Introduction
The Leclstar Wake Up Light Sound Machine (Model: PG30) is a versatile bedside essential designed to enhance your sleep and wake-up experience. It combines a sunrise alarm, sound machine, dimmable night light, and ambient lighting into one device. This manual provides detailed instructions to help you get the most out of your product.

Safety Information
WARNING: Ingestion Hazard (Button Cell Battery)
- This product contains a button cell or coin battery.
- Death or serious injury can occur if ingested.
- A swallowed button cell or coin battery can cause internal chemical burns in as little as 2 hours.
- KEEP new and used batteries OUT OF REACH of CHILDREN.
- Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
General Battery Safety
- The product contains non-replaceable button batteries (CR2032, 3V).
- Remove and immediately recycle or dispose of used batteries in accordance with local regulations. Keep out of reach of children. Do not discard batteries in household garbage or incinerate.
- Even used batteries can cause serious injury or death. Call your local poison control center for treatment information.
- Non-rechargeable batteries shall not be charged.
- Do not force discharge, charge, disassemble, heat above manufacturer-specified rated temperature, or incinerate. Otherwise, injury may occur due to venting, leakage, or explosion, resulting in chemical burns.
General Product Warnings
- Not suitable for children under 3 years.
- Choking hazard - Contains small parts.
- No scratching, poking, throwing, or disassembling.
- Avoid water, fire, and flammables.
- Parental supervision required.
Setup
Before first use, ensure the device is properly connected to power. The clock functions only when connected to a power source.
1. Initial Power Connection
Connect the provided Type-C charging cable to the device and a power adapter. Plug the adapter into a wall outlet. The display should illuminate.
2. Setting the Time
- Hold the SET button (often combined with SNOOZE or +/-) for 3 seconds to enter time setting mode.
- Rotate the SET+/- dial to select the 12/24-hour format, then adjust the hour and minute.
- Press the SET button to confirm each setting.
3. Setting the Alarm Clock
- Press the Alarm Clock button (often indicated by an alarm icon) to turn the alarm on/off.
- Hold the Alarm Clock button for 3 seconds to enter alarm setting mode.
- Rotate the SET+/- dial to adjust the alarm time (hour and minute), sound (S01-S07 or OFF), volume (U0-U16), and sunrise light duration (0-10-20-30-40-50-60 minutes or OFF).
- Press the SET button to confirm each setting.

Operating Instructions
1. Light Functions (Night Light / Bedside Lamp)
- Turn On/Off: Press the Light button (often indicated by a light bulb icon) to turn on the night light or switch between light colors (C01-C12 for ambient light). Hold for 3 seconds to turn off the night light.
- Adjust Brightness: Rotate the SET+/- dial to adjust the brightness of the light (L1-L20).
2. Sunrise Alarm
The sunrise alarm simulates a natural sunrise, gradually increasing light intensity over a set period (10-60 minutes) before your chosen alarm time. This feature is configured during the alarm clock setup.

3. Sound Machine (White Noise & Natural Sounds)
- Turn On/Select Sound: Press the Music Note button to turn on or select a white noise sound (S01-S30) or natural sound.
- Adjust Volume: Scroll the Volume dial up or down to adjust the sound volume (U0-U16).
- Turn Off: Hold the Music Note button for 3 seconds to turn off the white noise/sound.

4. Snooze Function
- When the alarm sounds, press the SNOOZE button to activate snooze. Each snooze lasts 9 minutes, and you can snooze without limits.
- To turn off the alarm completely, press any other button (e.g., Alarm Clock button). If no button is pressed, the alarm will automatically turn off after 30 minutes.
5. Sleep Timer
- Press the Timer button (often indicated by an hourglass icon) to turn on or select a sleep timer duration (15/30/60/90/120/180 minutes).
- Hold the Timer button for 3 seconds to turn off the sleep timer.

6. Time Display Brightness
Scroll the SET+/- dial up or down to adjust the brightness of the time display.
7. Ambient Light (RGB)
- Press the Light button to cycle through 12 RGB ambient light colors (C01-C12).
- Rotate the SET+/- dial to adjust the brightness of the ambient light (L1-L20).
- Press and hold the Light button for 3 seconds to turn off the ambient lights.

Maintenance
Cleaning
To clean the device, wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water. Ensure the device is unplugged before cleaning.
Storage
When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
- Device not powering on: Ensure the Type-C cable is securely connected to both the device and the power adapter, and the adapter is plugged into a working wall outlet.
- Alarm not sounding: Check if the alarm is enabled and the volume is not set to U0 (mute). Verify the alarm time is correctly set.
- Lights not working: Ensure the light function is turned on and brightness is adjusted above L0.
- Buttons unresponsive: Try unplugging the device for a few seconds and then plugging it back in to perform a soft reset.
If you encounter persistent issues not covered here, please contact customer service.
Specifications
| Feature | Detail |
|---|---|
| Model Number | PG30 (also referred to as BL50) |
| Brand Name | Leclstar |
| Item Type | Night Lights |
| Type | Night Light |
| Power Source | DC |
| Voltage | 5V |
| Wattage | 0-5W |
| Light Source | LED bulbs (included) |
| Body Material | ABS |
| Shape | Round |
| Power Generation | Switch |
| Luminous Flux | <60 |
| Certification | CE, RoHs |
| Is Smart Device | No |
| Internal Battery Type | CR2032 (non-replaceable) |
| Internal Battery Voltage | 3V |
| Product Dimensions (L x W x H) | 17 cm x 15 cm x 8 cm |
| Product Weight | 0.414 kg |
| Origin | Mainland China |
User Tips
- Explore Sounds and Lights: Many users find the variety of sounds and lights pleasant and effective. Experiment with different settings to find what works best for your sleep and wake-up routine.
- Continuous Power: Remember that the clock and most functions require continuous power connection. It does not operate on its internal button battery for daily use.
- Simple Operation: The device is designed with simple operating instructions. Take a moment to familiarize yourself with the buttons and dials for a smooth experience.
Warranty & Support
For any questions or concerns regarding your Leclstar Wake Up Light Sound Machine, please contact our customer service team. The seller of this item is the Leclstar Official Store.
A digital version of this user manual (PDF) is available for download: User Manual (PDF)