intelamp YL002-12A1PK

Contents

Intelamp Solar Security Light User Manual

Model: YL002-12A1PK

Brand: intelamp

1. Introduction

Thank you for choosing the Intelamp Solar Security Light. This product is designed to provide efficient and reliable outdoor lighting with motion sensing capabilities, powered by solar energy. Please read this manual carefully before installation and use to ensure optimal performance and safety.

Video: Overview of the Intelamp Solar Security Light features and comparison with similar products.

2. Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • WARNING: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.

3. Product Features

  • Wide Arc Lighting Area: Adjustable 3 lamp heads provide an industry-leading 270° wide-angle illumination.
  • High-Efficiency Solar Panels: Features a 40 square inch solar panel for efficient charging.
  • High-Capacity Batteries: Equipped with a 6000mAh Lithium battery, offering 3 times higher capacity than many similar products, ensuring longer lighting duration.
  • Unique Dual Sensor Design: Two motion sensors provide a full 180° security coverage, reducing blind spots.
  • Durable and Waterproof: IP65 protection level ensures resistance to outdoor elements.
  • Adjustable Design: Middle lamp head adjusts vertically (up/down 45°), side lamp heads adjust horizontally (left/right 90°). The solar panel can be adjusted vertically (up/down 60°).
  • Multiple Lighting Modes: Offers 3 distinct lighting modes for various needs.
Comparison of solar panel size, battery capacity, and brightness between Intelamp and a standard solar light.

Image: Comparison highlighting the larger solar panel (40 sq inch vs 15 sq inch), higher battery capacity (6000 mAh vs 2000 mAh), and greater brightness (1200 lumen vs 600 lumen) of the Intelamp light.

Comparison of detection angle between two sensors (180 degrees) and one sensor (90 degrees).

Image: Illustration showing the wider 180° detection angle provided by two motion sensors compared to a single 90° sensor.

IP65 Waterproof, 1200LM High bright, 270 degree wide-angle lighting in rainy conditions.

Image: Demonstrates the IP65 waterproof rating, 1200LM high brightness, and 270° wide-angle lighting in a simulated rainy environment.

Diagram showing adjustable lamp heads and solar panel angles.

Image: Visual representation of the adjustable lamp heads (90° horizontal) and solar panel (60° vertical) for flexible lighting direction.

High Capacity Lithium Battery 6000mAh, 3 times higher capacity.

Image: Close-up of the 6000mAh Lithium battery, emphasizing its high capacity.

4. Specifications

AttributeValue
Model NumberYL002-12A1PK
Brand Nameintelamp
Power SourceSOLAR
Light SourceLED bulbs
Voltage5V
Is Bulbs IncludedYes
Is Batteries IncludedYes
Solar Cell TypeLithium battery
Is DimmableYes
Protection LevelIP65
Body MaterialABS
Installation MethodSelf-contained
UseIndustrial
OriginMainland China
CertificationsCE, FCC, GS, LVD, ROHS, UL
Package Dimensions25cm (L) x 11cm (W) x 13cm (H)
Package Weight0.87 kg
Product dimensions: 9.4 inches wide for solar panel, 12 inches wide for light unit, 4.3 inches deep for solar panel.

Image: Detailed dimensions of the solar panel and light unit.

5. Setup and Installation

The Intelamp Solar Security Light is designed for easy installation. Each package includes screws and tie straps for versatile mounting options.

5.1. Preparation

  1. Remove all protective films from the solar light casing and solar panel. Ensure the solar panel is unobstructed and free of stains.
  2. Choose a well-lit, unobstructed location for installation. The recommended installation height is between 1.8 and 2.5 meters (approximately 6 to 8 feet) to maximize sunlight exposure and motion detection range.

5.2. Mounting Options

  • Screw Fixation: For hard surfaces like walls, wooden fences, and garage door frames, use the provided screws to securely mount the light.
  • Cable Tie Fixation: For trees or posts, use the provided tie straps to bind the light securely.

Important: Ensure the solar panel is installed in a location where it receives direct sunlight without any shade throughout the day to ensure adequate charging.

Installation of solar light using screw fixation on a wall.

Image: Demonstrates screw fixation for mounting the solar light on a wall.

Solar light mounted on a tree with cable ties, showing 4 hours charging for 24 hours lighting.

Image: Illustrates mounting the solar light on a tree using cable ties, highlighting charging and lighting duration.

6. Operation

6.1. Initial Charging

No manual charging is required. Once installed, place the light fixture in direct sunlight. The solar panel will automatically absorb sunlight and store electrical energy. 6-8 hours of sufficient sunlight can provide 8-12 hours of nighttime lighting (actual duration depends on weather and sunlight intensity).

6.2. Power On

Locate the power switch on the side/bottom of the light fixture and switch it to the "ON" position to turn it on. Some models support a light-controlled mode; switch it to the "Auto" position, and the light fixture will automatically turn on after dark and automatically turn off at dawn.

6.3. Lighting Modes

When you receive the solar motion sensor lights, please pay attention:

First: Press the "POWER" button to turn on the light, cover the solar panel (to simulate darkness) and press the "MODE" button to set the desired lighting mode. There are 3 modes:

  1. Mode 1 (Sensor Mode with Dim Light): The light maintains a low brightness setting at all times. When motion is detected, it illuminates brightly. After 30 seconds of no motion, it returns to low brightness.
  2. Mode 2 (Sensor Mode - Off until Motion): The light remains off. When motion is detected, it illuminates brightly. After 30 seconds of no motion, the light turns off completely.
  3. Mode 3 (Constant Low Light Mode): The light stays on at a constant low brightness throughout the night, and the motion sensor is inactive.
Sensor Mode: High brightness on motion, then low brightness or off. ON Mode: Keep lighting all the time.

Image: Visual explanation of Sensor Mode (high brightness on motion, then low brightness/off) and ON Mode (constant lighting).

7. Maintenance

  • Cleaning the Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
  • Battery Care: The built-in Lithium battery is designed for long life (over 5 years). Avoid extreme temperatures to prolong battery lifespan.
  • General Cleaning: Periodically clean the light fixture with a soft cloth to maintain its appearance and ensure clear light output.
  • Winter Care: In areas with heavy snow, ensure the solar panel is clear of snow to allow for charging.

8. Troubleshooting

  • Light not turning on at night:
      - Ensure the power switch is in the "ON" or "Auto" position.
      - Verify the solar panel is receiving direct sunlight for at least 6-8 hours during the day.
      - Check if the solar panel is clean and free from obstructions.
      - If in sensor mode, ensure there is motion within the detection range.
  • Light not bright enough or short lighting duration:
      - The solar panel may not be receiving enough direct sunlight. Relocate the light if possible.
      - The battery might not be fully charged due to cloudy weather or insufficient charging time.
      - Ensure the solar panel is clean.
  • Motion sensor not detecting:
      - Check if the light is in a motion-sensing mode (Mode 1 or Mode 2).
      - Ensure the sensor is not obstructed.
      - Verify the installation height is within the recommended 1.8-2.5 meters.

9. User Tips

  • Optimal Placement: For best performance, install the light where the solar panel can receive at least 6-8 hours of direct, unobstructed sunlight daily.
  • Adjusting for Coverage: Utilize the adjustable lamp heads and solar panel to direct light and maximize solar charging efficiency for your specific area.
  • Testing Modes: When first setting up, cover the solar panel to simulate darkness and cycle through the modes to find the one that best suits your needs.
  • Regular Cleaning: A quick wipe of the solar panel every few weeks can significantly improve charging efficiency, especially in dusty or pollen-heavy environments.

10. Warranty and Support

This Intelamp product comes with a 1-year warranty from the date of purchase. Intelamp is committed to providing high-quality products and customer satisfaction. The product is designed for a service life of two years or more.

For any questions, issues, or support needs, please contact our customer service team:

  • Manufacturer: Shenzhen Jindian Electronic Technology Co., Ltd
  • Email: service@intelamp.com
  • EU Authorized Representative: SUCCESS COURIER SL
  • EU Representative Email: successservice2@hotmail.com

This product complies with all applicable safety and regulatory requirements in the market where it is sold, including CE, FCC, GS, LVD, ROHS, and UL certifications.

© 2024 Intelamp. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.