1. Introduction
Thank you for choosing the ANTUSI A2 Bike Motorcycle Alarm Security System. This device is designed to provide enhanced security for your bicycle, electric bicycle, motorcycle, or scooter with its advanced vibration sensing, loud alarm, and convenient remote control features. Please read this manual thoroughly before use to ensure proper installation and operation.

Figure 1: ANTUSI A2 Alarm System (Alarm Unit and Remote Control)
2. Package Contents
Please check the package for the following items:
- Alarm Host Unit (1)
- Remote Control (1)
- Host Mounting Bracket (1)
- Tube-shaped Bracket Silica Gel Pad (1)
- Remote Control Bracket (1)
- USB Charging Cable (1)
- Cable Ties (2)
- Mounting Screws (for host bracket) (1)
- Instruction Manual (1)

Figure 2: All components included in the ANTUSI A2 package.
3. Product Features
- High-Decibel Alarm: Emits a loud 105-115dB sound to deter thieves.
- 3D Displacement Sensor: Detects movement, collision, and tilt, triggering the alarm quickly.
- IPX5 Waterproof: Designed to withstand wind, rain, and snow.
- Wireless Remote Control: Conveniently arm, disarm, adjust settings, and locate your vehicle.
- Electric Bell Function: Can be used as a regular bell/horn.
- Find Bike Function: Helps locate your vehicle in crowded areas (up to 50 meters in open areas).
- Power Display: Blue LED indicators show battery level.
- Rechargeable Battery: Built-in 400mAh lithium battery with power-saving technology.
- Durable Construction: Made from PC+ABS and pure copper materials.

Figure 3: Overview of ANTUSI A2 key features.
4. Setup
4.1. Remote Control Installation
- Attach the remote control bracket to your handlebar using a cable tie. Ensure it's within easy thumb reach.
- Slide the remote control unit into the fixed bracket until it clicks securely.
- To remove the remote control, press the bottom buckle on the bracket and slide it out.
4.2. Alarm Host Unit Installation
- Choose a suitable, fixed position on your bicycle or motorcycle (e.g., seat post, frame, handlebar stem).
- Secure the host mounting bracket to your chosen location using the provided cable ties. Trim any excess cable tie length.
- Insert the alarm host unit into the fixed bracket.
- Tighten the thumbscrew on the bracket to secure the host unit firmly.
- To remove the host unit, turn the thumbscrew counter-clockwise until it loosens, then slide the host unit out.

Figure 4: Visual guide for remote control and host unit installation.
4.3. Remote Control and Host Pairing
If your remote control and host unit are not paired or lose connection, follow these steps:
- Unpairing (if needed): Press and hold the host unit's power/buzzer switch. After you hear the second