Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MPOETC 9-inch Android 15 CarPlay Autoradio. Designed specifically for Ford Transit Custom models from 2012 to 2021, this unit offers advanced features including GPS navigation, FM/AM radio, Bluetooth connectivity, a responsive touch screen, and support for optional DAB, DVR, and AHD accessories. Please read this manual thoroughly before use to ensure proper functionality and to maximize your driving experience.

Figure 1: MPOETC 9-inch Android 15 CarPlay Autoradio
Safety Tips and Warnings
To ensure safe operation and prevent damage, please pay close attention to the following warnings and reminders:
- Professional Installation Recommended: It is highly recommended that this machine be installed by a car audio professional.
- Power Supply: This unit is suitable for vehicle 12V power supply systems (grounding wire is required). Do NOT install this unit in a 24V vehicle, as it will cause damage.
- Fuse Replacement: Do not repair the power fuse without professional guidance. Improper use of the fuse can damage the machine or cause a fire.
- Driving Safety: To avoid violating traffic rules and ensure safety, drivers must not watch videos or operate the machine while driving.
- Product Integrity: For safety and to ensure normal use, invite professionals to install, disassemble, or repair the machine to avoid damage and accidents.
- Environment: Avoid placing this product in a humid environment or near water to prevent fire due to electric shock or other damage.
- Power Connection Note: To prevent burning out the machine, do not energize the unit until you have correctly connected the power cord.
Setup and Installation
1. Initial Test
Before proceeding with the full installation, perform a quick test to confirm the device is working correctly. This helps identify any issues before they become complicated by the full installation process.
- Combine the red and yellow wires of the car stereo and connect them to the positive pole of a 12V battery.
- Connect the black wire to the negative pole of the battery.
- After approximately 2 seconds, check the car stereo. If the screen lights up, the unit is functioning properly.
If the unit passes this test but fails to work after full installation, recheck all installation steps.
2. Installation Methods
There are typically three methods for installing the head unit. Choose the method that best suits your vehicle and the provided accessories. You can also refer to the installation method of your original car radio.
- Screw-fixed installation: Securing the unit with screws.
- Card position fixed installation: Using clips or brackets to secure the unit in the dashboard opening.
- Special frame fixed installation: Utilizing a custom frame for a seamless fit.

Figure 2: Comparison of dashboard before and after installation
3. Wiring Diagrams
Refer to the following diagrams for correct wiring connections. (Note: Diagrams are for reference; actual product may vary slightly).
3.1. Main Harness Connection

Figure 3: Wiring Harness and Package Contents
| Wire Label | Function |
|---|---|
| KEY-1, KEY-2 | Steering Wheel Control inputs |
| REVERSE | Reverse trigger input for camera |
| BRAKE CTL | Brake control (for video safety) |
| AUTO ANT | Automatic antenna output |
| FR-, FR+, FL-, FL+ | Front Right/Left Speaker outputs |
| RR-, RR+, RL-, RL+ | Rear Right/Left Speaker outputs |
| B+ | Battery Positive (Constant 12V) |
| ILL | Illumination input |
| ACC | Accessory (Switched 12V) |
| GND | Ground |
3.2. Back Interface Diagram
This diagram illustrates the various input and output ports on the rear of the head unit.

Figure 4: Rear View of Head Unit Ports
- Power Cable
- RCA Input/Output
- Canbus serial cable (optional, check compatibility)
- 2 USB Cables
- Camera Input
- Radio antenna
- GPS Antenna
3.3. Rear View Camera Wiring (Optional)
If you are installing an optional rear view camera, follow this wiring diagram. Ensure the "REVERSE" trigger wire is connected correctly.

Figure 5: Rear View Camera Wiring Diagram
- Connect the camera's red power wire to the positive pole of the reversing lamp.
- Connect the camera's black power wire to ground (GND).
- Connect the video output cable from the camera to the "Camera Input" port on the head unit.
- Connect the "REVERSE" trigger line (often labeled "Back (A6)" in the power harness) to the reversing line of your vehicle.
- Important Note: Regardless of whether you use a rear view camera, please connect the rear view wire. Otherwise, your WiFi and Bluetooth signals may be affected.
Operating Instructions
1. Machine Host Controls
The physical buttons and ports on the head unit provide quick access to essential functions.
| Symbol | Operation & Controls |
|---|---|
| MIC | Built-in microphone hole |
| RST | Reset (press with a sharp object) |
| Power Icon | Press and hold for 3 seconds to power off. Short press repeatedly to mute or unmute. |
| Home Icon | Go to main menu |
| Return Icon | Return to the previous interface |
| Volume Up Icon | Press or hold repeatedly to increase volume |
| Volume Down Icon | Press or hold repeatedly to decrease volume |
2. On-Screen Interface
The touch screen interface provides access to all features and settings. (Note: The main interface may vary slightly between product versions).
2.1. Main Interface Icons
| Icon | Name | Operation |
|---|---|---|
| Home Icon | Main menu | Touch to switch screen to main menu |
| Hide Shortcut Menu Icon | Hide shortcut menu | Touch to hide the shortcut menu button area |
| Backstage Icon | Backstage | Touch to show all programs running in the background |
| Return Icon | Return | Touch to switch screens to return to previous screen |
| Settings Icon | Setting | Touch to enter settings |
| Application Icon | Application | Touch to enter more app interface |
2.2. Drop-Down List Icons
Swipe down from the top of the screen to access the quick settings drop-down list.
| Icon | Name | Operation |
|---|---|---|
| Wi-Fi Icon | Wi-Fi | Turn on/off Wi-Fi |
| Bluetooth Icon | Bluetooth | Turn on/off Bluetooth |
| Screen Off Icon | Screen off | Open/Close Screen |
| Screenshot Icon | Screenshot | Touch to take a screenshot |
| Car Setting Icon | Car setting | Touch to enter Car setting |
| Clean-up Icon | Clean-up | Touch to clean |
| Video Out Icon | Video out | Touch to set Video out |
| Optical Icon | OPTICAL | Turn on/off OPTICAL |
2.3. APP Icons
The main menu displays various application icons. Some apps may require additional accessories to function.
| Icon | Name | Operation |
|---|---|---|
| Bluetooth Icon | BT | Touch to enter Bluetooth settings |
| ESSGOO Voice Icon | ESSGOO Voice | Touch to enter smart voice settings |
| ESSGOO+ Icon | ESSGOO + | Touch to enter the intelligent voice software |
| DAB+ Icon | DAB+ | Touch to enter DAB+ (Requires optional DAB+ adapter) |
| HERE WeGo Icon | HERE WeGo | Touch to enter offline map |
| Car Set Icon | Car set | Touch to enter car settings |
| Car Settings Icon | Car Settings | Touch to enter settings; enter password 000000 for factory settings |
| Maps Icon | Maps | Touch to enter Google Maps online |
| Phonelink/TIMA Icon | Phonelink/TIMA | Touch to connect to mobile phone |
| Video Icon | Video | Touch to enter video playback |
| File Manager Icon | Filemanager | Touch to enter file management |
3. Main Functions and Usage
3.1. Intelligent Voice - ESSGOO+ (Optional)
The ESSGOO+ intelligent voice assistant allows for hands-free control. Activate it by saying "Hey ESSGOO". You can use specific voice commands for navigation, music playback, and calls. Log in with your Google or Facebook account to access product introductions, operational videos, and promotional content. The system also provides a Q&A section for common issues.

Figure 6: ESSGOO+ Intelligent Voice Interface
3.2. Mirror Link - Phonelink
Mirror Link allows you to display your smartphone screen on the head unit. (Note: Different products may have different Mirror Link apps).

Figure 7: Mirror Link Connection Steps
- Android USB Connection: Click "Android USB", connect your mobile phone via USB cable (ensure USB debugging mode is enabled), and follow the prompts in the TIMA app to connect.
- Android WIFI Connection: Click "Android WIFI", open your mobile phone's hotspot, select it from the list, and follow the prompts in the TIMA app to connect wirelessly.
- iPhone WIFI Connection: Click "iPhone WIFI", open your mobile phone's hotspot, select it from the list, and slide up on your iPhone to click "AirPlay mirror" to connect wirelessly.
3.3. Offline Map - HERE WeGo
To use the offline map feature with HERE WeGo (you can also use Google Maps online):

Figure 8: HERE WeGo Offline Map Setup
- Turn on the device and connect it to the internet via Wi-Fi.
- Find the "HERE WeGo" app in the main menu.
- Follow the app prompts to enter the main map page and find the options menu.
- Click "Use the app offline" and download your preferred map data from the country list.
3.4. CarPlay Software Description (Optional)
The unit supports Apple CarPlay and Android Auto for seamless smartphone integration. You can connect your phone via wired (USB) or wireless (Wi-Fi & Bluetooth) connections.

Figure 9: CarPlay Interface and Connection
- Wired Connection: Connect your smartphone via USB cable.
- Wireless Connection: Connect via Wi-Fi and Bluetooth. Ensure both are enabled on your phone and the head unit.
4. Supported Additional Devices (Optional)
The head unit supports various optional accessories to enhance its functionality. These devices are not included and must be purchased separately.
| Icon | Device Name | Connection Method |
|---|---|---|
| Microphone Icon | External Microphone | RCA MIC Interface |
| DAB+ Icon | DAB+ Adapter | USB |
| DVR Icon | DVR (Dashcam) | USB |
| OBD Icon | OBD2 | Bluetooth |
| Subwoofer Icon | Subwoofer | RCA audio output or subwoofer interface |
| Amplifier Icon | Amplifier | RCA audio output interface |
| Video Output Icon | Video Output | USB |
| USB Disk Icon | U disk | USB |
Maintenance
To ensure the longevity and optimal performance of your MPOETC Autoradio, follow these general maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the screen and exterior surfaces. Avoid abrasive cleaners or solvents that could damage the finish.
- Software Updates: Periodically check for software updates to ensure you have the latest features and bug fixes. Refer to the ESSGOO+ intelligent voice system or the manufacturer's website for update information.
- Fuse Replacement: If a fuse needs replacement, always use a fuse with the correct rating. Consult a professional if you are unsure.
- Environmental Care: Keep the unit away from extreme temperatures, direct sunlight for prolonged periods, and excessive moisture.
Troubleshooting
This section addresses common issues you might encounter. If you experience problems not listed here, please refer to the support section.
- Unit Does Not Power On After Installation:
- Recheck all wiring connections, especially the power (B+, ACC, GND) wires, ensuring they are secure and correctly connected.
- Verify that the initial test (connecting directly to a 12V battery) was successful. If it worked then, the issue is likely with the vehicle's wiring or harness.
- Ensure the unit is not installed in a 24V system.
- No Sound:
- Check all speaker wiring connections.
- Important: If your original car has a DSP (Digital Sound Processor) sound system, this unit may not produce sound. Please confirm your vehicle's audio system type before purchase.
- Verify volume levels on the unit and any connected amplifiers.
- Rear View Camera Not Working / No Image:
- Ensure the camera is correctly wired, including power, ground, and video signal.
- Verify the "REVERSE" trigger wire is connected to the vehicle's reverse light circuit.
- Confirm the camera itself is functional (if possible, test with another display).
- Ensure the rear view wire is connected, as it can affect WiFi and Bluetooth signals.
- Steering Wheel Controls (SWC) Not Functioning:
- Check the connections for KEY-1 and KEY-2 wires on the main harness.
- Access the unit's settings menu to configure steering wheel controls. This usually involves a learning function where you assign functions to buttons.
- If your vehicle uses a CAN bus system for SWC, ensure the optional CAN bus decoder (if applicable and compatible) is correctly installed and configured.
- Android Auto / CarPlay Issues:
- For wired connections, ensure you are using a high-quality USB cable and that USB debugging is enabled on Android phones if required by the Mirror Link app.
- For wireless connections, verify Wi-Fi and Bluetooth are active on both the phone and the head unit.
- Ensure the correct Mirror Link or CarPlay/Android Auto app is selected on the head unit.
- Poor Wi-Fi or Bluetooth Signal:
- Ensure the rear view camera wire is connected, as it can impact these signals.
- Check for any obstructions around the unit's antennas.
Specifications
The following table details the technical specifications of the MPOETC Autoradio.

Figure 10: Model Comparison and Detailed Specifications
| Category | Parameter |
|---|---|
| System | Android 15 |
| Screen | 9-inch IPS Capacitive Touch Screen |
| Resolution | 1280*720 |
| CPU | Cortex A53 1.3GHz x4 (8227L and MT8163) |
| RAM | 4GB |
| ROM | 64GB |
| Radio Band | FM 87.5–108 MHz / AM 522–1620 kHz (with RDS) |
| Bluetooth Version | 4.1 (or 5.0 depending on model variant) |
| Wi-Fi | Yes |
| GPS Navigation | Built-in GPS, supports online/offline maps |
| Amplifier Output | 4x45W (MOSFET) |
| Digital Media Format | MP3, MP4, WMA, JPEG, FLAC, APE, WAV, AAC, AMR, AVI, ASF, MOV, MPG, MPEG1/2/4, VOB, MKV, FLV, TS, WMV, RMVB, 3GP |
| OSD Language | Chinese (Simplified), Arabic, German, French, Dutch, Spanish, English, Italian, Portuguese, Russian, Turkish, Polish |
| Voltage | 12 V |
| Item Weight | 1.6kg (Package Weight: 1.9kg) |
| Item Size | 9 Inch (228mm x 130mm) |
| Material | Plastic |
| Certification | CE |
| Factory Password | 8888 or 000000 |
User Tips
Based on feedback from other users, here are some helpful tips:
- Wireless Android Auto/CarPlay: Many users report seamless and immediate connection for wireless Android Auto. Ensure your phone's Wi-Fi and Bluetooth are enabled for the best experience.
- Steering Wheel Controls (SWC): If you encounter issues with SWC, double-check the KEY-1 and KEY-2 wiring. Also, make sure to go into the unit's settings to perform the steering wheel button learning function.
- CAN Bus Compatibility: There can be confusion regarding CAN bus support. While the product description mentions "Support Can-Bus" in special features and the package list image shows a "Canbus interface (optional)", some users report issues. It's crucial to verify your vehicle's specific CAN bus requirements and the unit's compatibility before purchase, especially if your vehicle relies heavily on CAN bus for features like SWC or original display integration.
- Camera Cable Length: For larger vehicles like L2 vans, the provided camera cable might be too short. Measure your required cable length before installation and consider purchasing a longer cable if necessary.
- DSP Sound Systems: If your vehicle has an original DSP sound system, this unit might not produce sound. This is a known incompatibility, so confirm your vehicle's audio system type.
Warranty and Support
Your MPOETC Autoradio comes with a 1-Year Warranty.
For any questions, technical assistance, or support, please contact the manufacturer or seller directly.
Manufacturer Information:
- Manufacturer/Exporter: Shen Zhen Xin Sheng Shang Technology Co.,LTD.
- Production Site: Room 303, Building 9, No. 54-6, Guanlan Avenue, Xinhe Community, Fucheng Street, Longhua District, Shenzhen City, Guangdong Province, China, 518000
- Phone: +86 13048907387
- E-mail: support@essgoo.com
- Official Website: www.essgoo.com
- Facebook ID: Essgoo.Official
EU Declaration of Conformity:
This device complies with the essential requirements and other relevant provisions of Directive 2014/30/EU or Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at: https://essgoo.com/pages/doc
You can scan the QR code below to access the document:

Figure 11: QR Code for EU Declaration of Conformity
User Manual PDF:
A detailed user manual in PDF format is available for download. This document contains additional information and diagrams.
Access the PDF manual here: User Manual (PDF)