1. Product Overview
The JGINYUE X79M-G ARGB is a high-performance M-ATX motherboard designed for Intel Xeon E Series CPUs (LGA 2011 socket). It features 4 DDR3 memory slots, an M.2 NVMe slot, and ARGB lighting support, making it suitable for gaming, audio/video editing, and office applications.


2. Setup and Installation
2.1 Required Components
- JGINYUE X79M-G ARGB Motherboard
- Intel Xeon E Series CPU (LGA 2011 socket)
- DDR3 RAM modules (up to 128GB, dual channel)
- CPU Cooler (compatible with LGA 2011)
- Graphics Card (PCIe 3.0 x16)
- Storage Devices (M.2 NVMe SSD, SATA SSD/HDD)
- Power Supply Unit (ATX compatible)
- PC Case
2.2 Motherboard Layout

2.3 Installation Steps
- CPU Installation: Carefully open the LGA 2011 socket lever, align the CPU with the triangular mark on the socket, and gently place it in. Close the lever to secure the CPU.
- CPU Cooler Installation: Install your LGA 2011 compatible CPU cooler. The motherboard includes a kit for easy adaptation of a CPU cooler.
- RAM Installation: Insert DDR3 RAM modules into the four available slots. For optimal performance, install modules in pairs for dual-channel operation.
- M.2 SSD Installation: Locate the M.2 slot (supports 2280 form factor). Insert the M.2 SSD at an angle and secure it with the provided screw. The M.2 slot is positioned behind the GPU slot.
- SATA Device Installation: Connect SATA SSDs or HDDs to the 4 SATA 2.0 ports using SATA cables.
- PCIe Card Installation: Install your graphics card into the PCIe 3.0 x16 slot. Additional expansion cards can be installed in the PCIe x1 or PCI slots.
- Power Connections: Connect the 24-pin ATX power connector and the 8-pin CPU power connector from your PSU to the motherboard.
- Front Panel Connections: Connect your PC case's front panel connectors (USB, audio, power switch, reset switch, power LED, HDD LED) to the corresponding headers on the motherboard.
- ARGB Connections: Connect 5V 3-pin ARGB devices to the two available ARGB headers on the motherboard for synchronized lighting effects.
- Rear I/O Panel: Connect peripherals such as keyboard, mouse, monitor, and network cable to the rear I/O ports.

2.4 TPM 2.0 Interface
The motherboard features a TPM2.0 interface, which is compatible with MSI TPM modules (14-pin configuration). This allows for Windows 11 compatibility and enhanced security features like Secure Boot.

3. Operating Instructions
3.1 BIOS/UEFI Setup
To access the BIOS/UEFI setup utility (Aptio Setup Utility), press the designated key (usually DEL or F2) during system startup. Here you can configure various system settings.

3.2 CPU Power Management
Within the BIOS, navigate to the CPU Power Management Configuration to adjust settings such as Power Technology, EIST, Turbo Mode, and P-STATE Coordination. Note that CPU power may be hard-limited in the BIOS (e.g., below 90W) to maintain VRM temperatures.

3.3 ARGB Software
For controlling the motherboard's ARGB lighting, download the official ARGB software from the JGINYUE website: https://www.jginyue.com.cn/public/upload/22/cc49792bbd5b95f74f59c9183d89cd.rar
4. Maintenance
To ensure the longevity and optimal performance of your motherboard, regular maintenance is recommended:
- Cleaning: Periodically clean dust from the motherboard and components using compressed air. Ensure the system is powered off and unplugged before cleaning.
- BIOS Updates: Check the official JGINYUE website for the latest BIOS updates. Updating the BIOS can improve stability, compatibility, and performance. Follow the instructions provided with the BIOS update carefully.
5. Troubleshooting
5.1 Common Issues
- No Power/No Boot: Double-check all power connections (24-pin ATX, 8-pin CPU). Ensure the PSU is switched on.
- No Display: Verify that the graphics card is properly seated and connected to the monitor. If using a TPM 2.0 module, ensure CSM (Compatibility Support Module) is configured correctly in BIOS; sometimes it needs to be turned off to enable Secure Boot, which can affect GPU image output.
- System Instability: Check RAM seating and compatibility. Ensure CPU cooler is properly installed and making good contact.
- Coil Whine: Some users have reported coil whine, which may be resolved by adjusting BIOS settings.
5.2 Further Assistance
For other issues or advanced troubleshooting, please refer to the email address provided below the barcode on the motherboard packaging for direct support.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | JGINYUE |
| Model | X79M-G ARGB |
| Socket Type | LGA 2011 |
| Processor Compatibility | Intel Xeon E Series |
| Chipset Manufacturer | Intel |
| Chipset | Intel X79 |
| Application | Desktop, Server |
| Usage Scenario | Gaming, Audio & Video, Office |
| Support Memory Type | DDR3 |
| Number Of Memory Slots | 4 |
| Maximum Ram Capacity | 128 GB |
| Memory Channel | Double |
| Storage Interface Type | SATA 2, SATA 3, M.2 (NVMe) |
| Number of SATA Ports | 4 |
| Supports M.2 SSD | 2280 |
| Number of M.2 | 1 |
| PCI - E standards | PCI-E 3.0 |
| Number of PCIe x 16 | 1 |
| Number of PCIe x 1 | 1 |
| Number of PCI | 2 |
| Onboard LAN | 1x RJ45 |
| Audio Channels | 5.1 |
| Back I/O Ports | 1x RJ45, 6 x USB 2.0, Function Button, Display Port |
| Special Features | RGB, Cooling Armor |
| Quality Certification | CE, ROHS |
| Package | Yes |
| With CPU | No |
| Battery Included | No |
| RAID Supported | No |
| High-concerned chemical | None |
| Origin | Mainland China |
7. User Tips
- The motherboard performs well with Intel Xeon E5 2667v2 CPUs, maintaining stable operation and boosting to full turbo speeds (e.g., 4GHz).
- It supports advanced features like Above 4G Decoding and Resizable BAR, which can enhance graphics performance.
- The motherboard has a single 3-pin fan header for case fans and a 4-pin PWM controllable header for the CPU cooler.
- For TPM 2.0 functionality, an MSI 14-pin TPM module is recommended. Remember to adjust CSM settings in the BIOS for proper TPM and Secure Boot operation. You may need to enable CSM initially for GPU image, then disable it for Secure Boot.
- The M.2 NVMe slot is conveniently located behind the GPU slot, which can improve cable management and airflow.
- DDR3 memory modules from standard PCs (not just server memory) at speeds like 1866MHz work perfectly.
- The package often includes useful accessories such as a CPU cooler adaptation kit, a SATA cable, a backplate, and a TPM 2.0 chip, making it ready for Windows 11.
- While the motherboard primarily features USB 2.0 ports, this is generally not an issue for most peripherals.
- The VRM heatsink remains cool even under benchmarking loads, indicating efficient power delivery and cooling design.
- ARGB lighting is compatible with OpenRGB software for customization.
8. Warranty and Support
For warranty information and technical support, please refer to the contact details provided on the motherboard packaging. You can also find additional guides and documents, including a PDF user manual, at the following link: View User Manual (PDF).