JIKONG JK-BD6A24S Series

Contents

JIKONG JK-BD6A24S Series Smart Active Balance BMS User Manual

Model: JK-BD6A24S Series | Brand: JIKONG

1. Introduction

The JIKONG JK-BD6A24S Series Smart Active Balance Battery Management System (BMS) is designed to efficiently manage and protect Li-Ion, LiFePo4, and LTO battery packs. This BMS features active balancing technology, which transfers energy between cells to maintain voltage equilibrium with minimal energy loss, ensuring a longer lifespan and stable performance for your battery.

Active balancing operates continuously during charging, discharging, or idle states until the voltage difference between cells is within a set range. This method is highly effective for larger capacity battery packs, utilizing balancing currents typically ranging from 1A to 2A without generating excessive heat.

Diagram illustrating active balancing of battery cells
Figure 1: Active Balancing (Lossless Balancing) principle, showing energy transfer between cells to achieve voltage balance.
Diagram showing accurate cell balancing for improved battery performance
Figure 2: Accurate and efficient balancing of cell voltage difference for longer lifespan and stable performance, highlighting intelligent active balancing technology.

2. Package Contents

Please verify that all items are present in your package:

  • BMS Unit x 1
  • Sampling Line x 1 (70cm long)
  • NTC (Temperature Sensor) x 1 (40cm long)
  • Switch Key x 1 (50cm long)
Image showing the contents of the JIKONG BMS package: BMS unit, sampling line, NTC sensor, and switch.
Figure 3: Packing List for the JIKONG BMS.

3. Setup and Installation

Follow these steps carefully for proper installation and wiring of your JIKONG BMS:

  1. Connect all balance wires from your battery cells to the sampling line. Ensure correct polarity and sequence.
  2. Insert the sampling cable into the designated port on the BMS.
  3. Connect the B- line (main negative) from the battery pack to the B- terminal on the BMS.
  4. Connect the P- line (load negative) from your load/charger to the P- terminal on the BMS.
  5. Connect the P+ line (main positive) from the battery pack to the P+ terminal on your load/charger.
  6. Connect the NTC temperature sensor to the BMS and place it appropriately on the battery pack for accurate temperature monitoring.
  7. Connect the switch key to the BMS if you intend to use it for power control.

Wiring Diagrams

Wiring diagram for a 4-string battery cell configuration with JIKONG BMS.
Figure 4: Wiring method for 4-string cells. Shows connections for B+, B-, P-, P+, and balance wires, including connections to motor, inverter, and charger.
Wiring diagram for an 8-string battery cell configuration with JIKONG BMS.
Figure 5: Wiring method for 8-string cells. Similar to 4-string but with additional balance wire connections.

BMS Interfaces

The JIKONG BMS offers rich interfaces for various functionalities:

Image showing the various interfaces on the JK-B2A8S30P BMS board.
Figure 6: Interfaces on JK-B2A8S30P BMS, including NTC1, GPS (customized), Display, Sampling, CAN2, RS485, Heat, and Parallel interface (customized).
Image showing the various interfaces on the JK-B1A8S10P BMS board.
Figure 7: Interfaces on JK-B1A8S10P BMS, including NTC2 (customized), GPS (customized), Display, Sampling, and Heat.

4. Operating Instructions

4.1. Mobile App and PC Software

The JIKONG BMS supports mobile phone Bluetooth APP "JIKONG SMART BMS" for iOS, Android, and HarmonyOS systems, as well as PC software for comprehensive data monitoring and parameter adjustment. The APP supports multiple languages and automatically switches with your mobile phone system.

Screenshot of JIKONG BMS mobile app, PC software, and home storage display.
Figure 8: Multi-screen display and data connection options, including mobile APP, PC software, and dedicated home storage display. Displays real-time data such as Voltage, Current, Temperature, SOC, Alarms, and Cycles.

4.2. Intelligent Interaction and Easy Operation

The software allows you to freely adjust multiple protection values such as overcharge, overdischarge, overcurrent, temperature, and balance settings. It is recommended to read the internal parameters of the protection board first before making any changes.

Screenshot of JIKONG BMS PC software interface for adjusting parameters.
Figure 9: Intelligent interaction and easy operation via PC software, allowing adjustment of protection values.

With a single click, you can view critical information such as voltage, current, temperature, and the number of strings on a dedicated display or through the app.

Image of a dedicated display showing JIKONG BMS data.
Figure 10: Dedicated display for JIKONG BMS, showing real-time battery information.

5. Maintenance

To ensure the longevity and optimal performance of your JIKONG BMS and battery pack, consider the following maintenance tips:

  • Regular Monitoring: Periodically check the battery parameters via the mobile app or PC software to identify any anomalies early.
  • Firmware Updates: Keep the BMS firmware updated to the latest version to benefit from performance improvements and bug fixes. Check the official JIKONG website or app for updates.
  • Connection Integrity: Ensure all wiring connections (balance wires, main power cables, NTC sensor) are secure and free from corrosion. Loose connections can lead to inaccurate readings or system malfunctions.
  • Environmental Conditions: Operate the BMS within its specified temperature range. Avoid extreme heat or cold, which can affect performance and lifespan.
  • Physical Inspection: Occasionally inspect the BMS unit for any physical damage, such as cracks in the casing or damaged components. The aluminum alloy shell is designed for durability and heat dissipation.

6. Troubleshooting

If you encounter issues with your JIKONG BMS, consider the following basic troubleshooting steps:

  • No Power/Display: Check all main power connections (B- and P-). Ensure the battery pack is charged sufficiently.
  • Incorrect Readings: Verify that all balance wires are correctly connected to the cells and the sampling cable is securely plugged into the BMS. Check for any damaged wires.
  • Balancing Issues: If cells are not balancing, ensure the voltage difference is above the active balancing threshold. Check for any error codes or alarms in the app/software.
  • App Connection Problems: Ensure Bluetooth is enabled on your device and the BMS is powered on. Try restarting both the app and the BMS.
  • Over-protection Triggered: If the BMS frequently triggers overcharge, overdischarge, or overcurrent protection, review your battery parameters and load requirements. Adjust protection settings in the software if necessary, but always within safe limits for your battery chemistry.

For persistent issues, refer to the detailed troubleshooting guide available on the JIKONG website or contact customer support.

7. Specifications

The JIKONG JK-BD6A24S Series BMS offers various models with different current ratings and cell configurations. Below are general specifications and a detailed parameter table for specific models.

General Features:

  • Battery Type Compatibility: Li-ion, LiFePo4, LTO
  • Cell String Range: 8S-24S (varies by model)
  • Balance Function: Active Balanced BMS
  • Balance Current: 0.6A (typical, up to 1A-2A active balancing)
  • Charging Current: Up to 40A, 60A, 100A, 120A, 150A (varies by model)
  • Protection Functions: Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
  • Connectivity: Bluetooth, Display (optional external display), RS485, CAN, NTC, GPS (customized)
  • Shell Material: Full aluminum alloy for superior heat dissipation and environmental protection.
  • Certification: CE

Product Dimensions:

Dimensions of JIKONG BMS model JK-B1A8S10P.
Figure 11: Dimensions for JK-B1A8S10P: 105mm (width) x 153.9mm (length) x 17.6mm (height).
Dimensions of JIKONG BMS model JK-B2A8S20P.
Figure 12: Dimensions for JK-B2A8S20P: 126mm (width) x 153mm (length) x 17.6mm (height).
Dimensions of JIKONG BMS model JK-B2A8S30P.
Figure 13: Dimensions for JK-B2A8S30P: 127.26mm (width) x 174.77mm (length) x 17.6mm (height).

Detailed Product Specifications Table:

Table of JIKONG Product Specifications for various models.
Figure 14: JIKONG Product Specifications table, detailing parameters for JK-B1A8S1P, JK-B1A8S2P, JK-B2A8S20P, and JK-B2A8S30P models.

Note: The data tolerance range is ±2mm for dimensions. For customized services, please consult customer service.

8. User Tips

  • Always double-check wiring connections before powering on the system to prevent damage.
  • Utilize the mobile app for convenient real-time monitoring of your battery's health and performance.
  • For optimal balancing, allow the BMS sufficient time to equalize cell voltages, especially after initial setup or significant discharge/charge cycles.
  • Consider the application scenario (Power BMS, Energy Storage BMS, 3C Digital BMS) when selecting the appropriate BMS model for your needs.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact JIKONG customer service directly through their official website or the platform where the product was purchased. Keep your purchase records handy for any support requests.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.