Hippcron Car Remote Control Keyless Entry Start System

1. Introduction

Thank you for choosing the Hippcron Car Remote Control Keyless Entry Start System. This system provides a convenient and secure way to control your vehicle's locking, unlocking, engine start/stop, window closing, and trunk release functions. Designed for universal compatibility with 12V cars, it enhances your driving experience with modern features.

This manual provides detailed instructions for the installation, operation, and maintenance of your new keyless entry and start system. Please read it thoroughly before installation and use to ensure proper function and safety.

2. Important Safety Warnings

• Professional Installation Recommended: The installation of this system involves complex wiring and integration with your vehicle's electrical system. It is strongly recommended that installation be performed by a qualified technician at a 4S automobile store or a formal automobile repair shop, rather than attempting it yourself. Improper installation can lead to vehicle damage or malfunction.
• Battery Requirement: Due to customs regulations, products shipped from China do not include batteries. You will need to purchase CR2026 batteries separately. Each remote controller requires two (2) CR2026 batteries, totaling four (4) batteries for a complete kit.
• Power Window Closer: The automatic window closing function only works if your car is originally equipped with a power window closer system.
• Trunk Motor: The remote trunk opening function requires your car to have an original trunk motor installed.
• Sunroof Compatibility: The rising power window feature is not applicable to sunroofs.

3. Package Contents

Please check the package to ensure all items are present:

• 1 x Control Box
• 2 x Remote Controllers (with blank keys)
• 1 x Engine Start/Stop Button
• 1 x LED Connection Wire
• 1 x Main Wire Harness
• 1 x Operation Instruction Manual (XY-Q658)

4. Specifications

5. Installation (Professional Installation Recommended)

As noted in the safety warnings, professional installation is highly recommended for this product. The following information provides an overview of the wiring connections. Refer to the included 'Operation Instruction Manual (XY-Q658)' for complete and detailed installation steps.

5.1. Wiring Diagram Overview

The diagram illustrates the connections for the Start Switch, the 10-pin connector, and integration with the original central door lock system. Key connections include:

Start Switch (6-Pin Connector):

• Brown Wire: Connects to Ignition2 output (power supply interrupted during starting).
• Yellow Wire: Connects to Starter output.
• Blue Wire: Connects to ACC accessory.
• Black Wire: Connects to Ground (-).
• White Wire: Connects to Ignition1 output.
• Red Wire: Connects to +12V Power.

10-Pin Connector:

• Black: (+) Foot brake Input.
• Blue/Black: Power Windows Output (-25S).
• Purple: Trunk Release (-12V).
• White: (+).
• Yellow/Black.
• Black/White.
• Orange/White.
• Orange/Gray.
• Yellow/Green.
• Green/Gray.

Important Note for Remote Functions: To enable parking lights flashing and siren sounds upon remote lock/unlock, the 7th pin of the main harness needs to be connected to your car's horn and parking lights circuit. Refer to the detailed user manual for specific wiring instructions for your vehicle's central door lock system (Electronic or Pneumatic).

5.2. Battery Installation for Remote Controllers

Each remote controller requires two CR2026 batteries. To install:

1. Carefully open the remote controller casing.
2. Insert two CR2026 batteries, ensuring correct polarity (+/-).
3. Close the casing securely.

6. Operation

6.1. Engine Start/Stop (One-Key Start)

• To Start Engine: Press the 'ENGINE START STOP' button. The system will initiate the engine.
• To Stop Engine: Press the 'ENGINE START STOP' button again.

6.2. Remote Lock and Unlock

• To Lock: Press the lock button on the remote controller. The car doors will lock, parking lights will flash, and the siren will sound (if connected).
• To Unlock: Press the unlock button on the remote controller. The car doors will unlock, parking lights will flash, and the siren will sound (if connected).
• Remote Car Location: Pressing the lock/unlock button can also help you locate your car in a parking lot by activating the lights and siren.

6.3. Remote Trunk Release

• To Open Trunk: Long-press the unlock button on the remote controller for approximately 5 seconds. The trunk will open (requires an existing trunk motor in the car).

6.4. Automatic Window Closing

• After Door Locking: Windows will automatically close approximately 25 seconds after the car doors are locked.
• Via Remote: Windows will also close automatically after pressing the Key Lock Button on the remote.

Note: This feature is only available for cars equipped with an original power window closer. It does not apply to sunroofs.

6.5. Extreme Weather Operation

The system is designed for normal operation between -50°C and 80°C, featuring high-temperature protection for electronic components.

• Cold Weather Engine Start: In extreme cold, hold the start button for 3 seconds. The system will attempt to start the engine up to three times, checking the fuel pump for ignition.

7. Maintenance

• Battery Replacement: Replace the CR2026 batteries in your remote controllers when the range decreases or the LED indicator dims.
• Cleaning: Keep the control box and remote controllers clean and dry. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive materials.
• Avoid Water Exposure: While the system is designed for automotive use, avoid direct exposure of the control box and remote controllers to excessive moisture or water.
• Professional Checks: It is advisable to have your vehicle's electrical system, including the keyless entry system, checked periodically by a qualified technician.

8. Troubleshooting

• System Not Responding:
  • Check the batteries in your remote controllers and replace if necessary.
  • Ensure the vehicle's main battery is charged and functioning correctly.
  • Verify all wiring connections are secure (professional inspection recommended).
• Reduced Remote Range:
  • Replace remote controller batteries.
  • Ensure there are no strong electromagnetic interferences in the area.
• Automatic Window Closing Not Working:
  • Confirm your vehicle has an original power window closer system.
  • Check the wiring connection for the power windows output (Blue/Black wire).
• Remote Trunk Release Not Working:
  • Confirm your vehicle has an original trunk motor.
  • Check the wiring connection for the trunk release (Purple wire).

For persistent issues, please consult a professional automotive technician or contact customer support.

9. User Tips

• Always carry a spare set of CR2026 batteries for your remote controllers, especially on long trips.
• Familiarize yourself with the remote control's range in different environments to avoid accidental locking/unlocking or starting.
• Ensure your car is in a safe, well-ventilated area before using the remote start function.

10. Warranty and Support

Your Hippcron Car Remote Control Keyless Entry Start System is designed for reliability and performance. For any issues or support needs, please refer to the following information:

• Returns: Free returns are available within 90 days of purchase.
• Delivery Guarantee: In case of delayed delivery, a coupon code may be provided. Refunds are available if the package is lost or items are damaged during transit, or if no delivery occurs within 30 days.
• Security & Privacy: Your personal details are protected and not shared with third parties without your consent.

For further assistance, please contact your retailer or the manufacturer's customer service as indicated in your purchase documentation.

A digital version of the user manual (PDF) is available for download from the product page or by contacting customer support.