1. Introduction
This manual provides detailed instructions for the installation, setup, and operation of your Prelingcar 12.3-inch LCD Car Digital Cluster. This digital instrument panel is designed to enhance your driving experience with advanced features and customizable displays. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Safety Information
- Ensure the vehicle's ignition is off and the battery is disconnected before beginning any installation work to prevent electrical shorts or damage.
- If you are unsure about any part of the installation process, it is recommended to seek professional assistance.
- Do not attempt to disassemble or modify the digital cluster, as this may void the warranty and cause damage.
- Always drive responsibly and avoid operating complex settings while the vehicle is in motion.
3. Package Contents
The package typically includes:
- Prelingcar 12.3-inch LCD Car Digital Cluster
- Necessary wiring harnesses and connectors
- Installation tools (may vary)
- User Manual (this document)
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | PRELINGCAR |
| Operating System | Linux |
| Screen Size | 12.3 inch HD IPS |
| Resolution | 1920x720 |
| CPU | T5 1.5Ghz |
| Factory Voltage | 9V-16V |
| Operating Current | 0.8A-1.5A |
| Standby Current | Less than 3MA |
| Special Features | 9 inch LED digital, CarPlay/Android Auto support, Multi-language, Customizable UI themes |
| Placement on Vehicle | Dashboard |
| Material | ABS |
| Item Weight | 3.5 kg |
| Item Dimensions (L x W x H) | 40 cm x 30 cm x 20 cm |
5. Setup & Installation
For a detailed installation video, please refer to the Google Drive link: Installation Video. Search for your specific car model on this website for detailed instructions.
5.1. Pre-installation Settings
- Set Speed Limit and Turn Off Winter Tires:
Before installing the digital cluster, set the speed limit alarm to 250 km/h and turn off the winter tires function in your original car's settings. This prevents potential conflicts or alarms after installation.
Image: Original car dashboard displaying settings for speed limit (250 km/h) and winter tires (off).
- Retain Original Buzzer:
If your original car's motherboard has a buzzer, ensure it is retained and connected. Failure to do so may result in alarm sounds not working or other functions being impaired.
Image: Original car motherboard with the buzzer component highlighted in red.
- Retain Small Motherboard:
If your original car's dashboard cluster includes a small motherboard, as shown in the picture, you must retain it and install it with the new digital cluster. This ensures compatibility and proper function of original car information.
Image: A small car motherboard component that needs to be retained.
5.2. HDMI Connection for Android Player Synchronization
If you have an aftermarket Android player and wish to synchronize its display with the digital cluster, follow these steps:
- Connect the HDMI output from the digital cluster to an HDMI cable.
- Connect the other end of the HDMI cable to an HDMI exchange box.
- Connect the HDMI exchange box to a USB port on your Android player.
- Once connected, open the digital cluster's navigation interface and press the down button to activate the synchronized display.

Image: Diagram illustrating the HDMI connection from the digital cluster to an HDMI exchange box, then to the Android player's USB port.
5.3. Non-Destructive Installation
The digital cluster is designed for non-destructive installation, meaning no cutting of wires, soldering, or drilling is required. It retains original car information functions.

Image: Visual representation of non-destructive installation, highlighting 'Unbroken line', 'Solderless', and 'No-drill'.
6. Operating Instructions
The Prelingcar digital cluster runs on a stable Linux operating system, offering a fast and smooth user experience.
6.1. Initial Setup and Preferences
After installation, navigate through the settings menu to configure the cluster to your preferences.
- Fuel Tank Settings:
If the fuel tank level displayed is inaccurate, fill the tank completely, then access the settings to input the full tank value and calibrate. This section allows you to set fuel quantity, calibration, and sensitivity.
Image: Digital cluster UI showing options for fuel tank settings including Refuel Quantity, Fuel Tank calibration, and sensitivity.
- Car Type Selection:
Go to the 'Car Type' setting and select your specific vehicle model. After selection, turn off the engine, power, lock the car, wait for 5 minutes, then restart for the changes to take effect.
Image: Digital cluster UI displaying the 'CarType' selection menu, showing 'MQB_Golf' as an example.
- Speed Calibration:
In the dashboard settings, under 'calibration settings' (second item), enter the difference between the displayed speed and the actual speed to calibrate the average speed value.
Image: Digital cluster UI showing speed calibration options.
- Consumption Settings:
In the dashboard settings, under 'calibration settings' (third item), modify to manual and enter the difference between the actual consumption displayed and the average consumption value to calibrate.
Image: Digital cluster UI displaying consumption settings.
- Unit Settings (PQ Platform):
Configure units for distance, vehicle speed, volume, consumption, temperature, pressure, and time.
Image: Digital cluster UI showing unit settings for various parameters.
- General Preferences:
Access the 'Preference' menu for various minor settings including oil pressure detection, physical light, mirror back, manual transmission, race mode, boot sound, tire pressure, MIL check, phone mirror, rear door follow, brake pad inspection, voltage display frequency, reverse left/right, width indicator light, move up/down, zoom ratio, and time source.
Image: Digital cluster UI displaying general preference settings.
- Dashboard Type Settings:
Within the dashboard type settings, you can configure the sport speed and RPM (6000 RPM for diesel or 8000 RPM for gas).
Image: Digital cluster UI showing dashboard type settings, including dial style and RPM options.
- Language Settings:
The cluster supports 20 different languages. Navigate to the 'Language' setting to select your preferred language.
Image: Digital cluster UI displaying language selection, with English highlighted.
- LHD/RHD Configuration:
If your vehicle is Right-Hand Drive (RHD), go to the configuration settings to adjust it for LHD or RHD.
Image: Digital cluster UI showing LHD/RHD configuration options.
- Trip Settings:
Access 'Travel Data', press OK, select 'Reset Trip', and confirm to reset trip data.
Image: Digital cluster UI displaying trip settings, including options to view and reset trip data.
- UI Theme Settings:
Change the UI theme from Golf 8 style to Golf 7 style. Go to 'Settings', then 'Theme', and select either G8 or G7, then press OK.
Image: Digital cluster UI showing theme selection, with options for G7 and G8 styles.
- Radio Display Zone Settings:
In the 'Preference' menu, select 'Zoom Radio' and adjust the radio display zone from 1.0 to 0.** as desired.
Image: Digital cluster UI displaying radio display zone settings within the preferences menu.
6.2. CarPlay / Android Auto Functionality
The digital cluster has a built-in CarPlay chip, supporting wireless CarPlay and Android Auto. This allows you to share maps, music, and videos directly from your phone to the cluster display.
- Connecting CarPlay:
Access the 'CarPlay' option in the menu. Once connected, press to open the menu and choose to adjust the display region or switch devices. - Adjust Region:
This setting defines the interface display zone. - Switch Devices:
This allows you to switch between CarPlay, AirPlay, Android Auto, and HiCar. If you have an Android phone, select Android Auto to connect directly via Bluetooth.

Image: Digital cluster UI displaying CarPlay/Android Auto settings, including options to adjust region and switch devices.
6.3. Multimedia and Camera Integration
The digital cluster supports synchronized display of various multimedia and camera inputs:
- Rear Camera: View the feed from your rear camera directly on the cluster.
- 360° Camera: Integrate and display a 360-degree camera view.
- DVR (Driving Video Recorder): Playback recorded footage from your DVR.
- CarPlay/Android Auto: Seamlessly integrate your smartphone for navigation, music, and other apps.
By connecting a middle cable, the cluster can sync display from an Android player. When choosing a theme, the digital mode can be full screen from the Android player to the digital cluster, enriching the car life with the Android player.

Image: Digital cluster displaying synchronized inputs from rear camera, 360-degree camera, DVR, and CarPlay/Android Auto.
6.4. Customizable UI Themes and Ambient Lighting
The cluster offers multiple dial styles and UI themes, including new Golf 8 UI and classic G7 UI designs. It also supports 30 colors of ambient lighting, which synchronize with the car's existing ambient lighting for an immersive experience.

Image: Examples of new Golf 8 UI and classic G7 UI designs, along with ambient lighting color selection.
Video: Prelingcar Carplay HDMI Digital Cluster Demo
Video: Demonstrates the CarPlay HDMI digital cluster, showing various UI themes, day/night modes, and language settings.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the screen and surrounding areas. Avoid abrasive cleaners or solvents that could damage the display or finish.
- Software Updates: The manufacturer provides free updates for firmware, software, UI, and GPS navigation maps. Check the official website or contact support for the latest updates.
- Temperature: The automotive-grade chip is resistant to high temperatures up to 80°C and low temperatures down to -40°C, ensuring reliable operation in various climates.

Image: Diagram illustrating the temperature resistance of the automotive-grade chip, from -40°C to 80°C.
8. Troubleshooting
- No Power/Display: Check all power connections and ensure they are securely plugged in. Verify the vehicle's battery is charged.
- Inaccurate Fuel/Speed Readings: Perform the fuel tank and speed calibration steps as described in Section 6.1.
- Buzzer Not Working: Ensure the original car's motherboard buzzer was retained and properly connected during installation.
- CarPlay/Android Auto Connection Issues: Verify Bluetooth is enabled on your phone and the cluster. Ensure the correct device is selected in the CarPlay settings.
- Display Lag/Delay: The Linux OS is designed for stability and smoothness with zero caching. If you experience lag, ensure all connections are secure and try restarting the vehicle.
9. User Tips
- Customization: Explore the various UI themes and ambient lighting options to personalize your dashboard experience.
- Smartphone Integration: Utilize the wireless CarPlay/Android Auto feature for seamless access to navigation, music, and communication apps.
- Safety First: While the digital cluster offers many features, always prioritize road safety. Adjust settings or view complex information only when the vehicle is stationary.
10. Support & Warranty
The manufacturer offers a 2-year warranty on the product. If you encounter any issues within 365 days of receipt, free return and refund are supported within 15 days, or a new machine replacement will be provided. Please contact customer service for any communication or support needs. An engineer team is available to assist with installation queries.
For further details, you may refer to the official user manual PDF: View User Manual (PDF)