66
2.4.1. For Mac OS (USB Connection)
Please confirm the printer is turned on and connected to your computer by USB cable before installing the driver. Bluetooth connection is not supported on Mac systems for driver installation.
- Our package contains a USB flash drive with an installation package. Locate and double-click the file
Labelprinter2.3.3.dmg. - Double-click
Label Printer_sign2.3.3.pkg. - Click 'Continue' in the installer.
- Enter your computer's local password and click 'Install Software'.
- Click 'Install'.
- Once installation is successful, click 'Close'.
2.4.2. For Windows OS (USB Connection)
- Find the
LabelDriver.exefile and double-click to open it. - If prompted by User Account Control, click 'Yes'.
- Select 'Install printer driver' and click 'Next'.
- Ensure the printer is powered on and connected via USB. Click 'Next'.
- Select the USB port (e.g., 'USB001') and click 'Next'.
- The default model 'LABEL-9X00' will be selected. Click 'Next'.
- The default printer name will be generated. Click 'Next'.
- Confirm to install the driver by clicking 'Next'.
- If a Windows Security prompt appears, click 'Install'. The printer will automatically print a test page. Click 'Close' to finish.
2.4.3. For Windows OS (Bluetooth Port Connection)
- Select the 'Bluetooth' port and click 'Next'. Ensure your computer's Bluetooth is turned on.
- The computer will search for nearby Bluetooth devices. Select the printer with the default Bluetooth name 'Bluetooth Printer' (check the printer's self-test page for its name and address). The software default Bluetooth pairing code is '1234'. Click 'Next'.
- The default model 'LABEL' will be selected. Click 'Next'.
- The default printer name will be generated. Click 'Next'.
- Confirm to install the driver by clicking 'Next'.
- The printer will automatically print a test page. Click 'Close' to finish.
2.4.4. For Windows OS (Network or WiFi Port Connection)
- Select the 'Network or WIFI' port and click 'Next'.
- Click 'Next'.
- The default selected Port (from the self-test page) will be shown. Click 'Next'.
- The default printer name will be generated. Click 'Next'.
- Confirm to install the driver by clicking 'Next'.
- If a Windows Security prompt appears, click 'Install'. The printer will automatically print a test page. Click 'Close' to finish.
2.5. Adding Printer to Mac
- Click the Apple icon in the upper left corner, then click 'System Settings...'.
- Click 'Printers & Scanners'.
- Click 'Add Printer, Scanner, or Fax...' to add the printer driver.
- For Mac (M1 system), click '+' to add a new printer.
- Click 'LABEL-9X00' in the box to automatically identify and add it, then click 'Add' to complete the addition.
3. Operating Instructions
3.1. Connectivity
The HZTZ Thermal Label Printer offers flexible connectivity options:
- USB Connection: Connect directly to your computer for reliable printing.
- Bluetooth Connection: Print wirelessly from your iOS or Android devices, as well as compatible computers.

Image: Printer demonstrating USB and Bluetooth connectivity, compatible with iOS, Android, Windows, Mac OS, and iPad.
3.2. High-Speed and Quality Printing
Experience efficient and clear label printing with speeds up to 160mm/s.

Image: Visual representation of the printer's high-speed (160mm/s) and clear print quality.
3.3. Printing from Mac
- Open the PDF file you wish to print.
- Go to 'File' > 'Print...'.
- Click 'Other' to select the correct printing size. For standard shipping labels, select '100mmX150mm' (4.00x6.00 inches).
- After selecting the size, click 'Default Settings' > 'Save Current Settings as Preset...'.
- Enter a name for your preset (e.g., 'Label Print') and click 'OK'.
- Finally, click 'Print'.
3.4. Printing Demonstration Video
Video: A demonstration of the HZTZ Thermal Label Printer in action, printing various types of labels.
4. Maintenance
4.1. How to Clean the Print Head
The print head should be cleaned when:
- The printing is not clear.
- A vertical column of the printed page is not clear.
- Paper feeding noise is loud.
- There is too much carbon deposit on the print head.
Cleaning Steps:
- Turn off the power of the printer, open the upper cover, and remove the paper if there is any.
- If you have just finished printing, wait for the print head to cool down completely.
- Use a soft cotton cloth dipped in absolute ethanol (should be wrung out) to wipe away dust and stains on the surface of the thermal sensor of the print head.
- Wait for the absolute ethanol to evaporate completely, then close the upper cover and try printing again.
Notice:
- Make sure the power is turned off during routine maintenance of the printer.
- Do not touch the surface of the print head with your hands or metal objects, and do not use tweezers and other tools to scratch the surface of the print head, printing roller and sensor. Organic solvents such as gasoline and acetone must not be used.
5. Troubleshooting
5.1. Label Calibration Method
If the paper skips or prints continuously without stopping, the printer needs calibration. Follow these steps:
- Put the paper into the printer and power on the printer.
- When the power light is on, press and hold the 'FEED' button for 5-6 seconds until the LED light flashes and the buzzer beeps. Then release the 'FEED' button.
- Restart the printer and perform a test print.
Note: Calibration values may vary due to different paper specifications. The operation can be adjusted based on specific cases.
5.2. Exception Handling After Calibration
Case 1: With paper, but the printer reports an error.
- Remove the paper and power off the printer.
- Power on the printer. Once the red light flashes, immediately long-press the 'FEED' button.
- Release the button when the red light flashes again and the buzzer beeps.
- Wait 2 seconds, then restart the printer and test it again.
Case 2: Without paper, but the printer does not report an error.
- Remove any paper from the printer.
- Power on the printer and press and hold the 'FEED' button for 5-6 seconds.
- Release the button when the red light flashes and the buzzer beeps twice.
- Restart the printer and perform a test print.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | HZTZ |
| Model | 9260BT |
| Type | Thermal Printer |
| Use | Thermal Label Printer |
| Print Speed | 20ppm (up to 160mm/s) |
| Resolution | 203DPI |
| Interface Type | Bluetooth, USB (Type-C) |
| Signal Connection Type | Bluetooth |
| Supports Network Printing | Wired/Wireless |
| Paper Feed Mode | Friction Feed |
| Max Paper Size | 110mm (supports 4x6 inch labels) |
| Double-sided Printing | No |
| Battery Included | No |
| High-concerned chemical | None |
| Origin | Mainland China |
| Product Dimensions (L x W x H) | 180mm x 78mm x 75mm (7.4 x 3.07 x 2.95 inches) |
| Package Weight | 0.858 kg |
7. User Tips
- For optimal print quality, always use high-quality thermal labels.
- Ensure your labels are properly aligned in the printer to prevent jams and misprints.
- Regularly clean the print head as described in the maintenance section to maintain clear and consistent print output.
- When printing from a mobile device via Bluetooth, ensure the printer is within range and paired correctly for a stable connection.
8. Frequently Asked Questions (FAQ)
Q: What type of labels does the printer use?
A: The HZTZ Thermal Label Printer uses thermal labels and supports a maximum paper size of 110mm, including common 4x6 inch shipping labels.
9. Warranty and Support
9.1. Item Guides & Documents
A user manual in PDF format is available for detailed instructions. You can access it via the seller's provided link or the product page.
9.2. Seller Information
This item is sold by HZTZ Printer Store Store.
9.3. Regulatory Information (FCC WARNING)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.