MICTUNING BC80

Contents

MICTUNING B Series BC80-8 Group Wireless Switch Panel User Manual

Model: BC80 | Brand: MICTUNING

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MICTUNING B Series BC80-8 Group Wireless Switch Panel with Power Hub. Please read this manual thoroughly before using the product to ensure proper function and safety.

The MICTUNING BC80 is designed to provide wireless control for up to 8 auxiliary devices in your vehicle, featuring a dual-power hub system for flexible placement and enhanced control capabilities. It supports 12V/24V systems and offers four distinct control modes for various applications.

2. Product Overview Video

Video: A brief overview and demonstration of the MICTUNING BC80 Wireless Switch Panel's features and functionality.

3. Package Contents

Ensure all items listed below are present in your package:

  • Switch Panel X1
  • Power Hub X2
  • Terminal Connector X16
  • Bracket X1
  • Screwdriver X1
  • Fuse X8
  • Wire X4
  • USB Cable X1
  • AAA Battery X2
  • Screw X10
Complete Package Contents of MICTUNING BC80

Image: All components included in the MICTUNING BC80 Wireless Switch Panel package.

4. Specifications

FeatureSpecification
Product TypeSwitches and accessories
Item TypeSwitch Panel
Working Voltage12V/24V DC
Max Current60A
Max Power720W@12V, 1440W@24V
Operating Temperature-22°F to 185°F (-30°C to 85°C)
Wireless Control RangeUp to 164 feet
Power Source (Panel)AAA Batteries (Included) / USB Cable (Included)
Wireless Switch Panel Dimensions and Specifications

Image: Visual representation of the wireless switch panel with dimensions and key specifications.

5. Setup and Installation

5.1. Power Hub Wiring

The power hub requires proper electrical connections to function. Follow the diagram below for correct wiring:

  • Connect the blue wire to the ACC (Accessory) circuit. This is typically required for normal operation.
  • Connect the red wire to the positive terminal of your vehicle's battery.
  • Connect the black wire to the negative terminal of your vehicle's battery.

Note:

  • The power hub typically requires an ACC connection for normal operation.
  • If vehicle battery drain is not a concern, it may also be connected directly to the battery positive terminal.
4-Gang Power Hub Wiring Diagram

Image: Detailed wiring diagram for the 4-Gang Power Hub, showing connections for ACC, positive, and negative terminals, along with circuit ratings.

Dual Battery System Wiring Example

Image: Illustration of the power hub setup, highlighting its suitability for dual battery systems and ACC connection.

Before and After Wiring with Power Hub

Image: Comparison showing a messy wiring setup before and a tidy setup after installing the power hub.

5.2. Switch Panel Pairing

The wireless switch panel needs to be paired with the power hub(s) to function. The BC80 supports pairing two groups of switches (first four and last four) to separate power hubs, or even multiple power hubs for each group.

Pairing Group 1 (First Four Switches)

  1. Ensure the Switch Panel and Power Hub are powered on. Turn on the switch panel by short pressing any two switches simultaneously. The white backlight will light up, indicating standby state.
  2. Press the Pairing Button on Power Hub 1. The power hub's indicator light will illuminate, signifying it has entered pairing mode.
  3. Press any one of the first four switches (e.g., "HORN", "LIGHT BAR", "LIGHT CUBES", "FRONT") on the Switch Panel.
  4. When Power Hub 1's indicator flashes and then goes off, the pairing is successful.

Pairing Group 2 (Last Four Switches)

  1. Ensure the Switch Panel and Power Hub are powered on. Turn on the switch panel by short pressing any two switches simultaneously. The white backlight will light up, indicating standby state.
  2. Press the Pairing Button on Power Hub 2. The power hub's indicator light will illuminate, signifying it has entered pairing mode.
  3. Press any one of the last four switches (e.g., "AMBER", "LIGHT BAR", "LIGHT CUBES", "ROCK") on the Switch Panel.
  4. When Power Hub 2's indicator flashes and then goes off, the pairing is successful.

Note:

  • Each panel group (first four switches or last four switches) allows connection of up to 3 power hubs. This enables control of multiple devices across different vehicles or locations.
Easy Pairing Instructions for MICTUNING BC80

Image: Visual guide for the easy pairing process of the switch panel with a power hub.

Detailed Pairing Steps for Multiple Power Hubs

Image: Step-by-step instructions for pairing the switch panel with up to three power hubs for each group of switches.

6. Operating Instructions

6.1. Basic Operation

  • Standby State: To enter standby, press any two buttons on the panel at the same time. The white backlight will light up.
  • Working State: From standby, press any single button to activate the connected device. The yellow indicator for that button will light up.
  • Power Off: To power off the panel, press any two buttons simultaneously again. All indicators will turn off.

6.2. Control Mode Setting

The BC80 offers four customizable control modes for each switch:

  • Constant Light: Device stays on until manually turned off.
  • Strobe: Device flashes rapidly.
  • Flash: Device blinks slowly.
  • Momentary: Device is active only while the button is pressed.

How to Set Control Modes:

  1. Enter Setting State: Long-press any two buttons on the panel simultaneously for 3 seconds. The white backlight will turn off, and yellow indicators will light up/start flashing, indicating entry into the setting state.
  2. Assign Modes to Switches: Press any individual button repeatedly to cycle through the four modes (Constant Light, Strobe, Flash, Momentary). Observe the yellow indicator's behavior to confirm the selected mode. Set all switches to your desired mode.
  3. Save Your Setting: Long-press any two buttons simultaneously for 3 seconds again. The yellow indicator will flash once and then turn off, confirming that the settings are complete and saved.

Important Note:

  • After saving settings, please wait for 2 seconds before turning off the panel to avoid saving failure.
4 Control Modes for MICTUNING BC80

Image: Visual examples of the four control modes: Flash, Toggle, Momentary, and Strobe.

7. User Tips

  • Dual Battery Systems: The dual-power hub design is ideal for vehicles with dual battery setups, allowing you to distribute power and control devices more efficiently across the front and rear of your vehicle.
  • Expandable Control: Each group of four switches on the panel can be connected to up to three separate power hubs. This means a full 8-gang switch panel can control a total of six power hubs, offering extensive control over multiple devices or even multiple vehicles. Additional power hubs can be purchased separately if needed.
  • Backup Power: The auxiliary control panel can be powered by either a USB cable or AAA batteries. When plugged in via USB, it uses USB power. If batteries are inserted, they act as an instant backup, seamlessly taking over if the USB power is disconnected, ensuring continuous control.
Control Multiple Devices with MICTUNING BC80

Image: Illustration showing the capability to control multiple devices or vehicles using the BC80 system.

8. Troubleshooting

  • Panel Not Responding:
    • Check if the AAA batteries in the switch panel are depleted or incorrectly inserted.
    • Ensure the USB cable is securely connected if using USB power.
    • Verify that the power hubs are receiving power from the vehicle's battery and ACC connection.
  • Devices Not Activating:
    • Confirm that the switch panel is successfully paired with the correct power hub(s) as per the pairing instructions.
    • Check the wiring connections between the power hub and the auxiliary devices.
    • Inspect fuses in the power hub for any blown fuses. Replace if necessary.
    • Ensure the selected control mode for the switch is appropriate for the device (e.g., Constant Light for continuous operation).
  • Pairing Issues:
    • Make sure both the switch panel and power hub are in pairing mode simultaneously.
    • Ensure you are pressing the correct switches for the desired group (first four for Power Hub 1, last four for Power Hub 2).
    • Try resetting both the switch panel and power hub by disconnecting power for a few seconds and then reattempting the pairing process.
  • Settings Not Saving:
    • Ensure you perform the long-press of any two buttons for 3 seconds to save the settings after configuring control modes.
    • Wait for at least 2 seconds after saving before powering off the panel.

9. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the switch panel and power hubs. Avoid using harsh chemicals or abrasive cleaners.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
  • Fuses: The power hub contains fuses for circuit protection. If a device stops working, check the corresponding fuse and replace it with a fuse of the same rating if blown.
  • Battery Replacement: If the switch panel is powered by AAA batteries, replace them when the panel's performance degrades or it fails to power on.

10. Warranty and Support

MICTUNING products are designed for durability and performance. For detailed warranty information and customer support, please refer to the official MICTUNING website or contact their customer service directly.

A comprehensive user manual in PDF format is available for download. You can access it via this link: MICTUNING BC80 User Manual (PDF).

For any issues or questions not covered in this manual, please reach out to MICTUNING customer support.

© 2024 MICTUNING. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.