FURYCUBE G11 Wireless Gaming Mouse User Manual

1. Introduction

Thank you for choosing the FURYCUBE G11 Wireless Gaming Mouse. This high-performance, ultra-lightweight mouse is designed for gamers, offering exceptional precision, speed, and comfort. Featuring tri-mode connectivity (2.4G wireless, Bluetooth, and wired USB-C), an esports-grade PAW3311 sensor, customizable RGB lighting, and a durable hollow design, the G11 provides an unparalleled gaming experience. This manual will guide you through the setup, operation, and maintenance of your new gaming mouse.

2. Product Overview

2.1. Key Features

• Tri-Mode Connectivity: Seamlessly switch between 2.4G wireless, Bluetooth, and wired USB-C connections for versatile use across different devices.
• Ultra-Lightweight Design: Weighing approximately 67g with a 29-hole hollow design for enhanced breathability and reduced fatigue during extended use.
• Esports-Grade PAW3311 Sensor: Delivers ultra-sensitivity and precision with up to 22000 DPI, 300 IPS tracking speed, and 35G acceleration for accurate and stable control.
• Customizable RGB Lighting: Six personalized ambient modes including Colorful single stream, Monochrome breathing, Colorful constant on, Neon light effect, Mixed color breathing, and Gradient Light Effect.
• High-Performance Main Control Chip: Equipped with the Flagship BK3533 chip for high performance, low power consumption, and strong battery life.
• Global Mechanical Micro Switches: Offers over 100 million service life with a softer, springier click feel and millisecond response time.
• Ergonomic Design: Comfortably fits various grip styles (grip, finger grip, palm grip) and hand sizes.
• Long-Lasting Battery: Integrated 400mAh lithium battery provides up to 180+ hours of continuous use.

2.2. Package Contents

• FURYCUBE G11 Wireless Gaming Mouse
• Wireless Receiver (USB-A dongle)
• Charging/Data Braided Cable (USB-C to USB-A)
• User Manual

3. Specifications

Figure 3.1: FURYCUBE G11 Product Parameter Table

3.1. Package Dimensions

• Length: 23 cm
• Width: 13 cm
• Height: 7 cm
• Weight: 0.188 kg

4. Setup

4.1. Connecting Your Mouse

The FURYCUBE G11 mouse supports three connection modes: 2.4G Wireless, Bluetooth, and Wired USB-C. You can switch between these modes using the selector switch located on the bottom of the mouse.

Figure 4.1: Tri-mode connection options

4.1.1. 2.4G Wireless Connection

1. Locate the USB wireless receiver in the mouse packaging.
2. Plug the USB wireless receiver into an available USB port on your computer.
3. Slide the mode switch on the bottom of the mouse to the "2.4G" position.
4. The mouse should automatically connect to your computer.

4.1.2. Bluetooth Connection

1. Slide the mode switch on the bottom of the mouse to the "BT" (Bluetooth) position.
2. On your computer or device, open Bluetooth settings.
3. Search for new devices and select "FURYCUBE G11" (or similar name) from the list.
4. Follow any on-screen prompts to complete the pairing process.

4.1.3. Wired USB-C Connection

1. Connect the provided USB-C to USB-A braided cable to the USB-C port on the front of the mouse.
2. Plug the USB-A end of the cable into an available USB port on your computer.
3. The mouse will function as a wired mouse and will also charge its internal battery.

4.2. Driver Software

The FURYCUBE G11 supports driver software for advanced customization. Please visit the official FURYCUBE website to download the latest drivers for your operating system (Windows compatible).

5. Operating Instructions

5.1. DPI Adjustment

The mouse features a 6-speed adjustable DPI setting, allowing you to customize sensitivity up to 22000 DPI. Use the dedicated DPI button (usually located behind the scroll wheel) to cycle through the preset DPI levels. Refer to the driver software for fine-tuning DPI settings and assigning specific values to each level.

Figure 5.1: Agility Tracking with 22000 DPI Sensor

5.2. RGB Lighting Control

The FURYCUBE G11 features dynamic RGB desktop lighting with six personalized ambient modes. These modes can typically be cycled through using a dedicated button on the mouse or customized via the driver software.

Figure 5.2: RGB Desktop Lighting with Six Personalized Modes

Available lighting modes include:

• Colorful single stream
• Monochrome breathing
• Colorful constant on
• Neon light effect
• Mixed color breathing
• Gradient Light Effect

5.3. Charging the Mouse

When the battery is low, connect the mouse to your computer using the provided USB-C cable. The mouse can be used normally while charging. The 400mAh battery provides up to 180+ hours of continuous use on a full charge.

Figure 5.3: Charging the FURYCUBE G11 Mouse

6. Maintenance

6.1. Cleaning

• Use a soft, dry cloth to wipe the surface of the mouse.
• For the hollow areas, use compressed air to remove dust and debris.
• Avoid using harsh chemicals or abrasive materials, as these can damage the mouse's finish and internal components.

6.2. Battery Care

• To prolong battery life, avoid fully discharging the mouse frequently.
• Charge the mouse regularly, especially if it will be stored for an extended period.
• Do not expose the mouse to extreme temperatures.

7. Troubleshooting

7.1. Mouse Not Responding

• Check Battery: Ensure the mouse is charged. Connect it via USB-C cable to see if it powers on.
• Check Connection Mode: Verify the mode switch on the bottom of the mouse is set correctly (2.4G, BT, or OFF).
• 2.4G Wireless: Ensure the USB receiver is securely plugged into a working USB port. Try a different USB port.
• Bluetooth: Re-pair the mouse with your device. Ensure Bluetooth is enabled on your device.
• Wired: Ensure the USB-C cable is securely connected to both the mouse and the computer. Try a different USB port or cable.
• Restart: Restart your computer and try connecting again.

7.2. DPI Not Changing

• Ensure the mouse is powered on and connected.
• Press the DPI button to cycle through settings.
• If using custom settings, check the driver software to ensure it is running and configured correctly.

7.3. RGB Lighting Not Working

• Check if the mouse is powered on.
• Cycle through the lighting modes using the dedicated button (if available).
• Verify lighting settings within the driver software.

8. User Tips

• Optimize for Gaming: For competitive gaming, consider using the 2.4G wireless or wired connection for the lowest latency and most stable performance.
• Customization: Install the FURYCUBE driver software to unlock full customization options for DPI, button assignments, and RGB lighting effects.
• Ergonomics: Experiment with different grip styles (palm, claw, fingertip) to find what feels most comfortable and efficient for your gaming or work style. The G11's ergonomic design supports various grips.
• Battery Management: If you primarily use the mouse wirelessly, get into the habit of plugging it in to charge overnight or during breaks to ensure it's always ready for use.

9. Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact the seller directly. Keep your proof of purchase for any warranty claims.