MEKEDE Android Auto Wireless CarPlay Car Radio Screen

Contents

MEKEDE Android Auto Wireless CarPlay Car Radio Screen User Manual

Model: Android Auto Wireless CarPlay Car Radio Screen

Brand: MEKEDE

1. Introduction

This intelligent car audio-visual navigation system is a brand new and upgraded Android system navigation product. It integrates GPS navigation, WiFi Internet access, car theater, and fashion entertainment.

The satellite navigation system adopts advanced intelligent voice navigation technology to provide detailed navigation information, making it convenient during the driving process. The rich entertainment system offers a shocking experience with full personality in your car life.

The condensing of cutting-edge technology has created a powerful and highly open intelligent vehicle information system. Explore new joys, feel modern life, and enjoy driving fun!

2. Safety Precautions

2.1. General Warnings

  1. Please read all relevant instructions carefully before using this device. Any damage to the unit caused by failure to follow the instructions will void the warranty.
  2. To ensure driving safety and avoid violating traffic rules, do not watch programs or operate the machine while driving.
  3. To avoid short circuit, do not expose this unit to rain.
  4. To prevent short circuit, do not place or leave any metal objects (such as coins or metal tools) inside the device.
  5. Please use the machine according to this manual. Do not open the machine for maintenance by yourself. If maintenance is required, please go to a professional maintenance station.
  6. When the engine is off, do not use the car audio for a long time, otherwise it will drain the electricity in the battery.
  7. Do not insert objects into ventilation slots or other openings of the device.
  8. Do not touch, rub, or knock the screen with sharp objects.

2.2. Cleaning Equipment

  • If the panel of the device is stained, you can use a clean soft cloth to wipe off the stains.
  • If the panel is very dirty, wipe off the dirt with a neutral detergent, and then wipe off the detergent with a clean soft cloth.
  • CAUTION: Using cleaning sprays directly on the device may affect the mechanical parts. Use a hard cloth or volatile liquid (such as thinner or alcohol) to wipe the panel, which may scratch the surface or erase characters.

3. Setup & Installation

3.1. Product Overview and Components

The package includes the main unit and various cables for installation.

MEKEDE Android Auto Wireless CarPlay Car Radio Screen for Fiat 500L 2012-2017
Image: MEKEDE Android Auto Wireless CarPlay Car Radio Screen for Fiat 500L 2012-2017, showing the unit before and after installation in a car dashboard.
Car multimedia player parameter table
Image: Car multimedia player parameter table, detailing specifications for X1 and X2 models.

Package Contents:

Package Contents Diagram
Image: Diagram showing the main unit, power cable + Canbus box, RCA cable, USB cable, reversing camera cable, and GPS antenna.
  • Main Unit
  • Power Cable + Canbus Box
  • RCA Cable
  • USB Cable
  • Reversing Camera Cable
  • GPS Antenna

3.2. Wiring Diagram: Back of the Host Device

Back of the host device wiring diagram
Image: Detailed wiring diagram for the back of the host device, showing connections for audio/video multifunctional plug, camera input, USB ports, and various power/control wires. Note: If your car needs a Canbus box, please use the cable provided.

3.3. Rear View Camera Connection

Rear view camera connection diagram
Image: Diagram illustrating how to connect the rear view camera. It shows the red cable (2) connected to the back light "+", black cable (1) to "GND", and the reverse detection cable (4, brown color) to the red cable (3) extending from the video output cable.
  1. Red cable (2) is connected to the back light "+".
  2. Black cable (1) is connected to the "GND".
  3. The reverse detection cable (4, brown color) is connected to the red cable (3) which extends from the video output cable. Follow the picture above to connect.

Attention! Rear view camera is optional, please choose the package with camera to buy.

3.4. Initial Power On

When you plug in the car key and turn on the ACC power supply, the device will automatically turn on and display the start-up LOGO animation. When you take off the car key and turn off the ACC power supply, the device will automatically shut down.

Car radio screen displaying welcome message
Image: The car radio screen displaying a "WELCOME Intelligent Navigation System" message upon startup.

4. Operating Instructions

4.1. Panel Buttons

Refer to the physical panel for button functions. In case of deviation, refer to the actual product.

Button Function
POWER Short press to turn on (if off). Long press to turn off screen (if on).
VOLUME (+/-) Adjust volume up (+) or down (-).
HOME Return to the main interface from any application.
RETURN Return to the previous interface or close the current dialog.
MIC HOLE Microphone input.
RST HOLE Reset button.

4.2. Main Interface

Click the physical button on the host panel or press the Home button to enter the main interface. Press and hold the page to swipe left and right to turn the page.

Main Interface of the Car Radio Screen
Image: The main interface of the car radio screen, showing local music, navigation, and apps sections.

The main interface provides quick access to:

  • Date and time display.
  • Music Player (Previous/Play/Next).
  • Navigation.
  • Applications.
  • Radio.
  • Settings.
Main Interface with icons for Radio, Navigation, Apps, Music, Settings
Image: Main interface with icons for Radio, Navigation, Apps Entrance, Music, and Settings at the bottom.

4.3. Drop-down Settings Bar

In any mode, pull down and swipe the touch screen to display the drop-down Settings bar. This bar includes multiple shortcut switches, screenshot, Wi-Fi, and auto brightness. Drag the sliders to adjust brightness and volume.

Drop-down settings bar with quick toggles
Image: Drop-down settings bar showing quick toggles for Wi-Fi, Bluetooth, Screen saver, Screen off, Settings, Signal Reset, One-click acceleration, Screenshot, Restart, Floating Ball, Mute, Auto brightness, and sliders for volume and brightness.

4.4. Task Manager

Click the Task Manager icon to view currently running applications. Press and hold an application icon to drag it left/right or click the "Close" button to delete the program.

Task Manager interface
Image: Task Manager interface showing running applications like Theme, Launcher4, Music, Radio, and BT Music.

4.5. Application Program

Tap the "App" icon to open the application interface, which includes multiple built-in and third-party apps. Hold down the interface and swipe left and right to turn the page.

Application interface page 1
Image: Application interface showing icons for Music, Radio, BT Music, BT Phone, Video, Settings, Key learning, AUX, AV input, and Camera.
Application interface page 2
Image: Application interface showing icons for QuickPic, File, Equalizer, Theme, Chrome, Play Store, Maps, YouTube, Car info, and Car Manage.

4.5.1. Third-party Application Installation

  1. First, download the third-party application to be installed on your computer, then copy the downloaded APK to a memory card or USB flash drive.
  2. Insert the memory card or USB disk into the machine. Click the "File" icon in the Application interface to open the "File Manager" interface, find the downloaded APK, and install it.

4.6. Music Player

The music player can play audio files from USB, SD card, and built-in hard disk devices. This product supports MP3, WMA, WAV, M4A, MID, etc. If playing an unsupported music format, it may prompt that the format is not supported and cannot be played.

From the Main interface, click the music plug-in button or double-click an audio file in the "File Browse" interface of the application to start it.

Music Player Interface
Image: Music player interface showing song name, artist, album name, playback controls (Previous, Play/Pause, Next), cycle mode (Random/Single/List), and sound effect settings. A progress bar is also visible.

Video: Demonstration of the car radio screen's user interface, including music playback, settings, and other features.

4.7. Bluetooth Phone

4.7.1. Opening Bluetooth Phone

Click the phone icon to open the Bluetooth phone interface.

Bluetooth Phone Dialpad Interface
Image: Bluetooth phone interface showing the dialpad, contacts, recent calls, and Bluetooth pairing options.

4.7.2. Pairing Bluetooth Device

Before using the car Bluetooth phone, you need to pair and connect your mobile phone with the car machine.

  1. Turn on the Bluetooth function of your mobile phone.
  2. Open the "Bluetooth pairing" interface and turn on the pairing switch (OFF/ON) to enable matching.
  3. The system will search for your vehicle (within 10m). After selecting the device, a "Bluetooth Pairing Request" pop-up box will appear on your mobile phone. Click the "Pairing" button to connect, or enter the PIN code (default is "0000" or "1234") to connect.
Bluetooth Pairing Interface
Image: Bluetooth pairing interface showing device discovery, mobile link status, device name (CarBt-6b73), PIN number, and paired device status.

4.7.3. Synchronizing Contacts

After the phone connection is successful, click "Contacts" on the left to open the interface. Click the synchronize button to synchronize the phonebook from your mobile phone. You can then view the contact list and numbers. Click a contact to quickly make a call. You can also clear the phonebook information by clicking the delete button.

Bluetooth Contacts Interface
Image: Bluetooth contacts interface showing a contact entry (Allen, 1380013800) with options to synchronize and delete contacts.

4.7.4. Making Calls

After the phone is successfully connected, click "Dial" on the left to open the dial interface. Enter the number using the number keys, and click the call button to make a call. When inputting a number, the phone number will be displayed on the right to enable quick dialing.

Bluetooth Phone Dialing Interface
Image: Bluetooth phone dialing interface with a dialpad, options to delete digits, display entered number, and initiate a call.

4.7.5. Call Interface Options

There are two situations in the call interface:

  1. Under the "Bluetooth Application" interface, after connecting to the phone, enter the call interface. When the call is over, click the hang-up icon to end the call.
  2. Under other programs, the call interface will pop up as a floating window. Click the call icon to connect the call. The call will switch to a floating circle frame. Click the hang-up icon to end the call, or if the mobile phone hangs up by itself, the small window will disappear automatically.
Bluetooth Call Interface
Image: Bluetooth call interface showing an active call (10086) with options to hang up, transfer call, mute, and access the numeric keypad.
Floating Call Interface with Navigation
Image: Floating call interface overlaid on a navigation map, showing a call in progress while navigation is active.

4.8. Bluetooth Music

Click the Bluetooth music icon in the "Application" interface to enter the Bluetooth Music interface. This function allows wireless playback of music files from your phone via Bluetooth. Ensure your phone supports the corresponding Bluetooth protocol. When the Bluetooth device is connected to the phone, the sound system automatically connects to the paired phone. (Note: Depending on the phone model, in some cases, the audio file may need to be started from the phone keyboard).

Bluetooth Music Interface
Image: Bluetooth music interface showing song information (song name, artist, album name) and playback controls. It indicates a connected Bluetooth device.

4.9. Navigation Map

Click the navigation icon in the Main Interface to enter the navigation program (e.g., Google Maps). To exit the navigation screen and switch to the home screen, press the Home button. After exiting, navigation continues in the background.

Navigation Map Interface
Image: Navigation map interface showing a map with a route, current speed, distance, and estimated time of arrival.

4.9.1. Guide Before You Go

  1. Ensure the host is correctly connected to the satellite dish. The satellite dish needs to receive satellite signals during startup and update internal information. After a few moments, it should work normally, with the status bar showing that the satellite has been located.
  2. Ensure the vehicle is not located in a place with poor satellite reception, such as a tunnel, under a bridge, or near a tall building.
  3. The driver should first set the navigation destination while parked and not operate navigation during driving.

4.9.2. Navigation Function

  1. You can find your destination using various retrieval functions of the navigation software. After setting it as the destination, start planning the path and navigate.
  2. In areas where the driver is familiar with the route, choosing to drive on your own may be more suitable than routes mapped out by navigation software.

4.9.3. Navigation Map Description

Due to the rapid development of urban construction and road traffic, navigation map companies continuously update navigation maps. Please timely unpack and update the navigation map information.

4.10. Settings

Click the Settings icon to open the System Settings screen. Drag the left side up and down to view all settings. You can switch WLAN, navigation, display, wallpaper, reverse camera, radio settings, date and time, key learning, and About information.

System Settings Menu
Image: System Settings menu showing options like WLAN, NAVI, Display, Reverse Camera, Radio, Datetime, Keys, System, and About.

4.10.1. Wi-Fi Setting

Click "WLAN" on the left to enter the wireless network setting interface. Turn on the Wi-Fi switch. The machine will automatically search for nearby wireless signals, connect, and display the connection status. If you need to enter a password, click the "Connect" button. After entering the password and connecting successfully, you will not need to perform this operation again. After restarting the system, it will automatically connect to the matched wireless network.

Wi-Fi Settings Interface
Image: Wi-Fi settings interface showing available networks (js2, 666, JieSun, XDF-B312, MC119-1C04) and their connection status, with a toggle for Wi-Fi ON/OFF.

4.10.2. Navigation Settings

Click "NAVI" on the left to enter the navigation settings interface. The default navigation selection is Google Maps. Turn on the navigation mix switch and drag the slider left and right to adjust the background media volume.

Navigation Settings Interface
Image: Navigation settings interface showing options to set default navigator (Maps), more apps, and adjust navigation mix volume.

4.10.3. Display Setting

Select "Display" to enter the display setting interface. Hold down the list and slide up and down to turn the page. You can adjust brightness, auto brightness, key light, and language.

Display Settings Interface
Image: Display settings interface showing options for brightness, auto brightness, front/rear visual brightness, key light, individuation, and language settings.

4.10.4. Reverse Camera Settings

Click "Reverse Camera" on the left to enter the image setting interface. Hold down the list and slide up and down to turn the page. You can set the radar reference line, camera format, guide line, mirror, and mute options for the "backward view" and "forward view" interfaces.

Reverse Camera Settings Interface
Image: Reverse Camera settings interface showing options for camera format (AHD 720P25), guide line (Follow up), radar, mirror, mute, and quick exit astern.

4.10.5. Radio Settings

Click "Radio" on the left to enter the radio settings interface. Hold down the list and slide up and down to turn the page. You can set the radio signal strength (High, Middle, Low), radio antenna power supply, and radio area selection.

Radio Settings Interface
Image: Radio settings interface showing options for setting radio signal strength (High, Middle, Low), radio antenna power supply, and radio area selection (Asia 87.5-108.50 KHz).

4.10.6. Date and Time Settings

Click "Datetime" on the left to enter the Date and Time Settings interface. You can set the date, time, time zone, use 24-hour format, automatic date & time, and auto time-zone.

Date and Time Settings Interface
Image: Date and Time Settings interface showing options to set date, time, time zone (GMT + 08:00, China Standard Time), 24-hour format, automatic date & time, and auto time-zone.

4.10.7. System Settings

Click "System" on the left to enter the System Settings interface. Here you can configure start-up prompt announcements, power on multimedia memory, volume modulation of music, driving position, enable voice wakeup, and access advanced settings like factory settings.

System Settings Interface
Image: System Settings interface showing options for start-up prompt announcement, power on multimedia memory, volume modulation of music, prohibit video, float ball, driving position, enable voice wakeup, system update, and factory settings.
4.10.7.1. Factory Settings

In the System Settings interface, click "Factory Settings" and enter the password "8888" to access the factory settings interface.

Factory Settings Password Input
Image: Factory Settings password input screen with a numeric keypad.
4.10.7.2. Restore Factory Settings

Click the "Restore Factory Settings" button in the System Settings interface and enter the password "8888" to perform the operation. Restoring factory settings will delete third-party software and current system settings. You will need to reinstall the corresponding APKs. Exercise caution when performing this operation.

4.10.8. About

Click "About" on the left to enter the "About" interface, which displays product information, software version, and service version.

About Interface
Image: About interface showing product information (2+32G), product name (Car Navigation), model (No Protocol-Common), product info (CMWYZX 80-UI), Android Version (Android 15), Software Version, and Service Version (4.1.1614 Release).

4.11. Key Learning (Steering Wheel Control)

Click the steering wheel icon in the Application Interface to enter the Key Learning interface.

Key Learning Interface
Image: Key Learning interface showing options for Touch key, Steering wheel button, Panel key, and Panel twist button learning. It also displays a virtual keypad for assigning functions.

4.11.1. Touch Key Learning Steps

  1. Click "Start Learning" to enter learning mode, and select the touch button you need to learn on the interface.
  2. After pressing the corresponding touch button on the device, click the "Save" button. The learned state will be displayed on the interface.
  3. Repeat steps a and b until you have learned all the keys.
Touch Key Learning Interface
Image: Touch Key Learning interface with a virtual keypad for assigning functions to touch keys. It shows "Start learning" and "Clear" buttons.

4.11.2. Steering Wheel Key Learning Steps

Connect the positive and negative poles of the steering wheel control line of the original car with the positive and negative poles of the square control line of the machine. Refer to the "Touch button Learning Steps" section. Press the keys on the steering wheel one by one to complete the settings of all keys.

Steering Wheel Key Learning Interface
Image: Steering Wheel Key Learning interface showing a virtual keypad for assigning functions to steering wheel buttons. It includes "Start learning" and "Clear" buttons and instructions for learning methods.

4.11.3. Panel Key Learning Procedure

Press the buttons on the panel one by one by referring to the "Touch Key Learning Steps" section to complete all key settings.

4.12. Video Rearview System

The system provides:

  • Fast automatic switch to display the rear image of the vehicle when reversing, to fill the blind area of sight.
  • Third speed distance reference line to help you make sound judgment.
  • The astern radar is displayed on the left side, and the visual display informs the driver of the surrounding obstacles.
Video Rearview System Display
Image: Video rearview system display showing a car with parking guidelines and a warning message "Please check the surroundings and pay attention to safety!".

4.13. Radio Station

Click the radio icon in the application interface to enter the Radio interface. The radio has functions such as searching stations and saving stations. When switched to the radio playback state, the system will automatically play the station that was playing when the radio was last turned off. After the automatic station search ends, the program will automatically update and save the station list.

Radio Station Interface
Image: Radio station interface showing FM frequency tuner, station presets, and controls for search and sound effects.

There are a total of 12 pre-stored stations in the list of station favorites. Swipe left and right to view all channels. For favorite radio stations, users can long press the current channel to bookmark and save it.

Radio Controls and Favorites
Image: Radio controls showing icons for Collect, List, Previous, Next, Search, and Sound effect.

4.14. Video Player

Tap the video icon in the Application interface to enter the Video File List interface. Hold down the interface and swipe left and right to view the list information. The video file displays the cover picture, video name, and video playing duration.

Video File List and Player Interface
Image: Video file list and player interface. The left panel shows the application menu with Update and Reboot options. The right panel shows the video player with playback controls and a progress bar.

Click the video file to enter the Video Play screen.

Video Play Screen
Image: Video play screen showing a video playing with playback controls, progress bar, and current time/total time.

4.15. Theme

In the Application screen, press the Theme icon to enter the Theme interface. You can choose themes, screensavers, and wallpapers, as well as upgrade theme packs online. The system provides 15 sets of theme styles.

Theme Selection Interface
Image: Theme selection interface showing various theme previews (10001 to 10006) and options for Theme, Screensaver, Wallpaper, and Update.

4.15.1. Screensaver

Click the "Screensaver" button to enter the screen saver setting interface. You can select different screen saver styles. The drop-down screen is displayed to enter "Shortcut Settings". Click the "Screensaver" shortcut button to enter the screensaver state.

Screensaver Settings Interface
Image: Screensaver settings interface showing different screensaver options.

4.15.2. Wallpaper

Click the "Wallpaper" button to enter the wallpaper setting interface. You can select and click a background picture directly to set it as the wallpaper, or you can customize the wallpaper by selecting a picture from the album.

Wallpaper Settings Interface
Image: Wallpaper settings interface showing default and custom wallpaper options.

4.15.3. Update Theme Packs

Click the "Update" button to enter the upgrade theme package interface. You can choose to upgrade a single theme or download all available updates.

Theme Update Interface
Image: Theme update interface showing available theme packs (10001, 10002, 10003) with their sizes and "upgrade" buttons, along with a "Full upgrade" option.

5. Specifications

Parameter Model X1 Model X2
RAM/ROM 1GB+16GB 2GB+32GB
OS Android 14 Android 14
Core 4-Core 4-Core
CarPlay + Android Auto Yes Yes
Resolution 1024*600 1024*600
Screen IPS IPS
Internet WIFI WIFI
Camera/DVR Optional Optional
BT module Yes Yes
Radio FM FM

General Features:

  • Display Size: 10"
  • Voltage: 12 V
  • Output Type: Colored
  • Special Features: Built-In Speaker/Microphone, Wi-Fi function, Support steering wheel control, Support Can-Bus, Built-in GPS, Mobile Phone, MP3 players, CarPlay, Android Auto, Reversing Input, Split Screen
  • Digital Media Format: Mp3, MP4, WMA, JPEG
  • OSD Language: Chinese (Simplified), Chinese (Traditional), Arabic, Irish, Estonian, Belarusian, Bulgarian, Icelandic, Polish, Danish, German, Russian, French, Filipino, Finnish, Korean, Dutch, Czech, Croatian, Latvian, Lithuanian, Romanian, Malay, Norwegian, Portuguese, Japanese, Swedish, Serbian, Slovak, Slovenian, Thai, Turkish, Ukrainian, Hebrew, Greek, Spanish, Hungarian, Italian, English, Vietnamese
  • For Vehicle Brands/Model: FIAT (specifically Fiat 500L 2012-2017)
  • Certification: CE, FCC

6. Troubleshooting

6.1. Steering Wheel Control Issues

If the product contains CANBUS and the steering wheel control does not work, please check the following operations:

  1. If your unit has a Canbus box: Before starting the setup, please confirm the Canbus box and 8pin serial cable are connected to the multimedia unit. Then, refer to the picture below to set your car model.
  2. Steering Wheel Control Setup with Canbus Box
    Image: Instructions for setting steering wheel controls when a Canbus box is present, showing wiring connections and on-screen menu options for "Factory settings" and "Change model".
  3. If your unit does not have a Canbus box: Refer to the photo below to set the steering wheel control.
  4. Steering Wheel Control Setup without Canbus Box
    Image: Instructions for setting steering wheel controls when no Canbus box is present, showing on-screen menu options for "Universal no protocol vehicle" and "Steering wheel button learn" with key learning methods.

If you encounter any questions, please leave us a message in time.

6.2. Rearview Camera Connection Issues

If you have problems installing the rearview camera, please check the wiring diagram in section 3.3. If you still can't solve the problem, please contact us through the message system.

6.3. Wireless CarPlay and Android Auto Connection

For the first connection, you need to turn on the phone's Bluetooth to pair with the car's Bluetooth. After successful pairing, the car radio will automatically jump to the RLink or AutoLink interface. At this time, your phone will display a prompt message "use CarPlay with ZLink or AutoLink". Click confirm, and CarPlay will be connected.

Wireless CarPlay and Android Auto Connection Steps
Image: Diagram illustrating connection steps for Wireless CarPlay and Wireless Android Auto. For CarPlay, connect BT, then click "R Lin-k". For Android Auto, connect BT, then click "Android Auto App". Both can also be connected via USB cable.

7. User Tips

  • Ensure all cables are securely connected, especially the Canbus box and 8pin serial cable if your unit uses them, for proper steering wheel control functionality.
  • When setting up steering wheel controls, follow the on-screen instructions carefully, pressing and releasing buttons as indicated.
  • For rearview camera installation, double-check the power and ground connections to the car's reverse light circuit.
  • If experiencing issues with wireless CarPlay/Android Auto, ensure your phone's Bluetooth is on and successfully paired with the car unit before attempting to launch the respective apps.
  • Regularly check for system updates to ensure optimal performance and access to new features.

8. Warranty & Support

This product comes with a 12-month Manufacturer's limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.

Defective items MUST be reported and returned within the warranty period (and in the original packaging if possible). You must tell us what the defect is and give us your order number. We DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.

You agree to all of the above-listed policies upon ordering.

For support or to report a defective item, please contact the seller directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.