1. Product Information
This manual provides instructions for the Kailh Purple Iris Switch, a silent linear low-profile quick trigger switch designed for mechanical keyboards.
- Product Name: Keyboard Switch
- Model: CPG1353D01D01-40 (Mechanical keyboard Hot-swappable shaft seat switch)
Manufacturer & EU Representative Information
- Manufacturer: Dongguan Electronics Co., Ltd.
- Manufacturer Address: No. 1A, Lin Dong 2nd Road, Lincun, Tangxia Town, Dongguan City
- Manufacturer Contact: 1426919867@qq.com
- EU Authorized Representative: MJCM SARL
- EU Representative Address: 78 avenue des Champs Elysees Bureau 326
- EU Representative Contact: mjcm190928@gmail.com
For a detailed item guide and documents, please refer to the official user manual PDF: Kailh Purple Iris Switch User Manual (PDF).
2. Safety & Warnings
Warning: It contains small parts that children may accidentally swallow. Children under 3 years old should not use it. Be cautious of the risk of suffocation.
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Choking Hazard: Small parts. Not for children under 3 years.
- Power Disconnection: Always disconnect power before installing or removing switches to avoid short circuits.
- ESD Sensitive: This is an ESD sensitive device. Discharge static electricity before handling.
- Do Not Disassemble: Do not disassemble the switch; springs and parts may eject and cause injury.
- Not Waterproof: Keep away from liquids to prevent electric shock.
- Age Restriction: For use by persons 14 years of age or older. Children require adult supervision.
- Disposal: Dispose of electronic waste according to local regulations.
- General Safety: Keep the device and its cord out of reach of children under 3 years old. Do not use this product for purposes other than its intended use. Inspect the product before each use; do not use if damaged. Follow installation and operation guidelines to avoid injury. Do not expose to water or moisture. Handle with care to avoid cuts or injuries.
3. Setup & Installation
III. Installation Preparation
- Tools: Axle extraction tool (axle remover), dry soft cloth, anti-static wrist strap (optional).
- Environment: A dry, dust-free, and liquid-free area. Avoid static electricity and debris from falling into the keyboard.
- Inspection: Ensure that the pins of the key shaft are intact and undamaged; disconnect the keyboard from power supply and remove the USB/wireless receiver.
IV. Installation Steps
- Determine the correct position: Align the shaft with the keyboard shaft socket, ensuring that all four corners of the shaft are perfectly aligned with the positioning plate, and the pins are vertically aligned with the socket holes of the shaft socket, without any inclination.
- Smooth insertion: Grasp both sides of the shaft with your hands and apply even force to press it down. You will hear a "click" sound. Once the shaft is fully inserted into the positioning plate and the pins are inserted into the shaft seat, it indicates that the installation is complete.
- Power-on test: Connect the keyboard, press the key mechanism, and confirm that the key activation is normal, without any lag or consecutive clicks.
- Install key caps: After confirming that the key mechanism is functioning properly, attach the corresponding key caps and gently press them into place.
4. Disassembly
V. Disassembly Steps
- Keep the keyboard powered off. First, remove the keycaps.
- Insert the spliner into the shaft and secure the bottom of the shaft.
- Pull up vertically with even force. Do not shake left or right or force the operation. Avoid damaging the shaft seat and the PCB.
- Remove the shaft, and if there are no abnormalities in the shaft seat, you can reinstall it.
5. Important Notes & Maintenance
VI. Important Notes
- Installation and disassembly must be carried out with power off. It is strictly prohibited to hot-plug or hot-unplug while powered on to avoid short circuits and damage to the circuit.
- The pins of the shaft are fragile. Do not bend or forcefully insert them. Any deviation will result in failure to trigger or damage to the shaft base.
- Do not press the shaft body's axis center forcefully to avoid damaging the internal structure.
- Keep away from liquids, dust and high temperatures. Do not disassemble the shaft by yourself; otherwise, the normal operation guarantee will be lost.
- If the buttons do not respond or there are consecutive failures, remove and reinsert the keycap. Check if the pins are deformed or if there are any foreign objects in the keycap socket.
6. Troubleshooting
VII. Common Questions
- Buttons do not respond: Check if the key mechanism is fully inserted, if the pins are aligned and inserted all the way in, and if the power is turned off before operating.
- Pressing issue: Ensure that the key mechanism is installed properly and there are no foreign objects entering the shaft structure.
- Unreparable (for removal): Do not forcefully pull out. Instead, use the extraction tool to firmly clamp it and then exert vertical and smooth force.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Kailh |
| Axis Body Brand | Kailh Purple Iris Switch Silent Linear Low Profile Quick Trigger |
| Model | CPG1353D01D01-40 |
| Style | Standard |
| Interface Type | USB |
| Battery Included | No |
| Operation Style | Mechanical |
| Language | English |
| Keyboard Standard | 104 Keys |
| Application | Desktop |
| Type | Wired |
| Origin | Mainland China |
| Trigger Force | 30 ± 10gf |
| Trigger Stroke | 0.8 ± 0.30mm |
| Resilience | 10gf min |
| Full Stroke | 1.8 +0.4/-0mm |
| Mechanical Lifespan | 50 million cycles |
| Decibel | 25dB |
| Package Length | 18 cm |
| Package Width | 8 cm |
| Package Height | 24 cm |
| Package Weight | 0.2 kg |
8. User Tips
No specific user tips were available from the provided data. Always refer to the installation and troubleshooting sections for best practices.
9. Compliance Information
This product complies with international environmental protection regulations:
- RoHS (European Union): Restricts the use of six harmful substances such as lead, mercury, and cadmium.
- REACH (European Union): Regulates substances of very high concern (SVHC).
- WEEE (European Union): Requirements for the Recycling and Disposal of Electronic Waste.