MEKEDE SS-MTC5

Contents

MEKEDE 6.25-inch Portable Motorcycle Display User Manual

Model: SS-MTC5

1. Product Overview

The MEKEDE SS-MTC5 is a 6.25-inch portable motorcycle display designed to enhance your riding experience with smart features. It supports wireless CarPlay and Android Auto, dual 1080P camera recording, GPS navigation, and offers IP67 waterproofing for durability in various environments. It also features dual Bluetooth channels and WiFi connectivity.

MEKEDE 6.25-inch Motorcycle Navigation Display with CarPlay, Android Auto, Dual BT, WiFi, Dual 1080P Recording, IP67 Waterproof
Figure 1: MEKEDE 6.25-inch Portable Motorcycle Display with key features highlighted.
Video 1: Product demonstration showing TF card insertion, camera view, button functions, settings, Bluetooth pairing, music playback, and map navigation.

2. Setup

2.1 Package Contents

Ensure all components are present:

  • MEKEDE 6.25-inch Portable Motorcycle Display (SS-MTC5)
  • Dual 1080P Cameras
  • Control Buttons
  • Mounting Accessories
  • Power Cable
  • User Manual (this document)

2.2 TF Card Installation

The device supports a C10 32G-256G TF card. It is recommended to format the TF card in the host settings before first use.

  1. Locate the TF card slot on the device (refer to Figure 4, item 3).
  2. Gently insert the TF card into the slot until it clicks into place.
  3. Ensure the TF card is securely inserted.

2.3 Camera Connection

Connect the dual 1080P cameras to the designated ports on the device. Ensure connections are tight to prevent disconnections during operation.

2.4 Power Connection

Connect the power cable to your motorcycle's power supply. Pay attention to tightening each port when wiring. Do not reverse the connection; otherwise, the device may not turn on/display, or even burn out. The 6.25-inch motorcycle navigation does not support motorcycle voltage exceeding 30V for use.

2.5 Mounting the Device

Securely mount the display and cameras using the provided accessories. Ensure the display is positioned for optimal visibility without obstructing your view of the road.

3. Operating Instructions

3.1 Device Layout and Button Functions

Product information with numbered parts and button functions table
Figure 4: Device layout and button functions.
Table 1: Button Functions
No.Component/ButtonShort Press FunctionLong Press Function
1Light SensorAutomatically adjusts screen brightness.
2Microphone receiving holeReceives audio input.
3TF Card slot holeFor inserting the TF memory card.
4Cycle buttonEnter rear view interface / Return to previous interface (CP mode only: answer phone)Power off (10 seconds)
5Camera buttonOne-click capture (CP mode only: hang up phone)Lock video (3 seconds)
6Main interface buttonEnter main interface / mobile phone interconnection interfaceClose/open touch function (5 seconds)

3.2 Wireless CarPlay / Android Auto Connection

When the machine is powered on, it will try to automatically connect to the last connected phone. To connect a new device:

  1. Turn on Bluetooth on your iPhone or Android phone.
  2. On your phone, search for the device Bluetooth name (e.g., MT02-4B99) and connect.
  3. Follow the prompts to allow CarPlay or Android Auto to connect.
  4. For Android Auto, ensure your mobile phone is Android 11 or above and supports 5G WiFi. Do not turn on the VPN function of your phone during screen mirroring.
Wireless CarPlay and Android Auto connection steps and interface
Figure 2: Wireless CarPlay and Android Auto connection guide.

3.3 Dual Bluetooth Channels

The device supports dual Bluetooth channels, allowing you to connect your phone for CarPlay/Android Auto and simultaneously connect to a Bluetooth headset, helmet, or other BT audio device for music, phone calls, and navigation audio.

Diagram showing dual Bluetooth channels connecting to phone and helmet/audio
Figure 3: Dual Bluetooth channels for phone and helmet/BT audio.

3.4 GPS Navigation

You can use navigation applications downloaded through CarPlay or Android Auto, such as Google Maps, Waze, Tomtom Go, etc.

3.5 Dual Camera Recording

The device is equipped with 1080P ultra HD dual cameras for seamless loop recording, starry night vision, and full-color recording at night. You can view camera images and recordings in real-time by connecting to WiFi and using the dedicated mobile app.

Dual HD cameras for 1080P recording with starry night vision
Figure 5: Supports HD dual cameras for recording.
Instructions for viewing camera images in real-time via WiFi and mobile app
Figure 6: View camera images in real-time via WiFi and mobile app.

3.6 Settings

Navigate through the device settings to customize various options:

  • Brightness Control: Adjust screen brightness manually or enable auto mode.
  • Touch Mode: Switch between 'Normal Mode' and 'Rainwater mode' for optimal touch response in different conditions.
  • Record Resolution: Select between 720P and 1080P for camera recording.
  • Split Time: Set the duration for video segments (e.g., 1min, 3min, 5min).
  • Microphone: Turn the microphone on or off for recording audio.
  • Rear Mirror Image: Enable or disable the rear mirror image display.
  • Language: Select your preferred language for the device interface.
  • Date and Time: Set the current date and time, and choose between 12-hour or 24-hour system.
  • Storage Info: View information about the inserted TF card.
  • Format: Format the TF card.
  • Factory Reset: Reset the device to its factory default settings.
  • Firmware Version: View the current firmware version.

4. Maintenance

4.1 Cleaning

Use a soft, dry cloth to clean the display and device body. Avoid using abrasive cleaners or solvents that may damage the screen or casing. For cameras, gently wipe the lenses with a microfiber cloth.

4.2 TF Card Management

Regularly format your TF card through the device settings to maintain optimal recording performance and prevent data corruption. Back up important recordings before formatting.

4.3 Waterproofing

The device has an IP67 waterproof rating, meaning it is dustproof, shockproof, durable, and rustproof, and can withstand rain exposure and immersion. However, avoid prolonged submersion or high-pressure water jets to ensure longevity.

IP67 Waterproof feature demonstration with device partially submerged in water
Figure 7: The device features IP67 waterproofing.

5. Troubleshooting

  • Device not turning on/displaying: Check all wiring connections to ensure they are tight and correctly oriented. Verify that the motorcycle voltage does not exceed 30V.
  • No sound from Bluetooth earphones/helmet: If using CarPlay/Android Auto navigation or DVR playback, and experiencing no sound, ensure your Bluetooth earphones are correctly paired and selected as the audio output.
  • Screen unresponsive to touch: If the screen cannot be touched, confirm whether the screen lock function is enabled. Long press the Main interface button (6) for 5 seconds to toggle the touch function.
  • General usage issues: If you encounter persistent issues, try resetting the device to factory settings via the 'System' menu.
  • CarPlay/Android Auto connection issues: Ensure your phone's Bluetooth is on and correctly paired. For Android Auto, verify your phone is Android 11 or above and supports 5G WiFi. Disable any VPN functions on your phone during screen mirroring.

For any further questions or issues, please contact MEKEDE customer service at WWW.MEKEDE.COM.

6. Specifications

FeatureSpecification
Model NameSS-MTC5
Brand NameMEKEDE
Item TypeCar Monitors
Display Size6.25 inch
Resolution800x480
SystemLinux OS
TF SlotWiFi 5G (supports C10 32G-256G TF card)
BluetoothDual-channel Bluetooth
Operating Temperature-20℃ to 80℃
Storage Temperature-20℃ to 80℃
Video Formats3GP/ASF/AVI/DivX/mkv/MOV/MP4/MPG/TS/VOB/WEBM/M4V/FLV
Audio FormatsMP3/MP2/WAV/AAC/AMR/M4A/OGG/APE/FLAC
Memory2GB Flash Memory
USB ClientMini USB Client 2.0
Charger5V/2.5A input
Item Weight900g
Item Size (L x W x H)164mm x 83mm x 35mm
MaterialPlastics
CertificationCE
OriginMainland China
Product dimensions: 164mm length, 83mm width, 35mm height, 6.25-inch screen
Figure 8: Device dimensions.

7. User Tips

  • Secure Mounting: Always ensure the device and cameras are securely mounted to prevent detachment during rides, especially at high speeds or on rough terrain.
  • TF Card Maintenance: Regularly check the TF card for available space and format it periodically to ensure continuous and reliable recording.
  • Firmware Updates: Keep your device's firmware updated to benefit from the latest features, performance improvements, and bug fixes. Check the manufacturer's website for updates.
  • Screen Protection: While the device is durable, consider using a screen protector to prevent scratches and prolong the life of the display.
  • Bluetooth Connectivity: For the best audio experience, ensure your Bluetooth headset or helmet is fully charged and within range of the device.

8. Warranty and Support

8.1 Warranty Information

This product comes with a one-year factory warranty. Accessories are not included in the warranty. The warranty period begins from the date of receipt confirmation. Firmware, software, UI, and GPS navigation map updates are provided for free.

8.2 Customer Support

For any support inquiries, technical assistance, or warranty claims, please visit the official MEKEDE website: WWW.MEKEDE.COM.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.