1. Introduction
Thank you for choosing the SMAILWOLF M3/M3PRO Wireless Gaming Mouse. This manual provides detailed instructions for setting up, operating, and maintaining your mouse to ensure optimal performance. The M3/M3PRO mouse offers versatile three-mode connectivity (Bluetooth, 2.4G wireless, and wired USB-Type-C) and is designed for competitive gaming and everyday use with its lightweight design and high-performance sensor.

The SMAILWOLF M3 Wireless Gaming Mouse, featuring PAW3311 sensor and three-mode connectivity.
2. Product Overview
2.1 Key Functions
- Left click
- Right-click
- Side key +
- Side key -
- Rollers (Scroll Wheel)
- DPI button
- PB button (Pairing/Mode Switch)
- Bluetooth/Wireless switching
- Type-C charging port
- 2.4G storage compartment (for USB receiver)

Detailed view of the mouse components, including buttons, sensor, battery, and charging port.
2.2 Indicator Light Description
- **2.4G Mode:** Red Light
- **Bluetooth Mode 1 (BT1):** Blue Light
- **Bluetooth Mode 2 (BT2):** Green Light
- **Low battery:** Green indicator light flashing
- **Charging:** The indicator light is steadily lit in red
- **Fully charged:** The red indicator light turns off
3. Setup and Connection
3.1 Charging the Mouse
Before first use, it is recommended to fully charge the mouse. Connect the provided Type-C cable to the charging port (9) on the mouse and the other end to a USB power source (e.g., computer, USB wall adapter). The indicator light will be steadily red during charging and turn off when fully charged.
3.2 Wired Mode Connection
- Connect the Type-C cable to the mouse's charging port (9) and the other end to your computer's USB port.
- Ensure the mouse's switch is set to wired mode (if applicable, otherwise it will automatically detect wired connection).
- The mouse is now ready for use. Moving the mouse will control the computer screen pointer.
3.3 2.4G Wireless Connection
- Locate the 2.4G USB receiver stored in the compartment (10) at the bottom of the mouse.
- Insert the receiver into an available USB port on your computer.
- Switch the mouse's connection mode to 2.4G (using switch 8).
- The indicator light will turn red. Once successfully paired, the red light will remain on for approximately 3 seconds before turning off, indicating the mouse is ready for use.
- **If unable to connect:** Long press and hold the PB key (7) for three seconds while in 2.4G mode. The red light will flash. Insert the receiver into the computer's USB port, and the mouse will automatically connect when close to the receiver. After connection, the red light will stay on for three seconds and then turn off.
3.4 Bluetooth Connection
- Switch the mouse's connection mode to BT (using switch 8).
- Short press the PB key (7) to select either Bluetooth BT1 (blue light) or BT2 (green light).
- **For BT1 (Blue Light):** After selecting BT1, press and hold the PB key (7) for about three seconds. The indicator light will flash blue. On your device (phone, laptop, etc.), enable Bluetooth and search for devices. Select "mouse M3-1" from the list and connect. After successful pairing, the blue indicator light will remain on for about 3 seconds, indicating a successful connection.
- **For BT2 (Green Light):** After selecting BT2, press and hold the PB key (7) for about three seconds. The indicator light will flash green. On your device, enable Bluetooth and search for devices. Select "mouse M3-2" from the list and connect. After successful pairing, the green indicator light will remain on for about 3 seconds, indicating a successful connection.

Visual guide for connecting the mouse via Type-C, 2.4G wireless, and Bluetooth.
4. Operating Instructions
4.1 DPI Adjustment
The mouse supports multiple DPI settings: 800, 1600, 2400, 3200, 6400, and 12000. You can cycle through these settings by pressing the DPI button (6). The DPI can also be adjusted using the dedicated driver software for more precise control.
4.2 Return Rate Adjustment
To adjust the polling rate (return rate), press and hold both the middle button (scroll wheel) and the right mouse button simultaneously for 3 seconds. Alternatively, the polling rate can be modified through the mouse's driver software.
Video showcasing the SMAILWOLF M3PRO mouse features, including its PAW3311 sensor, 1KHz return rate, 12000 DPI, 20 million click lifespan, lightweight design (approx. 63g), tri-mode connection, and anti-slip stickers.
4.3 Hibernate and Wake-up
- **Light Sleep Mode:** The mouse enters a light sleep mode after 15 seconds of inactivity. It can be woken up by moving the mouse or pressing any button.
- **Deep Sleep Mode:** The mouse enters a deep sleep mode after 20 minutes of inactivity. To wake it up, press any button.
5. Maintenance
To ensure the longevity and optimal performance of your SMAILWOLF M3/M3PRO mouse, follow these maintenance guidelines:
- **Cleaning:** Use a soft, dry cloth to clean the mouse. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution. Avoid using harsh chemicals or abrasive materials.
- **Storage:** Store the mouse in a cool, dry place away from direct sunlight and extreme temperatures.
- **Cable Care:** Avoid sharp bends or excessive pulling on the Type-C cable to prevent damage.
- **Receiver Care:** When not in use, store the 2.4G USB receiver in its designated compartment to prevent loss or damage.
6. Troubleshooting
- **Mouse not responding:** Check the battery level. If low, charge the mouse. Ensure the correct connection mode (wired, 2.4G, or Bluetooth) is selected. For wireless modes, ensure the receiver is properly inserted or Bluetooth is paired.
- **2.4G connection issues:** Try the code pairing method described in Section 3.3. Ensure the receiver is not too far from the mouse.
- **Bluetooth pairing failure:** Ensure the mouse is in the correct Bluetooth pairing mode (BT1 or BT2 flashing light) and your device's Bluetooth is enabled and searching. Try re-pairing.
- **Intermittent connection:** Ensure there are no strong interference sources (e.g., other wireless devices) nearby.
- **DPI not changing:** Ensure you are pressing the correct DPI button (6). If using driver software, ensure it is installed and configured correctly.
7. Specifications

Detailed product parameters for the SMAILWOLF M3 series.
| Feature | M3 | M3PRO |
|---|---|---|
| Product Model | M3 / M3PRO | |
| Interface Type | USB-Type-C | |
| Connection Methods | BT Bluetooth, 2.4G Wireless, USB Wired | |
| Optical Sensor | S205 | PIXART PAW3311 |
| Wired Return Rate | 1000Hz | |
| 2.4G Wireless Return Rate | 125Hz/250Hz/500Hz/1000Hz | |
| Bluetooth Return Rate | 125Hz | |
| Movement Speed (IPS) | 120IPS | 300IPS |
| Acceleration (G) | 25G | 35G |
| DPI Settings | 800-1600-2400-3200-6400-12000 (Adjustable via button/driver) | |
| Battery Capacity | 300mAh | 500mAh |
| Charging Current | 300mA | |
| Charging Voltage | 5V±0.5V | |
| Product Weight | 65±3g | |
| Product Size | 119mm * 62mm * 38.6mm | |
| Data Cable Length | Type-C / 1.6 meters | |
| Wireless Transmission Distance | 10 meters | |
| Supported Operating Systems | PC Win2000/Win XP/WINME/Vista/Win7/Win8/Win10/Win11 /Android/Linux/Mac, etc. | |
| Number of Keys | 6 | |
8. User Tips
- For optimal gaming performance, use the 2.4G wireless or wired connection modes, as they offer higher polling rates compared to Bluetooth.
- Regularly check the battery indicator (flashing green light) to avoid interruptions during use.
- Experiment with different DPI settings to find what best suits your tasks and games.
- Consider using the anti-slip stickers (if included with your model) for enhanced grip and control, especially during intense gaming sessions.
- Keep the mouse driver software updated for access to the latest features and performance improvements.
9. Warranty and Support
For detailed warranty information, technical support, or to access the official user manual in PDF format, please refer to the manufacturer's website or the documentation provided with your purchase. A PDF version of the user manual is available here.