BONROAD Wireless CarPlay Android Auto Adapter

Contents

BONROAD Wireless CarPlay Android Auto Adapter User Manual

For BMW 3 & 5 Series E60, E61, E62, E63, E90, E91, E92, E93, E87, E82, E81, E84 CCC/CIC Systems

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your BONROAD Wireless CarPlay Android Auto Adapter. Please read this manual thoroughly before installation and use to ensure proper function and to avoid damage.

BONROAD Wireless CarPlay Android Auto Adapter main unit and in-car display
Figure 1: BONROAD Wireless CarPlay Android Auto Adapter and its interface in a BMW dashboard.

Compatibility

This adapter is designed for specific BMW models and infotainment systems. Please verify your vehicle's system type before installation.

Compatible BMW Models & Systems:

  • BMW 3 Series E90 CCC/CIC (2006-2010)
  • BMW 5 Series E60 CCC/CIC/Mask (2006-2010)
  • BMW E60, E61, E62, E63, E64, E90, E91, E92, E93 CCC/CIC system
  • BMW E70, E71 CCC/CIC system
  • BMW E81, E82, E87, E88 CCC/CIC system
  • BMW E84, F10, F25, F01, F02, GT F07 CIC system
BMW CCC system with 10-pin LVDS plug and CIC system with 4-pin LVDS plug
Figure 2: Identifying your BMW system by LVDS plug type. CCC systems use a 10-pin LVDS plug, while CIC systems use a 4-pin LVDS plug.

Setup and Installation

Installation is generally plug-and-play, but requires careful connection of cables. A detailed PDF user manual is available for download from the seller or can be referenced here.

Installation Diagram:

BMW CCC CP/AA Installation Diagram showing connections for LVDS, USB, MIC, Power, Head Unit, and 48PIN Harness
Figure 3: Wiring diagram for the BONROAD Wireless CarPlay/Android Auto adapter in BMW CCC systems.

Wiring Connections:

  1. Main Unit Connections:
    • LVDS OUT: Connect to the LVDS cable going to the car's display.
    • LVDS IN: Connect to the LVDS cable coming from the head unit.
    • USB: For wire connection (e.g., wired CarPlay/Android Auto, USB media).
    • MIC: For extra microphone input.
    • Power: Connect to the power harness.
  2. 48PIN Harness Connections:
    • Yellow: B+ (Battery Positive)
    • Red: ACC (Accessory Power)
    • Black: GND (Ground)
    • Blue: Rear-Camera 12V (Power for rear camera)
    • Brown: Reverse detection
  3. Special Connections:
    • White: 360-TX (Connecting to 360 Universal Box TXD)
    • White & Black: 360-RX (Connecting to 360 Universal Box RXD)
    • REAR-CVBS: Rear view camera or 360AHD output
    • FRONT-CVBS: Front view camera
    • AUX: Audio Out Port

CCC DIP Settings:

Adjust the DIP switches on the adapter according to your vehicle's configuration and desired resolution.

1237Car8
OFFOFFOFFknob without damper (1)
ONOFFOFF\knob without damper (2)
OFFONOFF\knob with damper
456Resolution
OFFOFF/400*240
OFFON/640*240
ONOFF/N/A
ONONN/A

Important Installation Notes:

  • If your original car system does not have AUX input, you may need to activate the original AUX function.
  • Some car models might require plugging in an AMI cable for audio.
  • Before switching to the adapter's system, ensure you select 'AUX external' as the audio source in your car's original menu.

Operating Instructions

Switching Between Systems:

To switch between your car's original system and the adapter's interface (CarPlay/Android Auto), long-press the MENU button on your iDrive controller.

Core Functions:

Upgrade Module features including Wireless CarPlay, Android Auto, Mirror Link, Navigation Maps, Handsfree Calling, Reversing, Bluetooth 5.0, Online Music
Figure 4: Overview of the adapter's key features.
  • Wireless CarPlay: Connect your iPhone wirelessly via Bluetooth and Wi-Fi to access navigation, music, calls, and more.
  • Wireless Android Auto: Connect your Android phone wirelessly via Bluetooth and Wi-Fi for navigation, messaging, music, and calls.
  • Mirror Link (Airplay/Autolink): Mirror your smartphone screen (iOS via Airplay, Android via Autolink) directly to your car's display.
  • Bluetooth Music: Stream music from your phone via Bluetooth.
  • Bluetooth Hands-free Calling: Make and receive calls safely while driving.
  • Online Navigation: Use your preferred navigation apps (Google Maps, Waze, Apple Maps, etc.) directly on the car screen.
  • Reversing Camera Support: Supports original and aftermarket rear cameras, including parking radar display.

Control Methods:

Original car controls supported: iDrive knob, steering wheel controls, original car systems, reversing system, original CD player, original sound stereo
Figure 5: The adapter integrates seamlessly with your BMW's original controls and systems.
  • iDrive Knob Control: Navigate menus and select options using your car's original iDrive controller.
  • Steering Wheel Controls: Use your steering wheel buttons to control volume, track skipping, and answer/end calls.
  • Voice Control (Siri/Google Assistant): Activate your phone's voice assistant for hands-free commands (e.g., navigation, music playback, calls).

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the adapter unit. Do not use liquid cleaners or solvents.
  • Environment: Avoid exposing the unit to extreme temperatures, direct sunlight, or high humidity.
  • Connections: Periodically check that all cables are securely connected.

Troubleshooting

ProblemPossible CauseSolution
No audio from CarPlay/Android AutoAUX not activated or selected; AMI cable missing.Ensure AUX is activated in car settings and selected as audio source. Check if AMI cable is required and connected.
No display from adapterIncorrect LVDS connections; power issue.Verify LVDS IN/OUT cables are correctly connected. Check power harness connections.
CarPlay/Android Auto not connecting wirelesslyBluetooth/Wi-Fi issues; phone settings.Ensure phone's Bluetooth and Wi-Fi are on. Pair phone via Bluetooth first. Check phone's CarPlay/Android Auto settings.
Cannot switch to adapter systemMENU button not pressed correctly.Long-press the iDrive MENU button (typically 3-5 seconds).
Reversing camera not displayingCamera not connected; reverse detection wire issue.Check REAR-CVBS connection. Ensure Brown 'Reverse detection' wire is correctly connected.

Specifications

FeatureDetail
ConnectivityWireless CarPlay, Wireless Android Auto, Bluetooth 5.0, Wi-Fi, USB
FunctionsCarPlay, Android Auto, Mirror Link (Airplay/Autolink), Navigation, Hands-free Calling, Online Music, Reversing Camera Support
Input/OutputUSB, Microphone Input, LVDS In/Out, CVBS In (Front/Rear Camera), AUX Out
Power Supply12V DC (Vehicle Power)
Package Dimensions20 cm (Length) x 15 cm (Width) x 10 cm (Height)
Package Weight1.2 kg

User Tips

  • Installation Videos: If you are unsure about the installation process, check with the seller for any available installation videos or guides specific to your BMW model.
  • System Verification: Always double-check your BMW's infotainment system (CCC or CIC) and the corresponding LVDS plug type before purchasing and installing to ensure full compatibility.
  • Audio Setup: Remember that proper audio routing often depends on selecting the correct AUX input in your car's original system.

Warranty and Support

For warranty information, technical support, or any issues not covered in this manual, please contact your original seller or BONROAD customer service. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.