1. Introduction
Thank you for choosing the Intelamp Outdoor Solar Security Flood Light. This manual provides essential information for the safe and efficient use of your new solar light. Please read all instructions carefully before installation and operation.
This solar flood light features a large solar panel, high-capacity battery, dual motion sensors, and three adjustable lamp heads for wide-angle illumination, making it ideal for gardens, yards, paths, and garages.
2. Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.
3. Product Overview

The Intelamp Solar Security Flood Light is designed for outdoor use, featuring a robust build and advanced solar technology. Key components include:
- Solar Panel: Converts sunlight into electrical energy to charge the internal battery.
- LED Lamp Heads: Three adjustable heads provide wide-angle illumination.
- Motion Sensors: Two integrated sensors detect movement for enhanced security.
- Battery: High-capacity lithium battery for extended lighting duration.


4. Setup and Installation
The solar flood light is designed for easy, self-contained installation. No manual charging is required before first use.
4.1. Preparation
- Remove all protective films from the solar light casing and solar panel.
- Ensure the solar panel is unobstructed and free of stains.
4.2. Mounting Location
Install or place the light fixture in a well-lit, unobstructed location to ensure maximum sunlight exposure. The recommended installation height is 1.8-2.5 meters.
Each package is equipped with screws and tie straps for installation. The solar sensor lights can be screwed to hard surfaces such as walls, wooden fences, and garage door frames, or bound to trees or posts with the provided tie straps.
4.3. Initial Charging
Place the light fixture in direct sunlight. The solar panel will automatically absorb sunlight and store electrical energy. 6-8 hours of sufficient sunlight can provide 8-12 hours of nighttime lighting (actual duration depends on weather and sunlight intensity).
5. Operation
5.1. Power On/Off
Locate the power switch on the side/bottom of the light fixture and switch it to the "ON" position to turn it on. Some models support a light-controlled mode; switch it to the "Auto" position, and the light fixture will automatically turn on after dark and automatically turn off at dawn.
5.2. Lighting Modes
A short press of the mode button cycles through the following lighting modes:
- Mode 1 (Dim-to-Bright Sensor Mode): Lights are set on low brightness at all times and will illuminate brightly (100%) when motion is detected. After 30 seconds of no motion, they return to low brightness.
- Mode 2 (Off-to-Bright Sensor Mode): Lights are off and will illuminate brightly (100%) when motion is detected. After 30 seconds of no motion, they turn off.
- Mode 3 (Constant Light Mode): Lights will be on low light throughout the night, and the motion sensor is inactivated.



5.3. Motion Sensor Functionality
The innovative dual sensor design detects motion through a much wider range than single sensor models, providing a full 180 degrees of security coverage. This enhanced security feature reduces blind spots and offers more light protection throughout the night. The maximum detection range is 8 meters.

5.4. Product Demonstration Video
6. Maintenance
- Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, and debris. A clean solar panel ensures optimal charging efficiency.
- Inspection: Periodically check the light fixture for any physical damage or loose connections.
- Battery Care: Ensure the solar light receives adequate sunlight daily to maintain battery health and longevity.
7. Troubleshooting
- Light does not turn on at night:
- Ensure the power switch is in the "ON" or "Auto" position.
- Verify the solar panel is clean and receiving direct sunlight for at least 6-8 hours during the day.
- Check if the installation location is too close to other light sources, which might prevent the light from activating.
- Light duration is shorter than expected:
- Insufficient sunlight exposure during the day. Relocate the light to a sunnier spot.
- Heavy cloud cover or adverse weather conditions can reduce charging efficiency.
- Ensure the solar panel is clean and free from obstructions.
- Motion sensor is not working:
- Ensure the light is in a motion-sensing mode (Mode 1 or Mode 2).
- Check for obstructions blocking the sensor's field of view.
- Verify the installation height is within the recommended range (1.8-2.5 meters).
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Intelamp |
| Model Number | YL002-12A1PK |
| Power Source | SOLAR |
| Voltage | 5V |
| Light Source | LED bulbs |
| Is Dimmable | Yes |
| Solar Cell Type | Lithium battery |
| Protection Level | IP65 (Snow, Heat, Wind resistance) |
| Body Material | ABS |
| Installation Method | Self-contained |
| Solar Panel Size | 40 sq inch (approx. 9.4 x 4.3 inches) |
| Battery Capacity | 6000 mAh |
| Brightness | 1200 Lumens |
| Lighting Angle | 270° Wide-angle |
| Motion Sensor Detection | 180° detection angle, Max 8M range |
| Certifications | CE, FCC, GS, LVD, ROHS, UL |


9. User Tips
- Optimal Placement: For best performance, ensure the solar panel is positioned to receive maximum direct sunlight throughout the day, especially during winter months when sunlight is weaker.
- Adjustable Heads: Utilize the adjustable lamp heads and solar panel to direct light and maximize solar charging efficiency for your specific area.
- Mode Selection: Choose the appropriate lighting mode based on your security and energy-saving needs. Sensor modes are ideal for security and conserving battery life, while constant light mode provides continuous illumination.
10. Warranty and Support
This product comes with a 1-year warranty from the date of purchase. For warranty claims or technical support, please contact Intelamp customer service at service@intelamp.com.
For a detailed item guide and documents, you may refer to the official user manual PDF available at: Intelamp Solar Light User Manual (PDF).