1. Introduction
Thank you for choosing the GEYA LCD Digital Power Meter. This intelligent device is designed to help you monitor and manage your electricity consumption effectively. It features a rotatable display, multiple measurement functions, and programmable timing controls. Please read this manual carefully before use to ensure safe and optimal operation.

2. Product Overview
The GEYA LCD Digital Power Meter is a multi-functional socket that automatically calculates electricity bills and measures power consumption, voltage, current, and timing of connected appliances. It features a high-definition liquid crystal display for clear readings and a safe European standard socket design.

1. Liquid crystal display screen (adjustable by 45 degrees)
2. Mode key
3. Adjustment button (UP)
4. Reset button
5. European plug
6. European standard socket

Liquid crystal display: High-definition display with clear numerical values.
Safe socket: Prevents accidental insertion with a safety protection door, equivalent to a 7.5KG pressure.
European plug: Nickel plating treatment for anti-copper rust and low heat.
3. Setup
3.1 First Time Charging
This timer contains a rechargeable battery. If the screen does not turn on or displays garbled characters, it may be due to the battery running out of charge from prolonged storage. In this case:
- Simply plug the timer into a power outlet.
- The charging time should take at least 30 minutes.
- If the screen still doesn't light up or displays garbled characters after charging, simply reboot the system by pressing the "RESET" button.
3.2 Plug and Play
The device is designed for easy use. Simply plug it into a wall socket, then plug your electrical appliance into the meter's socket. Measurement will begin immediately.

4. Operating Instructions

4.1 Key Usage Instructions
- MODE button: Mode switching button and displays current status.
- UP button: Sets data and price.
- RESET button: Resolves data disorder and other errors, resets to factory settings.
4.2 Product Functions
- Display the line power.
- Display and store the cumulative electricity consumption.
- Display and store the price of the total electricity charge.
4.3 Data Display Modes
When the MODE button is pressed, the display will cycle through the following information:
- W (power)
- KWH (kilowatt-hours)
- PRICE (price)
- COST/KWH (cost per kilowatt-hour)
To view data:
- Insert the plug, connect the power supply, and the instrument will display the actual power.
- Press and release the MODE key again, and the electricity meter will display the cumulative kilowatt-hours.
- Press and release the MODE key again, and the instrument will display the total electricity.
- Press and release the MODE key again, and the instrument will display COST/KWH.
4.4 Setting Cost/KWH Price
- Press the MODE and UP buttons simultaneously when displaying the cost/KWH. The first digit of the cost/KWH flashes.
- Press the UP button to make the setting.
- Press the MODE key again and release it. The second digit "Cost/KWH" flashes.
- Press the UP button to make the setting.
- Repeat for the third and fourth digits.
- Press the MODE key to confirm all data settings.
4.5 Clear Data
Press and hold the MODE button for 5 seconds to clear the KWH, PRICE, and Cost/KWH data.
4.6 Manual Control
Displayed features:
- ON: Socket turns on.
- OFF: Socket turns off.
- AUTO: Socket turns on/off automatically via timer.
Manual ON setting:
- Press the "I/O" button to switch from "AUTO" to "ON". This mode allows the device's socket to power up. The power indicator will light up.
Manual OFF setting:
- Press the "ON/AUTO/OFF" button to switch from "AUTO" to "OFF". This mode turns the device's socket off. Power indicators will turn off.
4.7 Timing Settings
To enter the timing setting interface:
- Press the "P/+" button.
- Select and set the timer. Setting rotation: 1 on, 1 off, 2 on, 2 off, ..., 10 on, 10 off (or optional with up to 18 on, 18 off).
- Press the "RND/-" button to return to the last interface.
- Press the "SET/CLK" button to set the hour, minute, and week.
- Press the "P/+" or "RND/-" button again to adjust the data of hour, minute, and week.
- Press the "SET/CLK" button again to confirm and exit the setting interface.
To cancel a selected ON or OFF timer:
- Press the "I/O" button. The screen will show "------", indicating the timer is canceled.
- Press the "I/O" button again to reactivate the timer.
To exit the timer and return to the clock display immediately:
- Long press the "SET/CLK" button.
4.8 Random Function
The random function allows the timer to activate within a randomized delay, useful for simulating occupancy.
- Press the "RND/-" button to activate the random function. Press again to cancel.
- The system only runs the random function when "AUTO" is on.
- The random function will automatically start the timer from 18:00 to 6:00 after the setting.
- In this time range, the program timing setting will be randomly delayed by 1 to 32 minutes.
- If the time range of the timing setting is more than 18:00 ~ 6:00, the timing switch will be on time without the random function.
4.9 Countdown Mode
The countdown mode allows you to set a specific duration after which the device will turn on or off.
- Press "P/+" and "RND/-" both for nearly 1 second to enter the Countdown Mode.
- Press the "SET/CLK" button to select and set the hour, minute, and second.
- Press the "P +" button or the "RND -" button to adjust the data of the hour, minute, and second.
- Press the "SET/CLK" button to confirm and exit the setting.
- During countdown time working, press the "I/O" button to start or stop the countdown.
- Long press the "SET/CLK" button to return to the clock display and stop the countdown.
4.10 Setting Daylight Saving Time (DST)
To set daylight saving time:
- Long press the "P/+" button to set daylight saving time (clock hours plus 1 hour).
- Press the "P/+" button again to cancel daylight saving time (reduce 1 hour).
5. Specifications

Product Information Table:
| Attribute | Value |
|---|---|
| Product Name | Digital energy meter |
| Product Model | GSW6-TC02-EU (HLP02) |
| Power Supply | 230V-50Hz |
| Load | 16A/3680W |
| Power Accuracy | +/-2% |
| Battery Accuracy | +/-2% |
| Minimum Power Display | 0.3W |
| Minimum Power Quantity Display | 0.01KWH |
| Cumulative Power Range | 0.00 - 9999.9 KWH |
| Price Range | 0.00 - 9999 |
| Operating Voltage | 230VAC |
| Battery | NiMh 1.2V |
| Power Consumption | < 0.8W |
| Response Time | 1 minute |
| Max. Power Output | 3680W |
| Working Temperature | -10°C ~ 40°C |
| Certification | CE |
6. Maintenance
6.1 Cleaning
If cleaning of the meter is required, always remove it from the mains power supply first. Wipe the meter with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
6.2 Storage
Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
7. Troubleshooting & Safety Warnings
7.1 Common Issues
- Screen not lighting up or displaying garbled characters: This usually indicates a low battery. Plug the meter into a power outlet for at least 30 minutes. If the issue persists, press the "RESET" button to reboot the system.
7.2 Safety Warnings
- Do not plug two or more meters together! This can create a hazardous overload condition.
- Do not plug in an appliance where the load exceeds 16 Amp (3680W). Always ensure the connected appliance's power consumption is within the meter's limits.
- Always ensure the plug of any appliance is fully inserted into the meter outlet.
- The socket has a safety door to prevent children from mistakenly inserting objects, but adult supervision is always recommended.
8. User Tips
- Utilize the 45° adjustable LCD screen for optimal viewing comfort from various angles.
- Regularly check the cumulative power range to track long-term energy consumption for specific appliances.
- The random function can be useful for home security when you are away, by making it appear as if someone is home.
- For detailed information and advanced settings, refer to the official user manual PDF.
9. Warranty & Support
For detailed warranty information, technical support, or further inquiries, please refer to the official GEYA website or contact your retailer.
An electronic version of the user manual is available for download: