OBD2 Scanner V320

Contents

V320 OBD2 Scanner User Manual

Model: V320

1. Introduction

The V320 OBD2 Scanner is a versatile diagnostic tool designed to monitor vehicle health, perform oxygen tests, display voltage and data streams, and check I/M readiness. It is suitable for most fuel vehicles manufactured from 1996 onwards (diesel vehicles require OBD2 protocol support). This manual provides detailed instructions for safe and effective use of your device.

Product Overview

The V320 OBD2 Scanner is a compact, handheld device featuring a clear LCD display and intuitive button controls for easy navigation through diagnostic menus. It connects directly to your vehicle's OBD-II port.

V320 OBD2 Scanner main unit
Figure 1: V320 OBD2 Scanner Main Unit (Red Variant)

Key Features

  • Read and Erase Diagnostic Trouble Codes (DTCs)
  • View Freeze Frame Data
  • Perform I/M Readiness Test (Inspection/Maintenance)
  • Display Live Data Stream
  • Retrieve Vehicle Information (VIN, Calibration ID, etc.)
  • DTC Lookup Function for quick fault identification
  • Oxygen Sensor Test
  • Voltage Monitoring
  • Multilingual Support (English, German, French, Spanish, Italian, etc.)
  • Plug and Play design, no battery required (powered by vehicle)

2. Safety & Warnings

Read all instructions before use to ensure safety and prevent damage to yourself or your vehicle.

General Safety Measures

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Ensure the vehicle is guarded during testing by placing a block plate in front of the drive wheel.
  • Exercise caution when operating near the ignition wire and spark plug of the ignition coil distributor cover. These components generate dangerous voltage when the engine is running.
  • Place the gearbox in PARK (automatic gearbox) or NEUTRAL (manual gearbox) and ensure the parking brake is engaged.
  • Keep fire extinguishers suitable for petrol/chemical fires nearby.
  • Do not connect or disconnect any test equipment when the ignition switch is open or the engine is running.
  • Keep the decoder dry and clean. Do not allow oil, water, or lubricants to adhere to it. Wipe the decoder with a clean, gentle cleaner if necessary.
  • Operate the vehicle in a well-ventilated area, as waste gas is harmful to human health.
  • Wear eye protective devices in accordance with ANSI standards.
  • Keep clothes, hair, hands, tools, and test equipment away from all motor heating components.

3. Device Components

The V320 OBD2 Scanner features a user-friendly interface with dedicated buttons for various functions.

V320 OBD2 Scanner with labeled buttons
Figure 2: V320 OBD2 Scanner Interface and Functions
  1. Diagnostic Joint: Connects the decoder to the vehicle data link connector (DLC).
  2. LCD Display: Shows the detection results and menu options.
  3. Vehicle No.: Displays the vehicle identification code.
  4. Up/Roll Button: Moves up through menus or previous screens.
  5. Return Button: Cancels selection/operation, returns to the previous menu, or long-presses for 3 seconds to set units.
  6. DTC Button: Accesses diagnostic code functions.
  7. Confirm Button (OK): Confirms selection/operation in menus, moves to the next screen for multi-screen DTCs.
  8. Down/Roll Button: Moves down through menus or next screens for multi-screen DTCs.

4. Setup Instructions

4.1. Preparation

  • Remove all protective films from the device.

4.2. Charging (Initial Power-up)

The V320 OBD2 Scanner is typically powered directly from the vehicle's OBD-II port. However, for initial setup or firmware updates, it may require external power.

  • Connect the provided USB cable to a certified 5V power adapter.

4.3. Power On

  • Press and hold the power button for 3 seconds.

4.4. Connecting to Vehicle

The V320 OBD2 Scanner features a plug-and-play design. Locate your vehicle's 16-pin OBD-II diagnostic port, usually found under the dashboard on the driver's side.

Plug and Play design showing connection to OBD port
Figure 3: Connecting the V320 OBD2 Scanner to the Vehicle's OBD Interface

Important: Plug the product into the car OBD interface. Start the car engine to use the product. Different vehicles may have multiple 16-pin interfaces. If the car does not start or the device does not connect, ensure the engine is running and try connecting to different OBD dedicated interfaces if available.

Diagram showing common OBD port locations in a car
Figure 4: Common OBD-II Port Locations (A, B, C, D)

Video 1: V320 OBD2 Scanner Product Demonstration and Basic Operation

5. Operating Instructions

Once connected and powered on, the device will display the main diagnostic menu. Use the Up/Down buttons to navigate and the OK button to select.

5.1. Diagnostic Menu Functions

Short press the button to cycle through functions.

Full OBD Functions menu on V320 scanner
Figure 5: Full OBD Functions Menu

Read Codes

This function allows you to retrieve Diagnostic Trouble Codes (DTCs) stored in the vehicle's onboard computer. These codes indicate specific issues detected by the vehicle's systems.

Erase Codes

After addressing a vehicle issue, you can use this function to clear the stored DTCs and turn off the Malfunction Indicator Light (MIL).

View Freeze Frame

Freeze Frame data records the relevant status information of the vehicle when a malfunction occurs. This snapshot helps in diagnosing intermittent problems.

I/M Readiness (Inspection/Maintenance)

This test monitors whether the components and systems related to vehicle emissions are working properly. It helps determine if your vehicle is ready for an annual smog test.

I/M Readiness Test screen showing monitor status
Figure 6: I/M Readiness Test Screen

Vehicle Information

Accesses information such as Vehicle Identification Number (VIN), Calibration ID, and Calibration Verification Number (CVN).

Data Stream

Used to detect the running status and faults of vehicles. It includes various real-time information such as engine speed, coolant temperature, fuel system status, load percentage, and more.

Live Data Display showing various engine parameters
Figure 7: Live Data Stream Display

Real-Time Curve

Displays real-time data in a graphical format, allowing for visual monitoring of parameters like car speed, calculated load value, engine coolant temperature, and engine RPM.

DTC Lookup

This function allows you to quickly locate the fault position and type by entering a DTC, helping maintenance personnel to quickly find and deal with the problem.

Built-in DTC definitions for fault codes
Figure 8: Built-in DTC Definitions Example (P0115)

6. Maintenance & Storage

6.1. Cleaning

  • Turn off the device before cleaning.
  • Use a soft, lint-free cloth to wipe the device.

6.2. Storage

  • Store the device in a dry place at room temperature (15°C - 35°C).
  • For long-term storage, if not used for a long time, ensure the device is charged to approximately 50% every 3 months to maintain battery health (if applicable, though this model is stated as 'No Battery Required', this is a general good practice for electronic devices).

7. Troubleshooting

7.1. Device Not Powering On / Not Linking to Vehicle

  • Ensure the device is securely plugged into the vehicle's 16-pin OBD-II port.
  • Verify that the vehicle's engine is running. The scanner draws power from the vehicle.
  • If your vehicle has multiple 16-pin interfaces, try connecting to a different one.

7.2. "No Codes Stored" or "No Freeze Frame Data"

  • This message indicates that the vehicle's onboard computer has not detected any current or pending diagnostic trouble codes, or no freeze frame data was recorded at the time of a fault. This is a normal indication if there are no issues.

7.3. Buttons Not Responding Properly

  • Ensure the device is clean and free from debris or liquids that might interfere with button operation.
  • Try pressing the buttons firmly and deliberately.
  • If the issue persists, try restarting the device by unplugging and re-plugging it from the OBD-II port.

8. Technical Specifications

FeatureDetails
Product NameCar Diagnostic Tool
ModelV320
Item TypeCode Readers & Scan Tools
Input VoltageVehicle powered (e.g., 9-16V from OBD-II port)
Battery IncludedNo
Wireless FunctionNo
Wireless SupportNo
OriginMainland China
CertificationsCE, RoHS, UKCA
Product DimensionsApprox. 11.72cm (4.61inch) x 6.86cm (2.70inch)
Package Dimensions18cm (L) x 14cm (W) x 3cm (H)
Package Weight0.183 kg
Product size diagram of V320 OBD2 Scanner
Figure 9: V320 OBD2 Scanner Product Dimensions

9. User Tips

  • Language Settings: The V320 scanner supports multiple languages including English, German, French, Spanish, and Italian. Navigate to the 'System Setup' menu to change the language if needed.
  • Check Compatibility: Ensure your vehicle is a fuel vehicle made after 1996. Diesel vehicles require specific OBD2 protocol support.
  • Engine Light: If your car has an engine failure light, this tool can help diagnose and clear the codes.
Multilingual support settings on V320 scanner
Figure 10: Multilingual Support Settings

10. Frequently Asked Questions (FAQ)

Q: Is the menu available in Polish?
A: The device supports multiple languages including English, German, French, Spanish, and Italian. Please check the 'System Setup' menu for available language options.
Q: Is the device available in French?
A: Yes, the device supports French. You can select French from the language settings in the 'System Setup' menu.
Q: Can I get a list of supported vehicles?
A: The V320 OBD2 Scanner is compatible with most fuel vehicles made after 1996. For specific vehicle compatibility, please refer to the manufacturer's website or contact customer support.

11. Disposal & Recycling

This symbol indicates that this product should not be treated as household waste. According to the EU Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point. Recycling helps prevent potential negative consequences for the environment and human health.

12. Additional Resources

A comprehensive user manual in PDF format is available for download. This document contains additional details and diagrams not covered in this condensed manual.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.