1. Product Overview
The Yieryi Solar WiFi Smart Water Timer YG-344 is an intelligent water valve controller designed for automatic irrigation systems. It features photovoltaic charging, WiFi connectivity for mobile remote watering, rain sensing, child lock functionality, a built-in battery, and timer settings. This device is ideal for various outdoor watering applications including villa courtyards, balcony gardens, roof gardens, family green walls, three-dimensional greening micro-spray, site engineering dust removal, vegetable garden drip irrigation, and general spray irrigation.
The controller is built with UV-resistant material and meets IPX6 waterproof standards, making it resistant to rainstorms. It offers 4 independent watering zones, allowing for precise and customized irrigation programs.

2. Setup
2.1 Physical Installation
- Pre-assembly Test: Before assembling, run a test on the host to ensure it functions correctly. Only proceed with laying water pipes and installing accessories after confirming there are no faults.
- Faucet Connection: The timer features a 360° movable connector for easy installation, even in narrow spaces. It is compatible with 1/2" and 3/4" hose faucets using the provided adapters. Ensure your faucet has a coarse external thread for proper connection. Unthreaded or plastic faucets are not recommended due to potential leakage or detachment.
- Water Inlet Filter: The movable joint contains a stainless steel filter screen to block sediment and stones, preventing clogging. It is recommended to clean this filter screen at regular intervals.
- Water Pressure: The device requires a water pressure of 0.5 bar - 8 bar (7.25 psi - 116 psi). Water tanks, water towers, or wells may not provide sufficient pressure; external pressurization might be necessary.
- Placement: This watering device is suitable for outdoor use only and cannot be installed indoors. For optimal solar charging, place it in a location with direct sunlight exposure.




2.2 Powering On and Charging
The timer is primarily solar-powered via its integrated solar panel. For initial use or during periods of low sunlight, ensure the timer is fully charged. A Type-C charging port is reserved at the bottom for backup charging.
- Solar Charging: Continuous exposure to sunlight keeps the water timer running throughout the year. The solar panel can be rotated and adjusted up to 90 degrees to optimize direct sunlight angle.
- Type-C Charging: If used indoors or during extended cloudy periods, plug in a USB charging cable to the Type-C port to avoid insufficient power.
- Indicator Light: A slow flashing red light indicates charging. The red light turns off when the battery is fully charged.


2.3 App Installation and Connection
The Yieryi Smart Water Timer connects to the 'Smart Life' or 'Tuya Smart' app for remote control and monitoring.
- Download the App: Search for and install "Smart Life" or "Tuya Smart" from your device's App Store (iOS) or Google Play Store (Android). Alternatively, scan the QR code provided in the manual.
- Network Requirements: Ensure your smartphone is connected to a 2.4GHz WiFi network and that Bluetooth is enabled. The device does not support 5GHz WiFi.
- Enter Pairing Mode: Press and hold the WiFi button on the device for 5 seconds to wake up the host and enter distribution network mode. The red indicator light will start flashing. If it doesn't turn on, try long-pressing again.
- Add Device in App: Place your phone and the device close to the router for a strong signal. You can add the device using one of the following methods:
- Auto Search: Open the Smart Life app. It will automatically search for devices via Bluetooth. Follow the on-screen prompts to add.
- Manual Add: Tap the "+" symbol in the upper right corner of the app, then select [Industry and Agriculture] > [Water Valve Controller (Wi-Fi)]. Follow the prompts to complete the operation.
- QR Scan: Tap the "+" and scan the QR code provided in the physical manual to add the device quickly.
- Connection Confirmation: Once the network distribution is successful, the red indicator light will stop flashing and turn off.


3. Operating Instructions
3.1 Manual Control
The device features four control buttons (A, B, C, D) on the key operation area for manual control of each valve.
- Button A: Manual opening key for valve A.
- Button B: Manual opening key for valve B.
- Button C: Manual opening key for valve C.
- Button D: Manual opening key for valve D.
- Indicator Light: A green light flashing indicates that the button execution (opening or closing the valve) is effective.
3.2 Automatic Watering and Scheduling
The Smart Life app allows you to set up detailed watering plans for each of the four independent zones.
- Independent Programs: Each of the 4 valves (A, B, C, D) can be programmed with specific start times, durations (1 minute to 24 hours), and frequencies (daily, weekly, specific days) without interfering with other zones.
- Circular Irrigation: The device supports circular irrigation mode for short-interval watering, suitable for misting and cooling applications.
- Real-time Monitoring: Monitor real-time data, work records, and other information through the mobile app.



3.3 Rain Delay Function
The integrated rain sensor automatically detects precipitation and pauses your preset watering schedules to prevent over-watering and conserve water. This function needs to be enabled in the app.
- Activation: Turn on the "Rain Sensing" toggle in the Smart Life app.
- Automatic Pause: Once enabled, the timer will automatically pause the watering plan when the sensor detects rain. The delayed watering function allows you to set a delay for one watering interval without interrupting the timer program settings, and then automatically restores your original watering settings.


3.4 Child Lock Safety
The child lock function, accessible via the app, prevents accidental tampering or schedule changes, ensuring your watering plans remain undisturbed.
3.5 Application Examples

4. Maintenance
- Filter Cleaning: Regularly clean the stainless steel filter screen inside the movable joint to prevent blockage from sediment and impurities in the water source.
- Winter Storage: The device is not antifreeze. To prevent freezing damage, remove the timer from the faucet and store it indoors when temperatures drop below 1°C (33.8°F).
- Environmental Protection: Protect the host from excessive rain and direct sun exposure when not in use, although it is designed for outdoor conditions.
5. Troubleshooting
- Connection Failure: If the device fails to connect to the network, try pressing and holding the WiFi button multiple times for 5 seconds until the red light flashes, then reconfigure the distribution network in the app. Ensure your phone is connected to a 2.4GHz WiFi network and Bluetooth is on.
- Device Malfunction: In case of a product malfunction, briefly press the reset button on the device.
- Insufficient Power: If the device is used indoors or in low light conditions, plug in a Type-C USB charging cable to ensure sufficient power. A slow flashing red light indicates charging; a solid red light (or no light) means it's fully charged.
- No Water Flow/Low Pressure: Ensure the water pressure is within the specified range of 0.5 bar - 8 bar (7.25 psi - 116 psi). If using a water tank or well, external pressurization may be required. Check the water inlet filter for blockages.
- Temperature Issues: This product does not operate under low temperature conditions (below 0°C) and may cause structural damage. Disassemble and store indoors if the temperature is below 0°C.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | YG-344 |
| Product Type | Smart Watering Timer, Garden Water Timers |
| Material | Plastic |
| Origin | Mainland China |
| Timer Type | Ac Pro |
| Zones Supported | 4-Zone Independent Control |
| Application | Garden, Lawn, Greenhouse, Patio, Pool, Animal Feeding, Travel Auto-Irrigation |
| Power Source | Solar Charging, Type-C USB |
| Waterproof Rating | IPX6 |
| Feature Highlights | Timed Irrigation, Rain Delay, Lock Screen, Large Screen, Easy to Install |
| Working Voltage | DC 5V |
| Wireless Protocol | 2.4GHz WiFi |
| Water Inlet Thread | 1/2" or 3/4" (with adapter) |
| Water Outlet Thread | 3/4" Standard G/NH Thread |
| Rain Sensing | Automatic Pause Function |
| Watering Zones | 4 Independent Outlets |
| Working Water Pressure | 0.5 bar - 8 bar (7.25 psi - 116 psi) |
| Max Water Flow | 35 L/min |
| Irrigation Duration | 1 minute to 24 hours |
| Watering Frequency | Daily, Weekly, Specific Days |
| Safety Feature | Child Lock Function |
| Working Temperature | 1°C - 50°C (33.8°F - 122°F) |
| App Support | Smart Life / Tuya Smart |
6.1 Dimensions

7. Warranty and Support
7.1 Warranty Terms
A one-year free warranty and repair service are provided for products sold. Within one year from the purchase date, any damage caused by poor material or design defects will be repaired free of charge. After one year, maintenance and replacement services will incur a cost.
The following product defects are not covered under free maintenance:
- Water ingress or dampness caused by incorrect installation.
- Voltage mismatch causing the host to burn out.
- Repair or modification not authorized by our company.
- Other force majeure factors.
7.2 Additional Resources
For a detailed user manual in PDF format, please refer to the official document: User Manual (PDF)
8. User Tips
- Seasonal Adjustments: Due to varying water requirements of plants in different seasons, it is advisable to reset your irrigation program each season to best suit your plants' needs.
- Offline Operation: Once a watering schedule is successfully set in the app, the timer will continue to execute the preset plan even if the WiFi connection is lost.
- Device Sharing: You can share control of the timer with family members by using the "Share Device" function within the Smart Life or Tuya app.