Havit KB903L

Contents

Havit KB903L 60% Mechanical Gaming Keyboard

User Manual

Model: KB903L | Brand: Havit

Introduction

Thank you for choosing the Havit KB903L 60% Mechanical Gaming Keyboard. This compact and high-performance keyboard is designed for gamers and users who appreciate a minimalist design without compromising functionality. Featuring 61 keys, durable Red mechanical switches, and dynamic RGB backlighting, the KB903L offers a superior typing and gaming experience. This manual will guide you through the setup, operation, and maintenance of your new keyboard.

Package Contents

Please check the box for the following items:

  • 1 x Havit KB903L Mechanical Keyboard
  • 1 x USB-C to USB Cable (detachable)
  • 1 x User Manual
  • 1 x Keycap Puller
Havit KB903L keyboard packaging box
Packaging box for the Havit KB903L keyboard, showing product features and branding.

Product Overview

The Havit KB903L is a 60% form factor keyboard, meaning it's significantly more compact than a full-sized keyboard, making it ideal for saving desk space and portability. It features 61 keys with Red mechanical switches, known for their linear feel and low actuation force, preferred by many gamers for fast, responsive keystrokes. The keyboard also boasts vibrant RGB backlighting with multiple customizable modes.

Front view of the Havit KB903L keyboard
Front view of the Havit KB903L keyboard, showcasing its compact 60% layout and RGB lighting.
Angled view of the Havit KB903L keyboard
Angled view of the Havit KB903L keyboard, highlighting the keycaps and compact layout.

Setup Instructions

Setting up your Havit KB903L keyboard is straightforward:

  1. Unpack the keyboard and the detachable USB-C to USB cable from the box.
  2. Connect the USB-C end of the cable to the port on the keyboard.
  3. Insert the standard USB-A end of the cable into an available USB port on your computer. For optimal performance and stability, it is recommended to use a USB port located on the back of your PC rather than a front-panel port.
  4. Wait approximately 1 minute for your computer to automatically detect and install the necessary drivers. No additional software or drivers are required for basic functionality.
  5. Ensure your operating system's keyboard language setting is configured to QWERTY-US-American English to ensure correct key input synchronization.
Top-down view of the Havit KB903L keyboard with its detachable USB-C cable
Top-down view of the Havit KB903L keyboard with its detachable USB-C cable, ready for connection.

Operating Instructions

Operating System Mode Switching

The KB903L keyboard supports both Windows and Mac operating systems. To switch between modes:

  • For Windows OS: Press FN + A
  • For Mac OS: Press FN + S

Function Keys

The keyboard features 12 programmed functions accessible via the FN key to facilitate day-to-day use:

  • My Computer
  • Web Browser
  • Email
  • Calculator
  • Stop (media)
  • Previous Track
  • Play/Pause (media)
  • Next Track
  • Lighting Control
  • Volume Up
  • Volume Down
  • Mute

Refer to the keycaps for specific FN key combinations for these functions.

Key Locks

The keyboard includes lock functions for certain keys to prevent accidental presses during gaming or intensive tasks. These typically include the Windows (WIN) key and the Function (FN) key. Consult the keyboard's keycap legends for specific lock/unlock combinations.

RGB Lighting Modes

The Havit KB903L offers extensive RGB backlighting customization:

  • 20 Pre-programmed LED Lighting Modes: Cycle through various dynamic and static lighting effects.
  • 6 Levels of Light Intensity: Adjust the brightness to your preference.
  • 8 Color Options: Choose from a spectrum of colors, including full RGB.
  • 5 Adjustable Speed Levels: Control the speed of dynamic lighting effects.

Specific key combinations (usually involving the FN key) are used to cycle through modes, adjust brightness, change colors, and modify speed. Refer to the keyboard's keycap legends for these controls.

Side profile view of the Havit KB903L keyboard, highlighting the keycap height and RGB lighting effects.
Side profile view of the Havit KB903L keyboard, highlighting the keycap height and RGB lighting effects.

Maintenance

To ensure the longevity and optimal performance of your keyboard, follow these maintenance tips:

  • Cleaning: Regularly clean your keyboard to remove dust, crumbs, and debris. Use a soft brush or compressed air to clear particles from between the keycaps. For surface cleaning, a slightly damp, lint-free cloth can be used.
  • Keycap Removal: Use the included keycap puller for easy and safe removal of keycaps for deeper cleaning or switch maintenance. To remove a keycap, gently place the puller over the keycap and apply a slight upward force. To reattach, align the keycap with the switch stem and press down gently until it clicks into place.
  • Avoid Spills: Keep liquids away from the keyboard to prevent damage to the internal components. In case of a spill, immediately disconnect the keyboard from your computer and allow it to dry completely before reconnecting.
  • Cable Care: The detachable USB-C cable is gold-plated for better conductivity and durability. Avoid sharp bends or excessive pulling on the cable to prevent damage.
Close-up angled view of the Havit KB903L keyboard, focusing on the keycaps and switch type.
Close-up view of the Havit KB903L keycaps and mechanical switches, illustrating the design for easy maintenance.

Troubleshooting

  • Keyboard not responding:
    • Ensure the USB cable is securely connected to both the keyboard and your computer.
    • Try connecting the keyboard to a different USB port on your computer.
    • Test the keyboard on another computer to rule out a system-specific issue.
  • Incorrect key input (e.g., 'Z' types 'Y'):
    • Verify that your operating system's keyboard language setting is set to QWERTY-US-American English.
  • RGB lighting not working or behaving unexpectedly:
    • Check the lighting control key combinations (usually involving FN) to ensure the lighting is not turned off or set to a very low brightness.
    • Ensure the keyboard is receiving sufficient power from the USB port.
  • Specific keys not working:
    • Carefully remove the keycap using the keycap puller and inspect the mechanical switch for any visible damage or obstruction.
    • Clean any debris around the switch.

Specifications

Feature Detail
Model KB903L
Interface USB
Dimensions (L x W x H) 291 x 101 x 39 mm
Keyboard Type Mechanical
Switch Type Red Mechanical Switch
Number of Keys 61
Language QWERTY-US-American English
Operating Voltage 5V
Operating Current 200mA
Backlighting RGB (20 modes, 6 intensity levels, 8 color options, 5 speed levels)
Key Life 50,000,000 clicks
Cable Length 1.8 m (detachable USB-C, gold-plated)
Compatibility Windows 2000/Vista/Win7/Win8/Win10/Mac/Linux
Package Size (H x W x L) 15 cm x 5 cm x 34 cm
Package Weight 760 g

User Tips

  • OS Language Setting: Always ensure your operating system's keyboard language setting matches the QWERTY-US-American English layout for accurate key input, especially after initial setup or switching computers.
  • Optimal Connection: For the most stable connection and performance, connect your keyboard to a USB port directly on your computer's motherboard (typically found at the back of a desktop PC).
  • Keycap Maintenance: Utilize the provided keycap puller for easy and safe removal of keycaps, which facilitates thorough cleaning and allows for switch inspection or replacement if needed.
  • Explore Lighting Modes: Take time to experiment with the various RGB lighting modes, brightness levels, colors, and speeds to find the perfect aesthetic for your setup and mood.

Warranty and Support

For any technical support, warranty claims, or further inquiries regarding your Havit KB903L keyboard, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for warranty services.

© 2024 Havit. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.