1. Introduction
Thank you for purchasing our 5.5-inch OLED vertical monitor. Please read this manual carefully before using the unit. Have a great experience!
2. Cautions
- Please avoid heavy impact and dropping the product onto the ground.
- The screen is made of glass. Do not drop the screen towards the ground. Keep away from injury if the screen is broken.
- Keep the product away from heat sources and avoid prolonged exposure to the sun, as this can damage the LCD screen.
- To avoid damaging the product, do not attempt to disassemble or repair the unit yourself, as there are no user-adjustable components inside.
- To maintain the LCD screen and protect the cover, follow these guidelines:
- Refrain from using hard objects to hit the screen.
- Do not force to wipe the screen.
- Do not use chemical solutions to clean the screen.
- Do not spray any detergent on the screen.
- Do not write on the screen directly.
- Do not stick on the screen.
- Simply wipe with a clean soft cloth and ensure no water is on the screen.
3. Key Features
- Display: 5.5-inch AMOLED screen with independent light control for ultimate black performance.
- Color Gamut: DCI-P3 100% color gamut for accurate color presentation.
- Contrast Ratio: 1,000,000:1 ultra-high contrast ratio for realistic and vivid visual experience.
- Control: Full touchscreen for easy setup.
- Orientation: Supports menu vertical and horizontal switching.
- LUT Support: Custom 3D-LUT loaded for previewing film looks.
- Audio: Stereo Earphone output.
- Resolution: 1080x1920 pixels.
- Brightness: 550nits.
- Frame Rate: 60Hz.
- Inputs/Outputs: HDMI 2.0 Input/Output, Type-C 5V power input, SD Card Slot.
- Weight: Ultra-lightweight at 148g.
4. Product Overview
The FEELWORLD PS6 monitor offers a compact and versatile solution for camera monitoring. Its OLED display provides superior image quality with deep blacks and vibrant colors.




5. Setup Guide
5.1. Power Supply
The monitor can be powered in two ways:
- USB-C Power Port: Use the USB-C power port on the right side of the monitor with the accompanied power adapter. Ensure the power supply is 5V/2A or more.
- NP-F Battery Slot: The rear cover of the monitor is equipped with an NP-F battery slot, compatible with NP-F series batteries (e.g., F970, F960, F950, F930, F770, F750, F730, F570, F550, F530).
Remark: Please remove the battery from the monitor if it will not be used for a long time.
Battery Installation and Removal:
- Installation: Insert the battery gently in the indicated direction, then slide it to the left (without releasing). A clicking sound indicates that the battery is securely in place.
- Removal: Press and hold the battery release button while sliding the battery to the right, then remove it.
5.2. Connection Method for Monitor and Camera
Preparing before connecting:
- Ensure both the camera/camcorder and monitor are turned off.
- Check if the HDMI interface and cables are clean and intact.
- Prepare anti-static wristbands or discharge static electricity by touching a metal object first.
- Ensure the workbench is clean and stable.
Connection of HDMI cable:
- Use the accompanied HDMI/Micro HDMI cable to connect the HDMI IN port of the monitor to the HDMI Out port of the camera. (Purchase an extra HDMI cable if the provided one is not long enough).
- Fix the wire to avoid hanging or pulling.
- Turn on the camera first, then turn on the monitor. The camera viewfinder image will be displayed on the monitor screen. If your camera has an HDMI output setting function, please set it to Auto or 16:9.
- When shutting down, first turn off the monitor, wait for it to completely shut down, and then turn off the camera.
Connection Cautions:
- When moving the device, be careful not to trip over the wires, which may cause hot plugging or unplugging.
- Regularly check whether the HDMI interface and HDMI cables are worn or blocked by foreign objects.
- It is recommended to disconnect cables when not in use to protect them and the interfaces.
- You can use an HDMI adapter to protect the HDMI interface on the camera and avoid damage caused by frequent plugging and unplugging.
Physical protection measures:
- Use HDMI cable fixing clips or brackets.
- The wire should have an appropriate margin to avoid being too tight.
- Consider using an L-shaped HDMI connector to reduce pressure on the HDMI interface.
5.3. Installation of Mini Hot Shoe Mount Adapter
- Select the direction in which the adapter is mounted according to the shape of the hot shoe on the camera.
- Align the 1/4 screw of the adapter with the 1/4 screw hole on the device.
- Tighten the adjustment knob of the adapter.
- Fully insert the base of the adapter into the universal hot shoe base in the direction shown in the figure.
- Tighten the rotary table of the adapter to fix it on the camera.
Note: If using a camera with a pop-up built-in flash, please turn off the built-in flash. If the camera has a built-in auto flash function, please turn off this function. Remove this device from the camera before using the flash.
6. Operating Instructions
6.1. Menu Operation Instruction
After the monitor is correctly connected to the power supply, the indicator light will be red. Long press the power button to turn on; the indicator light will turn yellow, and after the HDMI signal is input, the indicator light will turn green.
After startup, short press the power button to toggle the screen touch function on or off.
Touch Screen Menu Operation (Vertical mode):
- Double-click on the screen to open the main menu (shown on the left side of the screen) and click on the corresponding menu to display the secondary menu. You can enter the corresponding function option and click directly to select or set. Click the touch screen to exit the menu.
- When the menu is not displayed, swipe up from the bottom of the screen to open the shortcut menu. Swipe left or right to select the needed function and click on the corresponding menu box to turn on or off the function.
- When the menu is not displayed, on the upper half of the screen (1/2 split screen), you can directly adjust the brightness of the screen backlight; on the lower half of the screen (1/2 split screen), you can directly adjust the volume.
Touch Screen Menu Operation (Horizontal mode):
- Double-click on the screen to open the main menu (shown on the left side of the screen) and click on the corresponding menu to display the secondary menu. You can enter the corresponding function option and click directly to select or set. Click the touch screen to exit the menu.
- When the menu is not displayed, swipe up from the bottom of the screen to open the shortcut menu. Swipe left or right to select the needed function and click on the corresponding menu box to turn on or off the function.
- When the menu is not displayed, on the left side of the screen (1/2 split screen), you can directly adjust the brightness of the screen backlight; on the right side of the screen (1/2 split screen), you can directly adjust the volume.

6.2. Menu Function Instruction
The main menu includes 5 parts: Assist, Marker, Image, User, System.
- Assist:
- Analysis (Off, On): Displays waveform, vector, histogram, and embedded audio.
- Waveform (Off, On): Types: RGB, YUV, Y. Assists with professional video camera calibration by showing overall brightness and lighting evenness.
- Vectorscope (Off, On): Shows image saturation and pixel color distribution.
- Histogram (Y Histogram: Off, On; RGB Histogram: Off, On): Y Histogram checks picture brightness. RGB Histogram displays color tone distribution, exposure status, and overlapping histograms in R, G, B channels.
- Focus Assist (Off, On): Focus Color: Yellow, Red, Green, Blue, White. Peaking Level: 1-8. Highlights in-focus areas for quick focusing.
- Audio Meters (Off, On): Provides numerical indicators and headroom levels.
- Zebra (Off, On): Zebra Level: 0-100. Fills areas over a certain threshold with a striped pattern to highlight overexposed areas.
- Check Field (Monochrome Display: Off, On; Monochrome Display Color: Red, Green, Blue, Gray): Adjusts hue and saturation quickly and accurately.
- False Color (Off, On): Type: Spectrum, ARRI. Depicts objects in colors different from a true color image.
- Marker:
- Crosshatch (Off, On): Type: 3x3, 4x4, 5x3, 5x5, 6x4, 6x6. Color: Yellow, Magenta, Cyan, Red, Green, Blue, White. Divides the picture into equal grids.
- Safe Areas (Off, On): Type: 70%, 80%, 90%, 16:9, 16:10, 4:3, 5:4, 1:1, 1.91:1.1, 4:5, 9:16, 1.85:1, 2.35:1.
- Crosshair (Off, On): Marker Line Color: Yellow, Magenta, Cyan, Red, Green, Blue, White.
- Cinema Guides (Off, On): Type: 16:9, 16:10, 4:3, 1.85:1, 2.35:1, 2.41:1, 1.91:1, 5:4, 1:1.9. Color: Yellow, Magenta, Cyan, Red, Green, Blue, White. Marker Mat Alpha: 0%~75%.
- Image:
- Scan Mode: Under Scan, Over Scan.
- Aspect Ratio (Off, On): Type: Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, User. Under 'User', you can customize Video Width (100%~300%) and Video Height (100%~300%).
- Anamorphic (Lens Off, On): Lens Type: Auto, 1.25X, 1.33X, 1.5X, 1.6X, 1.8X, 2.0X, 2.0X MAG. Allows unsqueezing anamorphic footage.
- Screen Flip: Fixed, Auto. Video Mirror: Default, Lateral Mirror, 180°, Vertical Mirror.
- Zoom Times: 100%~500%. Amplifies HD signal for close-up viewing.
- Image Freeze (Off, On): Freezes the current image.
- Pixel to Pixel (Off, On): Displays the image at 1:1 pixel ratio without scaling.
- User Option:
- LUT Import (SD): Imports LUT files from an SD card.
- LUT Switch (Off, On): Displays built-in and imported custom LUTs (SLOG2, SLOG3, LOGC, VLOG).
- System:
- Display Setup: Brightness, Contrast, Saturation, Hue, Sharpness, Backlight (0-100).
- Color: Color Space (REC709, DCIP3, BT2020), Color Temp (5600K, 6500K, 9300K, User). User allows R, G, B adjustment (0-255).
- Language: English, Chinese, French, German, Italian, Spanish, Portuguese, Russian, Korean, Simplified Chinese.
- OSD Time: Always, 5s, 10s, 15s, 20s, 25s. Sets menu display time.
- OSD Alpha: Off, Low, Middle, High. Adjusts menu background transparency.
- Volume: Adjusts speaker volume.
- Power Display: Shows battery level icon.
- Firmware Update: Displays current version, allows firmware update via SD card.
- Restore: Resets system to original settings.
6.4. Status Column
- HDMI: Displays the resolution of the HDMI input, e.g., HDMI 1920x1080@50p.
- LUT Monitor: When the LUT function is off, it displays "LUT Monitor". When the LUT function is on, it displays the current LUT such as "SLOG".
- Touch Function Status: Displays the status of the touch function.
- Battery Level: When a battery is installed, it displays the battery level. (You can enable/disable this in the main menu under System > Power Display).
6.5. How to Load LUT
- SD Card Format: Support FAT32 or NTFS. For MAC systems, the SD card should be formatted in MS-DOS (FAT).
- Max Files Limit: Maximum 32 LUT files.
- File Requirements:
- The LUT file format suffix must be .cube.
- Single file size must not exceed 7.9MB.
- Supports LUT-3D-Size 16, 17, 32, 33, 64, 65.
- Steps for Loading:
- Make sure the SD card is correctly inserted.
- Enter the main menu “User Option” > “LUT Import” > “Lut Import (SD)” to load. The monitor will auto-detect the SD card.
- A. No SD Card: The screen will show "failed". You can try again, or restart the monitor.
- B. SD Card Present (no valid LUT): The monitor will erase existing user LUTs and show "Initializing". If no valid LUT file is found, it will show "clean up".
- C. Valid LUT File Present: The monitor will load LUT files and show "[n] name". [n] indicates the quantity number, and "name" is from the LUT file name. If loading is successful, the screen will show "complete[n]".
Remark: LUT file names must be in English or Arabic numerals.

7. Maintenance
7.1. Regular Maintenance
- Check for dust accumulation on the interfaces.
- Ensure the equipment voltage is stable.
- Confirm that the wires are not damaged or bent.
- Verify that the fixing devices are securely fastened.
- Ensure all screws are securely fastened.
These measures can significantly reduce the risk of equipment damage and extend its service life.
7.2. Firmware Update
We generally do not recommend casual firmware upgrades. If an upgrade is necessary, please contact customer support for the relevant upgrade file.
- Use an SD card formatted with FAT32 or NTFS (MS-DOS (FAT) for MAC systems). Copy the upgrade file to the SD card.
- Turn on the monitor. Insert the SD card into the SD card slot (chip facing up, press to ensure full insertion).
- Enter the menu, select “System” > “Firmware Update” > “Update” to start the upgrade.
- The monitor will shut down automatically when finished. Please reboot manually.
- Check for the latest version.
Remark: Ensure the device remains powered on throughout the entire upgrading process.
8. Troubleshooting
8.1. Only black and white or monochrome picture:
- Please check saturation, brightness, and contrast adjustments in the menu.
- Please check if "Check Field" is set to black, white, or monochrome image mode, or any other condition that might cause this.
8.2. No Image after powering on:
- Check if the signal cable connection is in good condition.
- Check signal cable connecting, and make sure to use the standard adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged.
8.3. Earphone No sound:
- Check if the Volume control is open. Press the volume button and try to increase the volume.
If there are still other problems, please contact our related technologists for support.
9. Technical Specifications
| Parameter | Value |
|---|---|
| Panel Size | AMOLED 5.5-inch (touch) |
| Resolution | 1080 x1920 pixels |
| Dot Pitch | 94.8(W) × 63.2(H) um |
| Aspect Ratio | 9:16 |
| Color Display | 16.7M (8 bit) |
| Frame rate | 60Hz |
| Brightness | 550cd/m² |
| Contrast | 1,000,000:1 |
| Input | HDMI 2.0 |
| Output | HDMI 2.0, 3.5mm stereo headphone jack |
| Other Interface | SD Card Slot (firmware update/LUT file import), USB-C |
| Power In | Type-C (5V/2A or more) |
| HDMI Input/Output Support Format | 480i/576i/480p/576p 720p (60/59.94/50/30/29.97/25/24/23.98) 1080i (60/59.94/50) 1080p (60/59.94/50/30/29.97/25/24/23.98) 3840×2160p (60/50/30/29.97/25/24/23.98) 4096×2160p (60/50/30/29.97/25/24/23.98) |
| Power Consumption | ≤10W |
| Unit Size | 144x81x23.9 (mm) |
| Unit Weight | 148g |
| Mount Points | ¼-20 thread points (Left, right, top, bottom) |
| Working Temperature | -20℃~60℃ |
| Storage Temperature | -30℃~70℃ |
10. User Tips
- Battery Management: Always ensure your NP-F batteries are fully charged before a shoot to avoid interruptions. Consider carrying spares for extended sessions.
- Screen Protection: While the screen is durable, a screen protector can offer additional defense against scratches and smudges during field use.
- Cable Organization: Use the provided cable management tie to keep your setup tidy and prevent accidental disconnections or damage to ports.
- LUT Customization: Experiment with different 3D-LUTs to find the best look for your specific camera and shooting environment. Keep your LUT files organized on your SD card.
- Touchscreen Responsiveness: If the touchscreen seems unresponsive, ensure it's clean and dry. A quick toggle of the touch function via the power button can also help.
11. Warranty and Support
The FEELWORLD PS6 monitor comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For technical support, troubleshooting assistance, or warranty claims, please contact FEELWORLD Global Store customer service. You can find contact information on the official FEELWORLD website or through your purchase platform.
For a complete and detailed user manual, you can refer to the official PDF document: FEELWORLD PS6 User Manual (PDF).
12. Product Video
Watch the official product video for a visual guide on the FEELWORLD PS6 monitor's features and usage.