1. Overview
The LAUNCH CRP129i V3.0 is an advanced OBD2 scanner and diagnostic tool designed for comprehensive vehicle analysis. It features a new processor and higher hardware specifications compared to previous versions, including support for CAN FD protocols. This tool offers in-depth diagnostics for four core systems (Engine, Transmission, ABS, Airbag) and provides 12 essential reset services. It supports a wide range of global car brands and models from 1996 onwards, with lifetime free updates via Wi-Fi.
1.1 Vehicle Coverage
This diagnostic tool is specifically designed to work with all OBD II compliant vehicles, including Controller Area Network (CAN). A small number of 1994 and 1995 model year gasoline vehicles are OBD II compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the Vehicle Emissions Control Information (VECI) Label located under the hood or by the radiator. If the vehicle is OBD II compliant, the label will designate "OBD II Certified."
Government regulations mandate that all OBD II compliant vehicles must have a "common" 16-pin Data Link Connector (DLC).
Note: Some 1994 and 1995 vehicles have 16-pin connectors but are not OBD II compliant. Only those vehicles with a Vehicle Emissions Control Label stating OBD II Certified are OBD II compliant.
The CRP129i V3.0 supports 57+ global car brands and 10000+ vehicles from 2004-2025 models, including Diesel (12v only), 12V passenger cars, pickups, light-duty trucks, SUVs, gasoline vehicles, and Minivans, compatible with OBD2/EOBD/JOBD & CAN protocols.

Image: Global Vehicle Coverage Map showing supported regions (Asia, Europe, US, Australian) and examples of car brands.
1.2 OBD II Definitions
The OBD II system monitors emission control systems and key engine components. It provides information on:
- Whether the Malfunction Indicator Light (MIL) is commanded "on" or "off".
- Which, if any, Diagnostic Trouble Codes (DTCs) are stored.
- Readiness Monitor status.
Key terms:
- EOBD: European On-Board Diagnostics, similar to OBD II.
- Communication Protocols: Methods for vehicle systems to communicate (CAN Bus, J1850 VPW, ISO 9141-2, J1850 PWM, ISO 14230 KWP).
- PCM (Powertrain Control Module): The vehicle's "on-board computer" controlling engine management, emissions, and powertrain.
- DLC (Data Link Connector): The 16-cavity connector for diagnostic tool communication.
- MIL (Malfunction Indicator Light): "Check Engine" light.
- DTC (Diagnostic Trouble Code): Code stored in memory indicating a fault.
- Freeze Frame Data: Operating conditions stored when a DTC occurs.
- PID (Parameter Identification Data): Data returned by control modules.
- Monitors: Diagnostic routines in the PCM.
- Enabling Criteria: Vehicle-specific conditions for monitors to run.
- Trip: A drive cycle meeting enabling criteria for a specific monitor.
- Warm-up Cycle: Engine operation where temperature rises sufficiently.
- Fuel Trim (FT): Adjustments to the fuel schedule.
1.3 Diagnostic Trouble Codes (DTCs)
DTCs are stored by the on-board computer in response to a problem. They guide you to the fault area. Do not replace parts based solely on DTCs; consult the service manual for proper testing.
DTCs are five-digit alphanumeric codes:
- 1st character: Letter (B, C, P, U) identifies the main system (Body, Chassis, Powertrain, Network).
- 2nd character: Numeric digit (0-3) identifies code type (Generic or Manufacturer-Specific).
- 3rd character: Letter or numeric digit (0-9, A-F) identifies the specific system or sub-system.
- 4th and 5th characters: Letters or numeric digits (0-9, A-F) identify the section of the system malfunctioning.
1.4 Location of the Data Link Connector (DLC)
The DLC is typically a 16-pin connector. It is usually located 12 inches from the center of the instrument panel, under or around the driver's side for most vehicles. For some vehicles with special designs, the DLC location may vary. If the DLC cannot be found, refer to the vehicle's service manual.

Image: FCA SGW Access via AutoAuth, showing the diagnostic tool connected to a vehicle's OBD-II port.
2. Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the tool, read this user's manual carefully and observe the following safety precautions at a minimum whenever working on a vehicle:
- There are no user serviceable parts. Have the device serviced by a qualified repair person using only identical replacement parts. Disassembling the device will void the warranty.
- This tool contains an internal Lithium Polymer battery. To reduce the risk of fire or burns, do not disassemble, crush, pierce or dispose of the battery in fire or water.
- This product is not a toy. Do not allow children to play with or near this item.
- Do not expose the device to rain or wet conditions.
- Do not place the device on any unstable surface.
- Never leave the device unattended during charging. The device must be placed on a non-flammable surface during charging.
- Handle the device with care. If the device is dropped, check for breakage and any other conditions that may affect its operation.
- Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
- Keep the tool dry, clean, and free of oil, water or grease. Use a mild detergent on a clean cloth to clean the enclosure of the device when necessary.
- People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
- Always perform automotive testing in a safe environment.
- Do not attempt to operate or observe the tool while driving a vehicle. Operating or observing the tool will cause driver distraction and could cause a fatal accident.
- Wear safety eye protection that meets ANSI standards.
- Keep clothing, hair, hands, tools, test equipment, and other objects away from all moving or hot engine parts.
- Operate the vehicle in a well-ventilated work area. Exhaust gases are poisonous.
- Chock the drive wheels and never leave the vehicle unattended while running tests.
- Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.
- Put the transmission in P (for A/T) or N (for M/T) and make sure the parking brake is engaged.
- Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
- Don't connect or disconnect any test equipment while the ignition is on or the engine is running.
3. Product Description
3.1 Components & Controls

Image: LAUNCH CRP129i V3.0 main unit with numbered components.
- Charging LED: Red indicates charging, Green indicates fully charged.
- LCD: Displays test results.
- USB Type-C Port: Connects to the charging cable.
- DB-15 Diagnostic Connector: Connects the tool to the vehicle's DLC.
- Power Button: Turns the tool on or off.
- HOME Button: Navigates to the Job Menu screen.
- Selection Buttons (Up/Down/Left/Right): Move cursor for selection, or turn pages.
- OK Button: Confirms a selection or action.
- Return Button: Exits the current program or returns to the previous screen.
3.2 Technical Specifications
| Attribute | Value |
|---|---|
| Communication Interface | OBD-II |
| Free Update Period | Lifetime |
| Display Resolution | 1280*720P |
| Battery Included | Yes |
| Display Size | 5 inches |
| Wireless Support | Wifi |
| Special Features | Wifi |
| Software Update | Yes |
| Language | English, French, German, Italian, Japanese, Korean, Portuguese, Russian, Spanish, Traditional Chinese, Polish |
| Software Version | Newest version |
| Hardware Version | NEWEST |
| Brand Name | LAUNCH |
| Origin | Mainland China |
| Item Type | Code Readers & Scan Tools |
| Certification | CE |
| Model Name | CRP129i V3.0 OBD2 Scanner |
| Basic 4 System Diagnostic | Test Engine, ABS, Airbag, Transmission |
| 12 Reset Functions | reset EPB/Oil/Brake/SAS/BMS/ABS Bleeding/DPF/... |
| Print via Internet | |
| Update | lifetime free update |
| Screen size | 5 inches 1280*720P |
| Android version | Android 8.1 |
| Battery capacity | 3.7V/6000mAh |
| Packing size | 250*175*75 (mm) |
| Main diagnostic cable length | 120cm |
| Running memory | 2G |
| Storage space | 32GB (system shows 25.9GB) |
| Upgrade method | online upgrade |
| Main diagnostic cable interface | DB15 (double row) to OBDII 16PIN |
| WIFI | Yes |
| Bluetooth | No |
| Diagnostic level | Four-system basic diagnosis + full system and full function for shopping mall selection |
| Connection method | Wired |
| Registration required | No manual registration (automatically activated when connected to a wifi device) |
3.3 Packing List
The following packing list is for reference only. For details, consult the seller or check the packing list supplied with this tool together.

Image: Package contents including Main Unit, Quick Start Guide, User Manual, DC 5V Charging Cable, and OBDII Diagnostic Cable.
- Diagnostic tool x 1 (Main Unit)
- OBD II diagnostic cable x 1
- Charging cable x 1 (DC 5V Charging Cable)
- User manual x 1
- Carrying bag x 1
- Quick Start Guide x 1
4. Setup (Initial Use)
4.1 Charging the Tool
There are two charging methods available:
- Via Charging Cable: Plug one end of the included charging cable into the Type-C port of the tool, and the other end to an external power supply device.
- Via Diagnostic Cable: Insert one end of the diagnostic cable into the DB-15 connector of the tool, and the other end to the vehicle's DLC.
Once the charging LED illuminates solid green, it indicates that the battery is fully charged.
4.2 Getting Started
If it is the first time you have used this tool, you need to make some system settings:
- Press the power button to power it on.
- The screen displays a welcome page. Tap Start to go to the next step.
- Choose the desired system language, and tap Next step.
- Choose the desired time zone, and tap Next step to enter the WLAN setup screen.
- Slide the switch to ON. The system starts searching for all available wireless LANs. Choose the desired WLAN access point/network.
- If the selected network is open, you can connect it directly. If it is encrypted, enter the security key (network password).
- After the network connection is done, tap Next step to configure workshop information. Input the required information, and tap Next step to go to the next step.
Note: Once the workshop information has been configured, it will automatically be added to the report every time you generate a report successfully.
- Carefully read all terms and conditions of the user agreement, check the box before "Agree to all the above terms," and tap OK to finish the sign-up process and navigate to the Job Menu.
4.3 Easy to Use Steps

Image: Three steps for easy use: 1. Plug into OBDII port (16PIN), 2. Turn on ignition of your car, 3. Select menu to start diagnosis.
5. Operating
5.1 Job Menu
The main menu screen includes the following function modules:
- Local Diagnose: Configure it as a professional diagnostic tool.
- Service Function: Offers coding, reset, relearn, and more service functions.
- Other Modules: Includes add-on modules to extend functionalities.
- Upgrade: Updates vehicle diagnostic software and APK. (Requires stable network connection).
- Mall: Subscribe to extra vehicle diagnostic software or reset software.
- Mine: Check saved reports, order information, and system settings.
- Toolbox: Access practical add-on modules like battery voltage, diagnostic software clear, firmware fix, DTC library, diagnostic record, DLC lookup, feedback, image, user manual.
- More: Includes Online support and LAUNCH Academy.
5.2 Connection for Diagnosis
- Turn the ignition off.
- Locate the vehicle's 16-pin Data Link Connector (DLC).
- Plug one end of the diagnostic cable into the vehicle's DLC port, and the other end to the DB-15 diagnostic connector of the tool. Tighten the captive screws.
- Turn the ignition on. Engine can be off or running.
- Press the power button for several seconds to turn the tool on and enter the Job Menu.
Caution: Don't connect or disconnect any test equipment with the ignition on or engine running.
5.3 System Diagnostics (4 Core Systems)
This function diagnoses electronic control systems of a single vehicle model. Supported systems and functions vary by product configurations.

Image: Diagram illustrating the 4-in-1 diagnostic scan tool for Engine, Transmission, ABS, and SRS systems.
5.3.1 Engine System Scan

Image: Diagram showing the engine system scan process.
The engine system is the power core of the vehicle, converting fuel into power. It includes the engine, fuel supply, ignition, intake, and exhaust systems. The diagnostic tool helps detect engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions to enhance vehicle performance, save energy, and reduce exhaust emissions. Suitable for situations like a warning light on, loss of power, engine noise, rough idling, or abnormal fuel consumption. Retrieve fault codes (DTC) and check real-time sensor data to identify potential issues and enhance vehicle performance.
5.3.2 ABS System Scan

Image: Diagram showing the ABS system scan process.
The ABS system prevents wheel lockup during emergency braking to maintain control and stability. Read and clear DTCs and data flow in the ABS system. Performs various tests to check the operating conditions of the Anti-lock Braking System, and turn off the warning light. Suitable for abnormal brake feel (hard or soft), extended stopping distances. Read ABS-related fault codes and check the status of wheel speed sensors and pressure sensors.
5.3.3 SRS Airbag System Scan

Image: Diagram showing the SRS system scan process.
The SRS (Supplemental Restraint System) is made up of impact sensors, a control module, and the airbags themselves. This diagnostic device can detect every electronic parameter to check its health status. Read and clear fault codes in the SRS (Airbag) system and turn off the warning light of the airbag for making sure the engine works properly and safely. This is applicable in situations such as an illuminated SRS warning lamp, instances of airbag non-deployment or delayed deployment, following replacement of airbag system components (airbags, seat belt pretensioners, SRS ECU), or in cases of seat belt indicator malfunction.
5.3.4 Transmission System Scan

Image: Diagram showing the transmission system scan process.
The transmission system transmits engine power to the wheels, including the transmission, clutch, and drive shafts. Read and clear codes and view live data in transmission systems, keeping the transmission systems output optimally adapted to the speed and load. Retrieve the error information from Automatic Transmission (AT) which is a type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually. If you see a transmission warning light, experience rough shifting, or notice abnormal engine RPMs at different speeds, use the CRP129i V3.0 scanner to retrieve fault codes, check transmission fluid levels, and inspect sensors and actuators.
5.4 Smart Diagnosis (Auto-Detect)
This function allows quick access to the vehicle's electronic control systems by decoding the Vehicle Identification Number (VIN), without manual menu selection.
To enable: Tap Mine -> Settings to set "Automatic detection on connect" to On. After connection, turn the ignition key on, and the system enters auto-detect mode.
Alternatively, if "Automatic detection on connect" is Off, tap Local Diagnose -> AutoDetect to start the smart diagnosis manually.
Note: A highly stable and solid network connection is recommended for successful VIN access. Not all cars support the Auto-Detect function due to auto manufacturers' settings.
- Successful VIN Acquisition: If the system successfully obtains the VIN, confirm the information and tap OK to start diagnosing all available systems. A diagnostic report will be automatically generated.
- Failed VIN Acquisition: If the tool fails to access VIN information, it will prompt you to manually enter the VIN.
5.5 Manual Diagnosis
If the tool cannot obtain or analyze VIN information, you can perform vehicle diagnosis manually. In this mode, you execute menu-driven commands and follow on-screen instructions.
Note: Before diagnosing, ensure the corresponding vehicle manufacturer software is installed. The diagnostic menu may vary by vehicle make, model, and year.
Flowchart for Manual Diagnosis:
- Select Local Diagnose
- Select Vehicle Manufacturer
- Select Vehicle Model
- Select Scan Mode (Automatic System Detection or Manual System Selection)
- Select Test Function (Read Version Information, Read Fault Code, Clear Fault Code, Read Data Stream)
5.6 OBDII Diagnostics
This option provides a quick way to check for DTCs, isolate the cause of the illuminated Malfunction Indicator Lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform other emission-related services.

Image: Diagram illustrating various Full OBDII Modes including Read Code, Clear Code, Data Stream, I/M Readiness, Freeze Frame, On-Board System Test, O2 Sensor Test, EVAP System, Vehicle Information, and DTC Lookup.
After connecting the tool to the vehicle's DLC, tap OBD II on the Local Diagnose screen. The tool will automatically check the vehicle's computer to determine the communication protocol. Once a communication link is established, the screen will display the Monitor Status. Tap OK to view the function list:
- Read I/M Readiness: Checks if emissions-related systems are operating properly and ready for inspection/maintenance.
- Read Live Data: Retrieves and displays live data and parameters from the vehicle's ECU.
- Read Freeze Frame: Captures a snapshot of operating conditions when an emission-related fault occurs.
- Read Fault Code: Displays detailed information of DTC records.
- Clear Fault Code: Erases codes from the vehicle. Ensure ignition is ON and engine is OFF before performing.
- Test Results: On-Board Monitoring Test: Retrieves test results for non-continuously monitored powertrain components.
- Control Operation of On-Board Component/System: Accesses vehicle-specific subsystem and component tests.
- Read Vehicle Information: Retrieves VIN, Calibration ID (CID), and Calibration Verification Number (CVN).
- EU OBFCM: On-Board Fuel Consumption Monitoring data.
5.7 Service Functions (12 Resets)
The tool offers coding, reset, relearn, and other service functions to restore vehicle systems after repair or replacement. Available tests vary by vehicle manufacturer, year, and model. Updates are regularly provided.

Image: Overview of 12 Maintenance Services including ABS Bleeding, Air/Fuel Reset, AdBlue Reset, AFS Headlamp Reset, Oil Reset, Battery Matching, EPB Reset, Throttle Adaptation, TPMS Reset, Injector Coding, DPF Regen, SAS Calibration.

Image: Visual representation of 12 Hot Reset Services.
To perform a reset operation:
- Select Service Function
- Choose the desired service function
- Select the desired car brand
- Select the reset mode (available modes vary by vehicle)
- Follow the on-screen instructions to proceed.
The 12 available reset services include:
- Oil Lamp Reset Service: Resets the Engine Oil Life system after an oil change.
- SAS Steering Angle Sensor Reset: Resets the steering angle to zero.
- Electronic Throttle Position Reset: Initializes throttle actuators and returns learned values to default.
- BMS Reset/Battery Matching: Resets the vehicle battery monitoring unit and performs battery matching.
- DPF Reset: Clears PM (Particulate Matter) from the DPF filter.
- Injector Coding: Writes or rewrites injector codes in the ECU for accurate injection quantity control.
- RESET ETS/ELEC.THROTTLE RLRN: Initializes the throttle actuator.
- ABS Bleeding: Performs ABS bleeding procedures.
- TPMS RESET: Resets the Tire Pressure Monitoring System.
- AFS RESET: Resets the Adaptive Front-lighting System.
- A/F Adjust: Adjusts Air/Fuel ratio.
- AdBlue Reset: Resets AdBlue system.
6. Maintenance
6.1 Upgrade
If new software or APK updates are available, a numeric indicator will display on the Upgrade module. Tap Upgrade on the Job menu to enter the update center. By default, all diagnostic software is selected. To deselect specific software, tap Unselect and uncheck the box next to the vehicle model.
Tap Update to start downloading. It may take several minutes. To pause, tap Stop; to resume, tap Continue. If network connection fails, tap Retry. Once downloaded, software packages will install automatically.
The free subscription for default software can be viewed by checking the expiration date. Renewal is required after expiration. Without subscription, new diagnostic software and versions (except downloaded software) are restricted.
6.2 Diagnostic Software Clear
This item allows you to delete diagnostic software that is not frequently used.
6.3 Firmware Fix
Use this module to upgrade and fix diagnostic firmware. Do not cut power or switch to other interfaces during fixing.
6.4 Clean Up
This option allows you to clear cache files and free up storage space.
7. Troubleshooting
7.1 DTC Library
This option allows you to retrieve detailed descriptions of specific DTCs from the DTC database. Swipe the screen upwards/downwards to alter the value, then press OK. The screen will display the definition of the DTC.
7.2 Feedback
This module allows you to send feedback on diagnostic problems to LAUNCH for analysis and troubleshooting.
7.3 FAQ (Frequently Asked Questions)
This module lists frequently asked questions and answers related to the tool.
7.4 Diagnostic Record
This module stores running parameters or waveform graphs recorded by the user. Tap Diagnostic Record to enter and select desired data stream items.
7.5 Data Record Playback

Image: Diagram showing the process of generating, sharing, and printing an auto diagnostic report.
The tool allows you to record and save Live Data as valuable information for troubleshooting and diagnosis. All diagnostic records can be accessed from Toolbox -> Diagnostic Record. You can also generate a diagnostic report to list detailed inspection results and share them via email.
7.6 Live Data Stream Analysis

Image: Real-Time BAT Voltage Monitoring, showing voltage levels (Too Low, Normal, Slightly Low, Too High) and a graph of battery voltage over time.
The scanner shows live sensor data and provides data graphing for intuitive diagnostics and monitoring vehicle performance, helping to analyze abnormal parameters. There are 3 types of display modes:
- Value: Displays parameters with numbers and lists.
- Graph: Displays parameters with wave patterns.
- Combine: Merges graphs for data comparison (up to 8 data stream items).
7.7 Real-Time Battery Voltage Graphing

Image: Real Time Battery Voltage Graphing, showing a graph of battery voltage over time.
Check the battery status in real time and eliminate easily overlooked battery problems. This option can measure the current voltage of the vehicle's battery.
8. User Tips
- Vehicle Compatibility: While the tool supports 57+ car brands and 10000+ models from 2004-2025, always verify compatibility for specific vehicle models (e.g., Maxus, JETOOR DASHING, GWM POER 2025) by checking the vehicle's OBD II certification and consulting the manufacturer's specifications if unsure.
- Power Input: The OBD II interface input voltage is 9V~18V. Do NOT use this scanner for commercial vehicles, as doing so may damage the machine.
- Network Connection for Updates: A stable and solid network connection is crucial for successful VIN access and software updates. Ensure your Wi-Fi connection is strong when performing these operations.
- Data Backup: Before performing any major resets or clearing fault codes, consider saving a diagnostic report to retain valuable information that might help in future troubleshooting.
- Battery Care: Avoid leaving the device unattended during charging and always place it on a non-flammable surface.
9. Warranty and Support
9.1 Warranty
This warranty is expressly limited to persons who purchase LAUNCH products for purposes of resale or use in the ordinary course of the buyer's business.
LAUNCH electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty does not cover any part that has been abused, altered, used for a purpose other than for which it was intended, or used in a manner inconsistent with instructions regarding use. The exclusive remedy for any automotive meter found to be defective is repair or replacement, and LAUNCH shall not be liable for any consequential or incidental damages.
Final determination of defects shall be made by LAUNCH in accordance with established procedures. No agent, employee, or representative of LAUNCH has any authority to bind LAUNCH to any affirmation, representation, or warranty concerning LAUNCH automotive meters, except as stated herein.
9.2 Customer Service
If you have any questions on the operation of the unit, contact the seller, or contact LAUNCH TECH Service Center:
- Website: https://en.cnlaunch.com
- Phone: +86 755 8455 7891
- Email: overseas.service@cnlaunch.com
10. Compliance Information
FCC ID: XUJCRP123XV3
IC: 29886-CRP129IV3
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Innovation, Science and Economic Development Canada's licence-exempt RSSs and part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference; and
- This device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
The device for operation in the band 5150-5250MHz is only for indoor use.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information
This product meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
RF Exposure Information and Statement
The SAR limit is 1.6 W/kg averaged over one gram of tissue. This device has also been tested against this SAR limit. This device was tested for typical body-worn operations 0mm from the body. To maintain compliance with RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user's body, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.