Varstrom VSM01 750W 48V

Contents

Varstrom VSM01 750W 48V Mid Drive Motor Kit

Electric Bicycle Conversion Kit User Manual

1. Safety Information

⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage of batteries.

  • Always wear appropriate safety gear when installing or operating the e-bike kit.
  • Ensure all connections are secure and properly insulated to prevent short circuits.
  • Do not modify the motor or battery system in any way not specified in this manual.
  • Keep children and pets away from the installation area.
  • Store batteries in a cool, dry place away from direct sunlight and flammable materials.

2. Product Overview

The Varstrom VSM01 is a 2026 mid-drive motor kit designed to transform your standard bicycle into a powerful and intuitive electric bike. It features a high-precision torque sensor for a natural riding feel, a smart Hall system for enhanced reliability, and a durable design with efficient cooling. This kit is suitable for various riding styles, from commuting to trail riding.

Varstrom VSM01 Motor Kit components
Figure 2.1: Varstrom VSM01 Motor Kit components including motor, display, battery (optional), and accessories.

Key Features:

  • Dual Voltage Compatibility: Designed for 48V, also compatible with 36V batteries (not 52V).
  • True Torque Sensor: Provides instant, smooth, and proportional power for a natural pedal-assist feel, enhancing range by +20%.
  • Intelligent Hall System: Features a dual-mode Hall sensor system with a backup 'Virtual Hall' mode, reducing failure likelihood by 40%.
  • Enhanced Cooling: Wider, robust cooling fins improve heat dissipation and motor efficiency by +5%.
  • Anti-Wobble Spacer: Protects the bike's bottom bracket from wear and ensures stable installation.
  • Universal Fit: Compatible with standard 68-73mm bottom brackets, fitting over 90% of bicycles.
  • DZ41 LCD Display: Easy-to-use display showing speed, battery level, distance, and 5 levels of pedal assist, with a 25 km/h speed limit setting.

3. Specifications

AttributeValue
Brand NameVarstrom
Motor ModelVarstrom VSM01
Motor TypeSide Hung Motor (Mid Drive)
DesignBrushless
Power750W
Wattage> 400W
Rated Voltage48V
Compatible Voltage36V/48V Transformer Compatibility
PAS SensorTorque Sensor
MAX Torque130N.M
TOP Speed43KM/H
Waterproof RatingIP66
Weight4KG
No-load Speed120±5 Rpm
PAS Level0-5 Pas
Tooth Disc44T
Crank Length170MM
Booster Starting Angle10°
Max Current of Controller18A±0.5A
Speed Sensor Mounting Distance8-15MM
Bracket Bottom Length68mm-73mm
Motor Operation Temperature-20℃-45℃
Brake SystemBrake lever / Brake Sensor
CertificationCE

Packing List:

The Varstrom VSM01 kit includes the following components:

Packing list for Varstrom VSM01 motor kit
Figure 3.1: Visual representation of the components included in the VSM01 kit.
  • 1 x VSM01 48V750W Mid Drive Motor
  • 1 x DZ41 LCD Display
  • 1 x Speed Sensor
  • 1 x 44T Chainring with Guard
  • 1 x Pair of Cranks (170mm)
  • 1 x 1T4 Cable
  • 1 x Set of Installation Screws & Spacer
  • 1 x Pair of Brake Levers/Sensor (Optional, based on selection)
  • Battery (Optional, various types available, e.g., 36V13Ah, 48V16Ah, 48V20Ah, 48V25Ah, 48V30Ah, 36V20.8Ah Rear Rack, 48V18.2Ah Rear Rack. If 'NO BATTERY' is selected, it is not included.)

4. Setup and Installation

4.1. Compatibility Check

Before installation, ensure your bicycle frame is compatible with the VSM01 motor kit. The motor is designed for a standard bottom bracket length of 68-73mm. The inner diameter should be between 33.5-36mm, and the thickness should be less than or equal to 12mm. This kit is not compatible with belt drive chainrings or coaster bikes.

Bike compatibility check for bottom bracket and thickness
Figure 4.1: Guide for checking bicycle frame compatibility with the motor kit.
Motor compatibility check with measurements
Figure 4.2: Detailed measurements for bottom bracket compatibility.

4.2. Motor Installation

The VSM01 mid-drive motor installs directly into your bike's bottom bracket. Follow these general steps:

  1. Remove your bike's existing crankset and bottom bracket.
  2. Install the VSM01 motor into the bottom bracket shell, ensuring the anti-wobble spacer is correctly positioned to protect wiring and frame.
  3. Secure the motor with the provided lock nuts and installation screws.
  4. Attach the 44T chainring with its protective guard to the motor.
  5. Install the cranks (170mm) onto the motor spindle.
  6. Mount the speed sensor on the rear wheel, ensuring the magnet passes within 8-15mm of the sensor.
  7. Install the DZ41 LCD display on your handlebars (fits Ø22.2 holder size).
  8. Connect all cables: motor to display, speed sensor, and 1T4 cable for accessories.
Installation and wiring diagram for Varstrom VSM01 motor kit
Figure 4.3: Comprehensive installation and wiring diagram.

4.3. Brake Type Selection and Installation

Choose the appropriate brake component based on your bike's existing brake system:

  • For Mechanical Brakes or if replacing: Use the provided Brake Levers.
  • For Hydraulic Brakes (to retain original levers): Use the Brake Sensors.
Brake type selection guide (lever vs. sensor)
Figure 4.4: Guide for selecting and installing the correct brake type.

4.4. Battery Installation (If purchased with kit)

Depending on your battery choice, follow the specific installation instructions:

Downtube Battery Installation:

  1. Remove the lithium battery guide rail.
  2. Fix the guide rail to the frame.
  3. Slide the battery onto the installed rail.
  4. Ensure the downtube battery installation is complete and secure.
Downtube battery installation steps
Figure 4.5: Step-by-step guide for downtube battery installation.

Rear Rack Battery Installation:

  1. Assemble the rear rack onto your bicycle.
  2. Mount the battery base onto the rear rack.
  3. Slide the battery into the base, ensuring it locks securely.
  4. Connect the battery to the motor system.
Rear rack battery installation steps
Figure 4.6: Step-by-step guide for rear rack battery installation.

5. Operating Instructions

5.1. Powering On/Off

  • To Power On: Ensure the battery is connected and turn the battery's power switch to the 'I' position. The DZ41 LCD display will wake up in approximately 3 seconds.
  • To Power Off: Turn the battery's power switch to the 'O' position. The display will turn off.
Downtube battery details showing power switch
Figure 5.1: Downtube battery features, including the power switch.

5.2. DZ41 LCD Display Functions

The DZ41 LCD display is your control center, providing essential riding information and settings:

DZ41 LCD Display features and interface
Figure 5.2: Overview of the DZ41 LCD Display interface and its indicators.
  • Walking Assisted: Indicator for walk-assist mode.
  • Headlight: Indicator for headlight status.
  • PAS Level: Displays the current Pedal Assist System level (0-5). Adjust using the '+' and '-' buttons.
  • Subtotal Mileage (TRIP): Distance covered during the current ride.
  • Total Mileage (ODO): Total distance covered by the e-bike.
  • Speed Mode: Indicates the current speed mode.
  • Real-time Speed: Displays your current riding speed.
  • Speed Unit: Shows speed in MPH or KM/H.
  • Mileage Unit: Shows distance in Miles or Kilometers.
  • Power Level: Indicates the remaining battery power.
  • Speed Limit Setting: The display allows setting a 25 km/h speed limit for legal road use. Consult local regulations.

5.3. Riding Modes

The VSM01 motor supports various riding modes:

  • Pedal Assist Mode: The motor provides assistance based on your pedaling effort (torque sensor). This is the primary and most efficient mode.
  • Throttle Ebike Mode: If a throttle is installed, you can use it to propel the bike without pedaling.
  • Walk Assist Mode: Provides low-speed assistance for walking the bike, useful for pushing it up inclines.
Motor features with riding modes
Figure 5.3: Illustration of different riding modes supported by the VSM01 motor.

6. Maintenance

6.1. General Care

  • Regularly clean your e-bike and the motor unit with a damp cloth. Avoid high-pressure washing directly on electrical components.
  • Check all bolts and connections periodically to ensure they are tight and secure.
  • Lubricate your chain regularly.
  • Inspect brake pads and cables for wear and tear.

6.2. Battery Care

  • Charging: Always use the original charger provided with your battery. Do not overcharge or completely drain the battery.
  • Storage: If storing the battery for an extended period, charge it to about 50-60% and store it in a cool, dry place. Recharge every 1-2 months to maintain battery health.
  • Temperature: Avoid exposing the battery to extreme temperatures (below -20℃ or above 45℃).
  • Protection: The battery features a Comprehensive Battery Safety Protection System with an Intelligent 30A BMS, offering overcurrent, overvoltage, overpower, overdischarge, temperature, short circuit, overcharge protection, and real-time cell balancing.
Battery cell safety and core protections
Figure 6.1: Diagram illustrating the comprehensive battery safety protection system.

6.3. Motor Care

  • The VSM01 motor has an IP66 waterproof rating, meaning it is protected against dust and powerful water jets. However, avoid submerging the motor.
  • The enhanced cooling fins help dissipate heat; ensure they are kept clean and free from obstructions.
  • The Anti-Wobble Spacer helps maintain the integrity of the bottom bracket; periodically check for any looseness.

7. Troubleshooting

The VSM01 motor is designed for high reliability with its Intelligent Hall System, which includes a backup 'Virtual Hall' mode to prevent common sensor failures. If you encounter issues, consider the following:

  • No Power to Display/Motor:
    - Check if the battery is charged and properly connected.
    - Ensure the battery's power switch is in the 'ON' position.
    - Inspect all cable connections for looseness or damage.
  • Motor Not Assisting:
    - Check the PAS level on the display; ensure it's not set to 0.
    - Verify the speed sensor and magnet are correctly aligned and within the 8-15mm distance.
    - Ensure brake levers/sensors are not engaged, as they cut motor power.
  • Unusual Noises from Motor:
    - Check for any loose components around the bottom bracket or chainring.
    - Ensure the anti-wobble spacer is correctly installed.
  • Display Not Working:
    - Check power connection to the display.
    - If the display is unresponsive, try powering off and on the entire system.

For persistent issues, please contact Varstrom customer support.

8. User Tips

  • Bottom Bracket Measurement: Always double-check your bike's bottom bracket size (68-73mm) and inner diameter (33.5-36mm) before ordering to ensure compatibility.
  • Brake Choice: If you have hydraulic brakes and wish to keep your original levers, opt for the brake sensors instead of brake levers.
  • Spare Parts: If you need spare parts for this new model, contact Varstrom customer support directly for availability.
  • Legal Speed Limits: Utilize the 25 km/h speed limit setting on the DZ41 display when riding on public roads to comply with local regulations.

9. Warranty and Support

Varstrom is committed to providing high-quality products and excellent customer service. Our warranty policy is as follows:

Warranty Service table
Figure 9.1: Overview of Varstrom's warranty service periods.
  • Motor & Battery: 12 months quality warranty.
  • Accessories & Parts: 30-day warranty for quality assurance.

Local Expertise: Our network of certified service centers across the EU and UK ensures prompt repairs and support. For any warranty claims or technical assistance, please contact Varstrom customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.