1. Product Overview
This manual provides essential information for the safe and efficient operation of your RATTMMOTOR 4.5KW ER32 380V Air Cooled Spindle Motor and the accompanying 5.5KW Fuling Variable Frequency Drive (VFD). This system is designed for high-precision applications such as CNC routing, engraving, milling, and grinding across various materials including wood, aluminum, stone, metal, glass, and PVC.
The spindle motor features a robust stainless steel body, dustproof design, fan cooling, and four ceramic bearings for high precision and durability. The Fuling VFD offers advanced control capabilities for precise speed and torque management.
Figure 1: RATTMMOTOR 4.5KW ER32 380V Air Cooled Spindle Motor with Flange and wrench.
2. Specifications
2.1 Spindle Motor (Model: RTM120x103-4.5)
| Parameter | Value |
|---|---|
| Power | 4.5 KW |
| Voltage | 380VAC (±10%) |
| Current | 9A |
| Frequency | 0-300Hz |
| Speed | 10-18000rpm |
| Collet Size | ER32 |
| Bearings | 4 Ceramic bearings |
| Lubrication | Grease |
| Cooling | Air-cooled |
| Runout Off | Less than 0.01mm |
| Phase | 3 |
| Net Weight | 12.6 kg |
| Dimensions | 120x103x295mm |
| Material | Stainless Steel |
| Application | CNC Router, Engraving, Milling, Grinding (Wood, Aluminum, Stone, Metal, Glass, PVC) |
Figure 2: Spindle Motor Detailed Specifications.
Figure 3: Spindle Motor Dimensions Diagram.
2.2 Fuling Variable Frequency Drive (VFD)
| Parameter | Value |
|---|---|
| Brand | Fuling |
| Power | 5.5 KW |
| Rated Output Current | 23A |
| Output Voltage | 3-phase AC380V |
| Input Voltage | 3-phase AC380V |
| Frequency | 0-1000Hz |
| Control Mode | SPWM (Sine Wave PWM) |
| Features | Dust-resistant, suitable for constant and variable torque loads |
Figure 4: Fuling VFD Dimensions (approx. 250mm H x 154mm W x 155mm D).
3. Safety Precautions
WARNING: Improper use may result in serious injury or death. Always follow these instructions carefully.
CAUTION: Improper use may damage the inverter or mechanical system.
3.1 Before Power-up
- Verify that the main circuit AC power supply voltage matches the inverter's input voltage (380V).
- Ensure proper grounding for both the motor and the inverter.
- Do not install contactors between the power supply and the inverter if it is used for starting/stopping, as this can affect the inverter's service life.
- Avoid installing the inverter in areas with explosive gases.
- If operating above 1000m sea level, consider de-rating the inverter due to reduced cooling efficiency.
- Do not install capacitors or varistors on the output side of the inverter, as this can cause malfunctions or damage.
- Use an independent power supply for the inverter to avoid interference from other equipment.
3.2 During Power-up
- Do not plug or unplug connectors of the inverter during power-up to prevent surges to the main control board.
- Always ensure the protective cover is in place before power-up to prevent electrical shock.
3.3 During Operation
- Never connect or disconnect the motor while the inverter is running to prevent over-current trips or damage to the main circuit.
- Do not remove the front cover of the inverter while it is powered up.
- Be aware of the auto-restart function if enabled; ensure the area around the machine is clear.
- The STOP switch function is distinct from an emergency stop switch; understand its operation before use.
4. Setup Instructions
4.1 Installation Site and Environment
- Install the inverter in a location with good ventilation, ambient temperature between -5°C and 40°C.
- Ensure the location is free from water drops, high moisture, direct sunlight, heavy dust, corrosive gases or liquids, and excessive vibration (below 0.5G).
- Install the inverter vertically to ensure effective cooling.
- Mount the inverter on a metal or other non-combustible material.
- If installing multiple inverters in one cabinet, ensure adequate spacing and heat dissipation plates between them.
4.2 Wiring the Spindle Motor and VFD
Ensure all power is disconnected before performing any wiring. Incorrect wiring can cause severe damage to the equipment or pose a safety risk.
- Spindle Motor to VFD Connection:
- Spindle terminal 1 connects to Inverter's U terminal.
- Spindle terminal 2 connects to Inverter's V terminal.
- Spindle terminal 3 connects to Inverter's W terminal.
- Spindle's GND terminal connects to Earth Ground.
- Spindle's terminals 4 and 5 are for the thermistor (if applicable); no additional connector is needed for these.
- VFD Power Input: Connect any two pins of the VFD's R, S, T terminals to the 380VAC power supply.
Figure 5: Spindle Motor Aviation Plug Wiring Diagram. GND, 1, 2, 3 are main power connections. 4, 5 are for thermistor.
4.3 VFD Parameter Settings (Fuling Inverter)
The factory settings of the general-purpose inverter are adjusted by default and can be used directly with the spindle wiring. However, corresponding motor parameters can be set according to the actual situation.
- F005=400 (Highest operating frequency, set if rated power of motor is greater than 50Hz)
- F004=400 (Basic frequency of motor)
- F140=2.2 (Rated power of motor)
- F141=220V (Motor's rated voltage) - Note: This parameter might need adjustment to 380V based on your specific motor and VFD model, as the product title indicates 380V. Consult your VFD manual for precise 380V settings.
- F142=6.0 (Rated current of the motor)
- F143=02 (Number of motor stages, the store spindle is a 2-stage spindle)
- F144=24.00 (Rated speed of motor)
Figure 6: Fuling VFD Control Panel and Parameter Explanation.
5. Operating Instructions
5.1 Spindle Motor Operation
- Before starting, ensure the cooling water pipe is connected and the spindle is receiving cooling water.
- Manually rotate the spindle shaft before driving. If it feels stiff, troubleshoot the issue before proceeding.
- Verify the direction of rotation. From the spindle end, it should rotate counterclockwise. If not, adjust the power wiring to match.
- Ensure cooling water for the workpiece is not directed at the spindle cover to prevent damage to the bearings and motor. The motor must not get wet.
- Turn on workpiece coolant only after the motor is running and when grinding the workpiece. Turn off workpiece coolant before shutting down the spindle motor.
5.2 VFD Digital Operator
The VFD features a digital operator for displaying frequency, current, revolution, voltage, counter, temperature, and fault status. It allows for setting parameters and controlling the drive.
- PROGRAM/ESC: Entry or exit of the first level menu.
- FUNCTION/DATA: In the non-operation mode, press to display various status information. In operation mode, press to change the data.
- FORWARD/REVERSE: Selects forward or reverse rotation. Pressing this button decelerates the motor, then accelerates to the set frequency in the opposite direction.
- JOG: Press this button to execute the jog frequency command.
- RUN: Press to run the motor (if set to external terminal control, press this key is invalid).
- STOP/RESET: Stops the motor. If the inverter is interrupted due to a fault, press this button to reset after the fault has been eliminated.
- UP/DOWN arrows: Used to select parameter items or modify data.
Video 1: Demonstration of spindle motor and VFD operation, including wiring and parameter settings.
6. Maintenance and Service
- Ensure the medium frequency power supply's rated voltage and frequency are consistent with the electric spindle's technical parameters. Spindle rotational speed can be adjusted by changing the frequency, with voltage changing proportionally.
- When the spindle is not in use, use compressed air to blow out any coolant water to prevent rusting. Plug the holes and coat the spindle surface with anti-rust oil. Store the shaft end protecting device in a dry place.
- Bearing replacement should only be performed by professional and technical personnel using special tools. The stator coil should not be removed.
- Periodical Inspection: Regularly check for loose connections, abnormal noises, and proper cooling.
- Storage: If storing the inverter for a long time, power it up at least once a year for at least five hours. Increase voltage slowly with a regulator to the rated value. Store in a dry, dust-free place between -20°C and +65°C, with 0-95% relative humidity (non-condensing).
7. Troubleshooting
This section outlines common issues and their potential solutions. For complex problems, consult a qualified technician.
7.1 Fault Indication and Analysis (VFD)
The VFD's digital display will show error codes or status indicators for various faults. Refer to the VFD's detailed manual for a complete list of fault codes and their meanings.
7.2 Common Issues and Solutions
- Spindle not rotating smoothly: Manually check the spindle rotation before power-up. If stiff, identify and resolve mechanical obstruction.
- Incorrect rotation direction: Check spindle wiring (U, V, W terminals). If rotation is clockwise instead of counterclockwise (from spindle end), reverse two of the phase wires.
- Over-current trip: This can occur if the motor is connected/disconnected while the VFD is running, or due to incorrect VFD parameters. Ensure motor is stationary before connecting/disconnecting. Verify VFD parameter settings (e.g., F142 for rated current).
- Overheat: Ensure proper ventilation around the inverter and spindle. Check cooling fan operation. If multiple inverters are in an enclosure, ensure adequate spacing and heat dissipation.
- No display on VFD: Check power supply to the VFD. Ensure all connections are secure.
8. User Tips
Based on general best practices for CNC equipment:
- Always double-check all wiring connections before applying power to prevent damage.
- Regularly clean the spindle and VFD to prevent dust accumulation, which can lead to overheating and reduced lifespan.
- Familiarize yourself with the VFD's digital operator and common parameter settings to optimize performance for different materials and tasks.
- Keep a log of VFD parameter changes, especially if experimenting with settings, to easily revert to known good configurations.
- Ensure adequate safety gear (e.g., eye protection) is used when operating CNC machinery.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original vendor or the manufacturer directly. Ensure you have your product model number (RTM120x103-4.5) and any relevant purchase details available when seeking support.
The manufacturer provides an instruction manual (PDF) for detailed guidance, which can be referenced for further information on specific functions and advanced settings. The manual is subject to change without notice.
Note: This manual is a general guide. Always refer to the specific documentation provided with your product for the most accurate and up-to-date information.