1. Introduction
Thank you for choosing the Kensen FK-706 Mini Electric Shaver. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new shaver. Please read it thoroughly before first use and keep it for future reference.
2. Product Overview
2.1. Package Contents
- Mini Electric Shaver (FK-706) x 1
- Type-C Charging Cable x 1
- Cleaning Brush x 1
- User Manual x 1
- Wiping Cloth x 1
2.2. Key Features
- 4D Floating Blade Head: Precision stainless steel blades and a 4-layer floating blade head design adapt perfectly to facial contours for a comfortable and smooth shave.
- Powerful Motor: Equipped with an 8000 RPM motor for efficient cutting of thicker stubble without pulling.
- Ultra-Long Battery Life: Built-in 900mAh battery provides approximately 120 minutes of usage on a 90-minute charge via USB-C.
- 100% Waterproof (IPX6): Suitable for both wet and dry shaving with foam. Easy to clean by rinsing under tap water.
- Professional Travel Care Device: Features a magnetic dust cover for blade protection and integrated travel lock technology for secure portability.
2.3. Product Visuals
3. Specifications
| Attribute | Value |
|---|---|
| Product Name | Mini Electric Shaver |
| Model | FK-706 |
| Rated Voltage | 3.2V |
| Input Parameters | 5V/1A |
| Input Power | 8W |
| Product Size | Approx. 82.5 x 65.6 x 35.65 mm |
| Weight | Approx. 155g |
| Charging Time | Approx. 90 minutes |
| Battery Life | Approx. 120 minutes |
| Battery Capacity | 900mAh |
| Waterproof Rating | IPX6 |
| Blade Material | Stainless steel |
| Washing Mode | Whole body washing |
4. Setup
4.1. Initial Charging
- Before first use, ensure the shaver is fully charged.
- Connect the provided Type-C charging cable to the shaver's charging port and a compatible 5V/1A USB power source.
- The charging indicator will illuminate. A full charge takes approximately 90 minutes.
- Once fully charged, the shaver provides about 120 minutes of cordless use.
5. Operating Instructions
5.1. Power On/Off
Press the power button located on the shaver to turn it on or off.
5.2. Shaving
The Kensen FK-706 is designed for both wet and dry shaving. For best results:
- Dry Shaving: Ensure your face is clean and dry. Gently move the shaver against the direction of hair growth.
- Wet Shaving: Apply shaving foam or gel to your face. Move the shaver in circular motions or against the grain for a close shave.
5.3. Travel Lock
To prevent accidental activation during travel, the shaver features a travel lock function.
- Activate/Deactivate: Press and hold the power button for a few seconds until the travel lock indicator appears/disappears.
5.4. Product Demonstration Video
6. Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the life of your shaver.
6.1. Cleaning the Shaver Head
- Turn off the shaver.
- The magnetic blade head can be easily detached for cleaning. Gently pull the blade head away from the shaver body.
- Rinse the blade head under running tap water to remove hair clippings and debris.
- Use the provided cleaning brush to remove any stubborn hair particles from the blades and foil.
- Do not immerse the entire shaver body in water for extended periods.
- After cleaning, shake off excess water and allow the blade head to air dry completely before reattaching it to the shaver body.
6.2. General Care
- Always keep the Type-C charging port dry. Avoid unplugging or plugging in the charging cable with wet hands.
- Do not use salt water, hot water above 60°C, thinner, petrol, alcohol, or other chemicals to clean the shaver.
- When traveling, ensure the shaver is well-stored to protect the blade mesh.
- Store and charge the shaver at temperatures between 5°C and 35°C.
- Do not touch the blade part (metal part) of the head assembly directly with your hands to prevent injury.
7. Troubleshooting
7.1. Common Issues and Solutions
- Q: The product is not working properly. What should I do?
- A: There are two possibilities:
(1) The blade of the head may be stuck with hair. Please clean the inside and outside of the head with the cleaning brush and try again.
(2) The battery is low or exhausted. Please fully charge the shaver and try again. - Q: I heard an unusual noise during use. What should I do?
- A: If you notice any unusual noise, immediately turn off the power and check if the blade is deformed or damaged. If damage is present, discontinue use and contact support.
- Q: Can the shaver blade be washed with water? Will it rust after washing with water?
- A: Yes, you can wash it with water as the body is IPX6 waterproof. After washing, please wipe it dry with a cloth or tissue. It is designed not to rust.
8. User Tips
- For a closer shave, stretch your skin taut with your free hand while shaving.
- Shave regularly to prevent hair from becoming too long, which can make shaving more difficult and potentially cause pulling.
- Utilize the travel lock feature when storing the shaver in a bag to avoid accidental power-on and battery drain.
- Always ensure the shaver is completely dry before charging to prevent electrical hazards.
9. Safety Notices
- Keep the Type-C charging port dry. Do not unplug or plug in the Type-C charging cable with wet hands to prevent electric shock.
- Ensure that the rated voltage indicated on the electric shaver matches the output voltage of the charging device used.
- If the electric shaver is damaged, do not use it again. Refer it to a maintenance department for repair if necessary.
- Individuals (including children) with physical or mental challenges or lacking relevant experience and knowledge must use this product under the supervision and guidance of a guardian.
- When unplugging the charging cable, do not pull the Type-C power cord directly.
- This product can only be charged with the matching Type-C power cord. Do not use any accessories not provided by us with this product.
- Please check whether the blade net is damaged or deformed before use to avoid skin injury.
- Clean the electric shaver with water, but do not immerse it in water for a long time.
- Do not use salt water, hot water above 60°C, thinner, petrol, alcohol, or other chemicals to clean the electric shaver.
- When traveling, ensure the shaver is well-stored to protect the electric shaver blade mesh.
- During use and charging, the electric shaver may become slightly warm, which is normal.
- Do not charge the electric shaver for an excessively long time.
- It is recommended to charge, use, and store the electric shaver at a temperature between 5°C and 35°C.
- Do not touch the blade part (metal part) of the head assembly directly with your hands, as this may result in injury.
10. Warranty and Support
Kensen is committed to providing high-quality products and excellent customer service.
- 365-Day Guarantee: Your product is covered by a 365-day guarantee from the date of purchase.
- Lifetime Technical Support: We offer lifetime technical support for your Kensen FK-706 Electric Shaver.
- For any inquiries or support needs, please contact our customer service.
