Introduction
Thank you for choosing the RAVEMEN CL01 Pro Bike Rear Light. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new bicycle taillight. Please read it thoroughly before use to ensure optimal performance and safety.
Image: The RAVEMEN CL01 Pro Bike Rear Light with its mounting bracket.
Package Contents
Please check the package to ensure all items are present:
- 1 x RAVEMEN CL01 Pro Bike Tail Light
- 1 x Strap Mount (ABM14)
- 1 x Saddle Rail Mount (ABM25)
- 1 x USB-C Charging Cable
- 1 x User Manual
Image: All components included in the CL01 Pro package.
Specifications
| Attribute | Value |
|---|---|
| Model Number | CL01 Pro |
| Type | Tail Light |
| Power Supply | Battery (200mAh/3.7V rechargeable Li-ion) |
| Body Material | Plastic |
| Mounting Placement | Seatpost |
| Waterproof Level | IPX6 |
| Intelligent Sensing | Yes |
| Support Dimmer | 5 - 8 Files |
| LED | High-efficiency red LEDs |
| Dimensions (light unit) | 55mm (L) x 30mm (W) x 14mm (H) |
| Weight (light unit) | 22g |
| Certification | CE, FCC, RoHS |
Image: Diagram showing the dimensions of the CL01 Pro light unit (5.6cm L x 2.8cm W x 1cm H, 22g).
Image: Table detailing light modes (High, Low, Warning flashing, Rapid flashing, Slow flashing) with corresponding brightness (lumens), run time (hours), impact resistance (1 meter), and water resistance (IPX6).
Setup
Mounting Options
The CL01 Pro offers versatile mounting options for different bicycle setups.
Option 1: Seatpost Installation (using ABM14 Strap Mount)
- Strap the ABM14 mount onto the seatpost.
- Slide the CL01 Pro into the slot until it clicks securely into place.
Option 2: Saddle Rail Installation (using ABM25 Mount)
- First, install the tail light connector properly, then tighten the screws.
- Mount the ABM25 on the seat rail, adjust it to the desired position, and then tighten the screws.
- Slide the CL01 Pro onto the rail mount until it locks into position.
For a visual guide on installation, please refer to the video below:
Video: Demonstrates the installation process for both seatpost and saddle rail mounts, along with basic operation.
Operating Instructions
Power On/Off
- To turn on/off the power, press the power button for 1.5 seconds.
Mode Cycling
- Once powered on, click the power button to cycle through the available lighting modes (High, Low, Warning flashing, Rapid flashing, Slow flashing).
Battery Indicator
A quick press of the power button when the light is off will show the battery status:
- Green light: Battery > 40%
- Red light: Battery 5-40%
- Blinking Red light: Battery < 5% (Low battery)
Auto On-off and Brake Detection Mode
This mode enhances safety and conserves battery by intelligently managing the light's operation.
- Activation: To activate this mode, press the power button for 3 seconds until the light blinks quickly 5 times.
- Auto On-off: The tail light will automatically turn off after 2 minutes of inactivity and power on again upon detecting motion.
- Brake Detection: The light automatically increases brightness for 2 seconds when braking to alert traffic behind you.
- Deactivation: To exit this mode, turn off the light and press the power button for 3 seconds until the light blinks slowly 3 times.
Charging
The CL01 Pro features a concealed USB-C charging port for convenience and protection.
- Locate the concealed USB-C port on the device.
- Plug the provided USB-C cable into the port and connect the other end to a USB power source (e.g., computer, wall adapter).
- During charging, the power button will blink red.
- Once fully charged, the power button will show a constant green light.
Maintenance
- Cleaning: Wipe the light with a soft, damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials.
- Water Resistance: The CL01 Pro is IPX6 water-resistant, meaning it can withstand heavy rain and splashes. However, it is not designed for submersion. Ensure the USB-C port cover is properly sealed when not charging to maintain water resistance.
- Storage: Store the light in a cool, dry place when not in use. If storing for an extended period, charge the battery to approximately 50% to prolong its lifespan.
Troubleshooting
- Light does not turn on: Ensure the battery is charged. If the battery indicator shows low power, charge the device.
- Light modes are not changing: Check if the light is in Auto On-off/Brake Detection mode. If so, exit this mode to manually cycle through modes.
- Brake detection not working: Ensure the light is securely mounted and the Auto On-off/Brake Detection mode is activated.
- Charging issues: Verify the USB-C cable and power source are functioning correctly. Ensure the cable is fully inserted into the charging port.
- If you experience any other issues, please refer to the warranty and support section.
User Tips
- Always ensure your CL01 Pro is fully charged before long rides to maximize visibility and safety.
- Utilize the Auto On-off and Brake Detection features for enhanced safety and battery life, especially during commutes or group rides.
- Periodically check the mounting bracket for tightness to prevent the light from shifting or falling during your ride.
- Clean the light's lens regularly to maintain optimal brightness and visibility.
Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact RAVEMEN customer service through their official website or the retailer where you purchased the product. Keep your proof of purchase for warranty claims.
