Introduction
This manual provides detailed instructions for the UGREEN 40Gbps Dual-Bay M.2 NVMe SSD Cloner with RAID functionality. This device is designed for high-speed data transmission, convenient offline cloning, and flexible data management through various RAID modes. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's capabilities.
Figure 1: UGREEN Dual-Bay M.2 NVMe SSD Cloner
Product Overview
The UGREEN SSD Cloner features a robust design for efficient and reliable performance. Key components include:
- Dual M.2 Slots: Labeled 'Source' (A) and 'Target' (B) for SSD installation.
- Clone Button: For initiating the one-click offline cloning process.
- LED Indicator: Provides visual feedback on device status and activity.
- USB-C Ports: For connecting to a host device and power.
- Cooling Fan: Integrated for effective heat dissipation.
- Aluminum Alloy Casing: Durable and aids in heat management.
Setup
- Install M.2 SSDs:
- Ensure the device is powered off and disconnected from any computer.
- Open the enclosure.
- Carefully insert your M.2 NVMe SSDs into the designated 'Source' (A) and 'Target' (B) slots. This device supports M Key NVMe/PCIe and M&B Key NVMe/PCIe SSDs in sizes 2230, 2242, 2260, and 2280. It does not support B Key NGFF/SATA SSDs.
- Secure the SSDs in place using the tool-free mechanism.
- Close the enclosure.
Figure 2: Compatible M.2 SSD sizes and installation
- Connect to Power: Connect the power adapter to the device and a power outlet.
- Connect to Host Device (for data transmission/RAID configuration): Use the provided USB-C cable to connect the cloner to your computer (MacBook, Windows PC, Linux system, etc.).
Operating Instructions
1. Data Transmission
When connected to a compatible host device via USB4, the cloner supports ultra-high-speed data transmission up to 40Gbps. This is ideal for transferring large files, professional video editing, and large-scale video games.
Figure 3: 40Gbps Ultra-High-Speed Transmission
2. One-Click Offline Cloning
The device features a convenient one-click offline cloning function, allowing you to duplicate data between two M.2 SSDs without needing a computer.
- Ensure the source SSD (with data) is in slot 'A' and the target SSD (where data will be copied) is in slot 'B'.
- Important: The target disk's capacity must be equal to or greater than the source disk's capacity. The target disk will be formatted during the cloning process, erasing all existing data.
- Connect the power adapter. Do NOT connect the device to a computer.
- Press and hold the 'Clone' button for a few seconds until the LED indicator changes, then release.
- Press the 'Clone' button again briefly to start the cloning process.
- Monitor the LED indicator for progress. Once complete, the indicator will signal success.
Figure 4: One-Click Offline Cloning Process
3. RAID Modes
The cloner supports various RAID modes to optimize storage for different needs:
- RAID 0 (Rapide mode): Offers ultra-fast transmission speeds by striping data across both SSDs. Ideal for applications requiring maximum performance, such as professional video editing and large-scale video games.
- RAID 1 (Safety mode): Provides data redundancy by mirroring data across both SSDs. Ensures a secure environment with multiple backups, protecting against single drive failure.
- PM mode (Normal mode): Presents each SSD as an independent drive. Easy to use and allows for flexible expansion by adding or removing SSDs.
- Union Mode (Capacity Expansion): Combines the capacities of both SSDs into a single, larger volume. Allows you to freely store large amounts of data without managing separate drives.
Refer to the device's specific RAID configuration instructions (usually involving a switch or button combination) to set your desired mode. Ensure you understand the implications of each RAID mode before configuration, as some modes involve data loss during setup.
Figure 5: Multiple RAID Use Cases
Maintenance
The UGREEN SSD Cloner is designed with advanced cooling features to ensure stable and reliable performance:
- Extreme Heat Dissipation: The aluminum alloy top shell, combined with a 40mm direct-flow cooling fan and thermal pads, efficiently dissipates heat generated by the SSDs.
- Cleaning: Periodically clean the exterior of the device with a soft, dry cloth. Ensure the fan vents are free from dust and obstructions to maintain optimal airflow.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
Figure 6: Extreme Heat Dissipation Design
Troubleshooting
Refer to the LED indicator for device status:
- White Light Flashing: Indicates normal device read/write activity or that the device is currently reading data.
- Red Light Flashing: Indicates a read exception or an error during operation.
Figure 7: LED Indicator Status
Common Issues:
- Cloning Failure: Ensure the target SSD is equal to or larger in capacity than the source SSD. Verify both SSDs are properly seated in their slots.
- Device Not Recognized: Check all cable connections. Try a different USB-C port or cable. Ensure your operating system drivers are up to date.
- Slow Transmission Speed: Ensure you are using a USB4 compatible port and cable on your host device to achieve 40Gbps speeds. Older USB standards will result in lower speeds.
- Overheating: Ensure the cooling fan vents are clear of obstructions. If the device feels excessively hot, disconnect it and allow it to cool before resuming use.
Specifications
| Feature | Specification |
|---|---|
| Model Number | CM847/65733 |
| Interface Type | M.2 (M Key) |
| Transmission Speed | Up to 40Gbps (USB4) |
| Supported SSDs | M.2 NVMe SSDs (M Key, M&B Key) |
| Supported SSD Sizes | 2230, 2242, 2260, 2280 |
| Max Single Drive Capacity | 8TB |
| Max Dual Drive Capacity | 16TB |
| RAID Modes | RAID 0, RAID 1, PM, Union Mode |
| Cooling System | Aluminum alloy casing, 40mm direct-flow cooling fan, thermal pad |
| Compatible OS | Windows, Mac OS, Linux |
| Origin | Mainland China |
Figure 8: Wide Compatibility with Operating Systems
User Tips
- For optimal performance, ensure your host device supports USB4 to fully utilize the 40Gbps transmission speed.
- Always back up critical data before performing any cloning or RAID configuration changes, especially when formatting is involved.
- When using the offline cloning feature, double-check that the source and target SSDs are in the correct slots to prevent accidental data loss.
- Keep the device's cooling vents clear to maintain efficient heat dissipation and prolong the lifespan of your SSDs and the cloner.
Warranty & Support
For warranty information, technical support, or service inquiries, please refer to the official UGREEN website or contact your retailer. Keep your purchase receipt as proof of purchase for warranty claims.