1. Introduction
Thank you for choosing the SMAEL 8007 Military Sport Watch. This watch combines robust design with multi-functional features, including dual time display, LED backlight, stopwatch, alarm, and calendar functions, all within a 50-meter water-resistant casing. Please read this manual carefully to understand the proper operation and care of your watch.

Figure 1: SMAEL 8007 Military Sport Watch (Gary)
2. Watch Components
Familiarize yourself with the buttons and display areas of your watch:
- LIGHT Button: Activates the LED backlight.
- MODE Button: Cycles through different modes (Time, Alarm, Stopwatch, Dual Time).
- START Button: Used to start/stop stopwatch, adjust settings, or change values.
- RESET Button: Used to reset stopwatch, adjust settings, or change values.
- Analog Display: Shows current time with hour and minute hands.
- Digital Display: Shows time, date, day of the week, and other mode-specific information.
3. Setup and Initial Time Setting
3.1 Setting Digital Time and Date
- In normal timekeeping mode, press the MODE button three times until the seconds start flashing. This indicates you are in setting mode.
- Press the RESET button to cycle through the settings: Seconds → Hour → Minute → Month → Date → Day of the Week.
- Use the START button to adjust the flashing value.
- Once all settings are correct, press the MODE button to exit the setting mode.
3.2 Setting Analog Time
The analog hands are typically set independently. There is usually a small crown on the side of the watch (though not explicitly visible in all images, common for analog-digital watches). Pull out the crown and turn it to adjust the analog hands. Push the crown back in when finished.
4. Operating Instructions
4.1 LED Backlight
Press the LIGHT button to illuminate the digital display for a few seconds. This feature is useful in low-light conditions.

Figure 2: Night Light Feature
4.2 Stopwatch Function
- From normal timekeeping mode, press the MODE button once to enter Stopwatch mode. The display will show '00:00:00'.
- Press the START button to begin timing.
- Press the START button again to pause timing.
- Press the RESET button while paused to reset the stopwatch to '00:00:00'.
- Press the MODE button to return to normal timekeeping mode.
4.3 Alarm Function
- From normal timekeeping mode, press the MODE button twice to enter Alarm mode.
- Press the RESET button to select the hour or minute to set.
- Use the START button to adjust the flashing value.
- Press the MODE button to exit Alarm setting mode.
- To turn the alarm ON/OFF, in Alarm mode, press the START button. An alarm icon will appear/disappear.
4.4 Dual Time Display
Your watch supports a dual time display feature, allowing you to track time in another time zone. Use the MODE button to navigate to the Dual Time mode and follow similar adjustment steps as setting the main time.
4.5 12/24 Hour Format
When setting the time, you can toggle between 12-hour (AM/PM) and 24-hour formats by pressing the START button when the hour is flashing.
4.6 Water Resistance (50M / 5 BAR)
The SMAEL 8007 watch is rated for 50 meters (5 BAR) of water resistance. This means it is suitable for:
- Cold showers
- Rain exposure
- Swimming
- Washing hands
IMPORTANT: Do NOT press any buttons while the watch is submerged in water. Avoid exposure to hot water or water vapor (e.g., hot showers, saunas) as this can compromise the water seals.

Figure 3: Water Resistance Capabilities
Video 1: Demonstration of SMAEL 8007 water resistance and durability.
5. Maintenance and Care
- Cleaning: Wipe the watch regularly with a soft, dry cloth to remove dirt and moisture. For stubborn dirt, a slightly damp cloth can be used, followed by drying.
- Avoid Chemicals: Do not expose the watch to solvents, detergents, perfumes, or other chemical agents, as they can damage the case, band, or seals.
- Temperature Extremes: Avoid exposing the watch to extreme temperatures (very hot or very cold) or sudden temperature changes, which can affect accuracy and water resistance.
- Magnetic Fields: Keep the watch away from strong magnetic fields, as they can interfere with the movement and accuracy.
- Battery Replacement: When the display becomes dim or the watch stops functioning, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance.
6. Troubleshooting
- Display is blank or dim: The battery may be low or depleted. Replace the battery.
- Time is incorrect: Re-set the digital and analog time as per Section 3. If the issue persists, the battery might be weak.
- Buttons are unresponsive: Try pressing all buttons firmly. If still unresponsive, the battery may be low, or there might be an internal issue.
- Fog or moisture inside the watch: This indicates a breach in the water resistance. Avoid further water exposure and seek professional service immediately.
7. Specifications

Figure 4: Basic Parameters
| Feature | Specification |
|---|---|
| Brand | SMAEL |
| Model Number | 8007 |
| Item Type | Digital Wristwatches |
| Style | SPORT |
| Movement | Digital (Quartz + Digital) |
| Display Type | Analog-Digital |
| Case Material | Acrylic |
| Dial Window Material Type | Acrylic |
| Dial Diameter | 54mm |
| Case Thickness | 22mm |
| Case Shape | Round |
| Band Material Type | PU |
| Band Width | 20mm |
| Wearing Range | 140mm - 230mm |
| Clasp Type | Buckle |
| Water Resistance Depth | 5Bar (50M) |
| Features | Back Light, LED Display, Alarm, Stopwatch, Dual Time, Calendar, Week |
| Boxes & Cases Material | Paper |
| Origin | Mainland China |
| Certification | CE |
| Battery Included | Yes |
| Rechargeable Battery Included | No |
| Wireless | No |
| Voltage | <36V |
| Bottom Cover Material | Stainless Steel |
| Gram Weight | 78g |
8. User Tips
- Always ensure the watch is clean and dry before operating buttons, especially after water exposure.
- Avoid pressing any buttons while the watch is submerged in water to maintain its water resistance integrity.
- Regularly check the time against a reliable source to ensure accuracy, especially after significant temperature changes.
- If you notice any condensation inside the watch, expose it to dry air and seek professional inspection to prevent damage.
9. Warranty and Support
For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. Keep your proof of purchase for any warranty claims.
For technical support or service inquiries, please contact the seller or authorized service center.