Tilta Camera Cage Kit for Sony FX2 Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Tilta Camera Cage Kit for the Sony FX2 camera. This kit is designed to enhance the functionality and protection of your camera, offering multiple mounting points and configuration options for various shooting scenarios.

2. Package Contents

The Tilta Camera Cage Kit includes the following components:

Full Camera Cage for Sony FX2
Xeno Top Handle
HDMI Cable Clamp
Arca Baseplate (Detachable)
XLR Handle Extension Bracket (Optional, depending on kit variant)
V-mount Battery Plate (Optional, depending on kit variant)
EF-E Adapter Ring Support (Optional, depending on kit variant)
Mounting Screws and Tools

Tilta Camera Cage Kit TA-T88-FCC-B components and installation diagram — Figure 2.1: Components of the Tilta Camera Cage Kit (Black, TA-T88-FCC-B) with basic installation overview.

Tilta Camera Cage Kit TA-T88-FCC-TG components and installation diagram — Figure 2.2: Components of the Tilta Camera Cage Kit (Titanium Gray, TA-T88-FCC-TG) with basic installation overview.

3. Setup and Assembly

3.1. Attaching the Camera Cage

Ensure your Sony FX2 camera is powered off and any accessories are removed.
Carefully align the camera with the Tilta Full Camera Cage. The cage is designed for a precise fit around the camera body.
Secure the camera to the cage using the provided mounting screws, typically located at the bottom and side of the cage. Refer to the installation diagrams (Figures 2.1 and 2.2) for screw locations.
Tighten all screws firmly but do not overtighten to avoid damaging the camera or cage.

Sony FX2 camera with Tilta cage mounted on a tripod — Figure 3.1: Sony FX2 camera securely mounted within the Tilta cage, ready for tripod use.

3.2. Installing the Detachable Arca Bottom Plate

The modular Arca bottom plate allows for quick transitions between different support systems.

Align the Arca bottom plate with the base of the camera cage.
Slide the plate into position. The design supports bidirectional installation for flexibility.
Secure the plate using the integrated locking mechanism or screws.

Detachable Arca Bottom Plate with bidirectional installation — Figure 3.2: Bidirectional installation of the detachable Arca bottom plate, featuring 1/4"-20 and 3/8"-16 threads with locating points.

3.3. Attaching the Xeno Top Handle

The Xeno Top Handle provides an ergonomic grip and additional mounting points.

Attach the Xeno Top Handle to the top of the camera cage using the designated screw points.
Ensure it is securely fastened for safe handling.

Tilta Xeno Top Handle and XLR Handle with Extension Bracket — Figure 3.3: Close-up view of the Tilta Xeno Top Handle (left) and an optional XLR Handle with Extension Bracket (right).

3.4. Installing the HDMI Cable Clamp

The HDMI Cable Clamp protects your HDMI port and prevents accidental disconnections.

Position the HDMI Cable Clamp near the HDMI port on the camera cage.
Insert your HDMI cable into the port and then secure it within the clamp.
Tighten the clamp screw to hold the cable firmly in place, ensuring port protection and anti-rotation.

HDMI Cable Clamp providing port protection and secure connection — Figure 3.4: The HDMI Cable Clamp in action, ensuring a secure and protected connection for the HDMI cable.

3.5. Optional Accessories Installation

Depending on your kit, you may have additional accessories:

XLR Handle Extension Bracket: Mounts to the cage to provide an extended handle for improved comfort and additional mounting options.
V-mount Battery Plate: Attaches to the cage to allow for V-mount battery power solutions.
EF-E Adapter Ring Support: Provides support for lens adapters, reducing strain on the camera's lens mount.

Optional accessories: XLR Handle Extension Bracket, V-mount Battery Plate, EF-E Adapter Ring Support, and Tilta Batteries — Figure 3.5: Various optional accessories including the XLR Handle Extension Bracket, V-mount Battery Plate, and EF-E Adapter Ring Support.

4. Operating the Camera Cage Kit

4.1. Multiple Configurations

The Tilta Camera Cage Kit supports various shooting configurations:

DJI RS Gimbal Mode: Mount your caged camera onto a DJI RS series gimbal for stabilized shots.
Tripod Mode: Utilize the Arca baseplate for quick attachment to tripods and other support systems.
Handheld Mode: Use the Xeno Top Handle or optional XLR Handle for comfortable and stable handheld shooting.

Camera in DJI RS Gimbal Mode, Tripod Mode, and Handheld Mode — Figure 4.1: Demonstrating the versatility of the cage kit in DJI RS Gimbal Mode, Tripod Mode, and Handheld Mode.

4.2. Horizontal and Vertical Switching

The cage design allows for easy switching between horizontal and vertical shooting orientations, utilizing side 1/4" and 3/8" threads for secure vertical mounting.

Horizontal and Vertical Switch feature with side mounting threads — Figure 4.2: Illustration of the horizontal and vertical switching capability, highlighting the side 1/4" and 3/8" threads for vertical shooting.

4.3. Unobstructed EVF Access

The cage is designed to ensure full and unobstructed access to the camera's Electronic Viewfinder (EVF), maintaining ergonomic use.

Unobstructed EVF Access with the camera cage — Figure 4.3: Demonstrating clear and unobstructed access to the camera's EVF while the cage is installed.

5. Maintenance

Cleaning: Use a soft, dry cloth to wipe down the cage and its components. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive materials.
Inspection: Regularly check all screws and connections to ensure they are tight. Loose components can lead to instability or damage.
Storage: Store the camera cage kit in a clean, dry environment, away from extreme temperatures and humidity, when not in use.

6. Troubleshooting

Cage not fitting correctly: Double-check that you have the correct cage model for your Sony FX2 camera. Ensure no obstructions are preventing proper alignment.
Loose components: Re-tighten all screws. If screws repeatedly come loose, consider using a small amount of non-permanent thread locker (e.g., Loctite Blue 242) on the threads, but exercise caution and follow product instructions.
Accessories not mounting: Verify that you are using the correct mounting points (e.g., 1/4"-20 or 3/8"-16 threads) for your accessories.

7. Specifications

Feature	Detail
Model Numbers	TA-T88-FCC-B (Black), TA-T88-FCC-TG (Titanium Gray)
Compatibility	Sony FX2 Cinema Camera
Materials	Aluminum-alloy, Stainless Steel
Weight (Package)	Approx. 1.0 kg (2.2 lbs)
Dimensions (Package)	Approx. 11 x 11 x 11 inches (L x W x H)
Mounting Points	1/4"-20 threads, 3/8"-16 threads with locating points, Cold Shoe mounts
Key Features	Handheld-friendly, Lightweight Design, Modular ARCA Bottom Plate, Multiple Configurations (Gimbal, Tripod, Handheld), Horizontal & Vertical Switching, Unobstructed EVF Access, HDMI Cable Clamp for port protection.

Tilta Full Camera Cage for Sony FX2 and Tilta Full Camera Cage for Sony FX2 Pro Kit — Figure 7.1: Overview of the Tilta Full Camera Cage for Sony FX2 and its Pro Kit variant.

8. User Tips

Always ensure all screws are tightened before use to prevent accidental camera drops or accessory detachment.
When using heavy lenses or accessories, utilize the EF-E Adapter Ring Support (if applicable) to distribute weight and reduce strain on the camera's lens mount.
Experiment with different handle positions and configurations to find the most comfortable and balanced setup for your shooting style.
Utilize the numerous mounting points on the cage for attaching monitors, microphones, lights, and other essential filmmaking tools.

9. Warranty and Support

This Tilta product is covered by a manufacturer's warranty. Please refer to the official Tilta website or your purchase documentation for specific warranty terms and conditions.

For technical support, spare parts, or warranty claims, please contact Tilta customer service or your authorized dealer.

	TILTA Full Camera Cage for Sony FX2 User Guide Detailed user guide for the TILTA Full Camera Cage designed for the Sony FX2 camera, covering overview, specifications, and assembly instructions.
	Tilta Camera Cage for Sony A7C: Assembly and Installation Guide Comprehensive guide to assembling and installing the Tilta camera cage and accessories for the Sony A7C camera. Includes detailed instructions for attaching top handles, side handles, wooden handles, and baseplates.
	Tilta Camera Cage System for Sony a7 IV: Installation and Features Comprehensive guide to the Tilta camera cage system for the Sony a7 IV, detailing installation, features, and accessory compatibility. Includes all components and assembly steps.
	DJI Ronin 4D Flex Camera Cage Installation and Configuration Guide A comprehensive guide to installing and configuring the Tilta Camera Cage for the DJI Ronin 4D Flex, including component overviews and extended setup options.
	Tilta Rig Side Handle and Follow Focus Handle: User Guide and Specifications Comprehensive guide to the Tilta Rig Side Handle and Follow Focus Side Handle, detailing features, instructions, calibration, power outputs, and available adaptors for professional camera setups.
	Tilta Camera Cage for RED KOMODO-X: Overview and Functions Comprehensive guide detailing the Tilta camera cage system for the RED KOMODO-X, including an overview of its components and a detailed breakdown of its functional features and mounting points.

TILTA TA-T88-FCC-B