YRHAND R1

Contents

YRHAND R1 Tuya WiFi Smart Lock

User Instruction Manual

1. Introduction

The YRHAND R1 Tuya WiFi Smart Lock is an advanced keyless entry solution designed for enhanced security and convenience in homes and offices. This smart rim lock offers multiple unlocking methods, remote control capabilities via the Tuya Smart App, and robust weather resistance, making it suitable for both indoor and outdoor use.

This manual provides detailed instructions for the installation, setup, operation, and maintenance of your DMZ-1667ZL Tuya Edition smart lock.

2. Safety Information

  • Read all instructions carefully before installation and use.
  • Do not attempt to disassemble or repair the lock yourself. Refer to qualified personnel for service.
  • Use only the specified battery type (4 AA alkaline batteries) for power.
  • Keep physical keys in a safe place outside the property in case of emergency or battery failure.
  • Ensure the lock is installed on a door that meets the specified thickness requirements (up to 70mm).
  • Protect your passwords and fingerprints from unauthorized access.

3. Product Overview

The YRHAND R1 Smart Lock features a sleek design with multiple components for secure and convenient access.

3.1. Key Components

Diagram of YRHAND R1 Smart Lock components

Figure 3.1: Front and Rear Panel Components with labels including Fingerprint Reader, Touch Keypad, Card Sensing Area, Key Hole, Type-C Port, Electronic Unlock Button, Battery Case, Manual Unlock Knob, and Passage Mode Button.

3.2. Product Dimensions

Dimensional drawing of YRHAND R1 Smart Lock

Figure 3.2: Detailed dimensions of the YRHAND R1 Smart Lock in millimeters.

4. Specifications

Feature Specification
Model Number R1 (DMZ-1667ZL)
Brand Name YRHAND
Connectivity WiFi, Bluetooth (Tuya App)
Ways To Unlock Fingerprint, App, CARD (RFID/NFC), WiFi, Password, Physical Key
Power Supply 4 AA alkaline batteries (DRY BATTERY), DC 12V (optional), Type-C for emergency power
Protection Level IP66 (Waterproof for front and back panels)
Suitable Door Type Steel Door, Wooden Door, Brass Door, Stainless Steel Door, Aluminum Door
Suitable Door Thickness Up to 70mm
Installation Method Drilling installation
Material Aluminum Alloy, Zinc Alloy
Fingerprint Capacity Up to 20 fingerprints
False Acceptance Rate (FAR) <1/100000
False Rejection Rate (FRR) <1%
Response Speed <0.25s (fingerprint extraction), <0.002% (single fingerprint matching)
Voice Prompts 8 selectable languages (English, Thai, Arabic, Russian, Vietnamese, Portuguese, Indonesian, Spanish)
Certification CE, FCC
Image showing IP66 waterproof rating and door thickness compatibility.

Figure 4.1: IP66 Waterproof rating and compatibility with door thickness up to 70mm.

Diagram showing two power supply methods for the smart lock.

Figure 4.2: Two power supply options: 4 AA alkaline batteries or DC 12V connection.

5. Installation

The YRHAND R1 Smart Lock requires drilling for installation. Please refer to the detailed instructions in the official PDF manual for precise measurements and steps. A general overview is provided below.

5.1. Pre-installation Checks

  • Ensure your door type (metal, wooden, etc.) and thickness (up to 70mm) are compatible.
  • Verify all package contents are present.
  • Prepare necessary tools (drill, screwdriver, measuring tape, etc.).

5.2. Drilling Installation

Follow the drilling template provided in the full manual to mark and drill holes for the lock body and mounting plate. Ensure precise alignment to avoid issues.

5.3. Assembling the Lock

  1. Install the mortise into the door edge.
  2. Attach the front panel, ensuring cables are routed correctly.
  3. Connect the cables to the rear panel.
  4. Secure the rear panel to the door.
  5. Install the strike plate on the door frame.
  6. Test the mechanical operation of the lock.
Image showing suitable door types for the smart lock.

Figure 5.1: Examples of suitable door types: Metal Door (Single/Double) and Wooden Door (Single/Double).

6. Initial Setup and App Connection

6.1. Powering the Lock

Insert 4 AA alkaline batteries into the battery case on the rear panel. The lock will power on and indicate readiness for setup.

6.2. Tuya Smart App Download and Connection

  1. Download the Tuya Smart App from your device's APP Store.
  2. Enable Bluetooth and location services on your phone.
  3. Open the Tuya Smart App, click "Add Device" or the '+' icon in the upper right corner.
  4. Select "Camera & Lock" then "Lock (BLE)".
  5. Enable "Bluetooth network distribution" and click "Next".
  6. Wake up the smart lock (e.g., by touching the keypad) and click "Add" in the app.
  7. Once connected, the lock will appear in your app's main interface.
Screenshots of Tuya Smart App for Bluetooth connection and device addition.

Figure 6.1: Tuya Smart App interface for adding the lock via Bluetooth.

6.3. Language Settings

The lock features voice prompts in 8 selectable languages. You can change the language through the Tuya Smart App settings or directly on the lock's keypad if supported by a specific menu option (refer to the full PDF manual for exact steps).

Image showing 8 selectable languages for voice prompts.

Figure 6.2: Available voice prompt languages: English, Thai, Arabic, Russian, Vietnamese, Portuguese, Indonesian, Spanish.

7. Operating Instructions

7.1. Unlocking Methods

Diagram illustrating the 5 unlocking methods: Fingerprint, APP Remote, IC Card, Password, Physical Key.

Figure 7.1: Overview of the five unlocking methods.

  1. Fingerprint Unlock: Place your registered finger on the fingerprint reader. The lock will unlock in approximately 0.5 seconds if recognized.
  2. APP Remote Unlock: From the Tuya Smart App, you can send an unlock command. Alternatively, press "9" and "#" on the lock's keypad to send an unlock request to your phone, which you can then approve or reject in the app.
  3. IC Card Unlock: Tap a registered IC card (or NFC-enabled device if supported) on the card sensing area.
  4. Password Unlock: Enter your registered password on the touch keypad. The lock supports virtual passwords (up to 32 digits) where you can enter random digits before or after your actual code to prevent peeping.
  5. Physical Key Unlock: In case of emergency or battery failure, use the provided physical keys to manually unlock the door via the keyhole.

7.2. User Management (via Tuya App)

The Tuya Smart App allows comprehensive management of users and access methods.

  • Add Administrator Fingerprint:
    1. In the app's main interface, go to "Members management".
    2. Click "Administrator" then "Add".
    3. Follow the prompts to place your finger on the fingerprint sensor 6 times.
    4. You can modify the fingerprint name after successful addition.
  • Add User Fingerprint:
    1. In the "Member" interface, click '+' to "Add Member".
    2. Enter the member's name (account number is optional) and click "Save".
    3. Select the newly added member and proceed to add their fingerprints following the same steps as adding an administrator fingerprint.
  • Delete Fingerprints:
    1. To delete a specific fingerprint, select it from the member's profile and choose the delete option.
    2. To delete all fingerprints for a user, remove the member from "Members management".
  • Share Temporary Unlocking:
    1. In the "Member" interface, click '+' to create a temporary key.
    2. Configure the account information, usage time, or number of uses.
    3. Send the temporary Bluetooth key to the recipient, who can then use it to unlock the door.
  • Unlock Records: Access "Unlock Record" in the app's main interface to view a history of all lock/unlock events.
Screenshots of Tuya Smart App for adding and managing fingerprints and sharing temporary access.

Figure 7.2: Tuya Smart App interfaces for fingerprint management and temporary unlocking.

7.3. Passage Mode

Activate Passage Mode to keep the door unlocked for a period, ideal for gatherings or moving items. This can typically be activated via the app or a dedicated button on the lock (refer to product overview for button location).

8. Maintenance

8.1. Battery Replacement

The lock is powered by 4 AA alkaline batteries. When the battery voltage is low, the lock will provide a red light reminder after unlocking. Replace batteries promptly to ensure continuous operation.

  • To replace, open the battery case on the rear panel, remove old batteries, and insert new ones, ensuring correct polarity.
  • If batteries run out completely, use a Type-C power bank to provide emergency power via the Type-C port for unlocking.

8.2. Cleaning

Wipe the lock's surface with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.

8.3. Factory Reset

To restore the lock to factory settings and delete all stored information (fingerprints, passwords, etc.):

  1. In the Tuya Smart App, go to the lock's settings.
  2. Select "Remove Device" and then choose "Disconnect and wipe data".
  3. Alternatively, a physical reset button may be available on the rear panel (refer to product overview for location). Press and hold for a specified duration to perform a factory reset.

9. Troubleshooting

  • Lock not responding: Check battery level. If low, replace batteries or use emergency Type-C power.
  • Fingerprint not recognized: Ensure your finger is clean and dry. Try re-registering your fingerprint if issues persist.
  • App connection issues: Ensure Bluetooth is enabled on your phone and the lock is awake. Restart the app or re-pair the device if necessary.
  • Voice prompts not working: Check language settings in the app.
  • Lock is stuck: Use the physical key for manual override.

10. User Tips

  • For optimal fingerprint recognition, ensure your finger covers the entire sensor area.
  • Regularly check battery levels through the Tuya app to avoid unexpected lockouts.
  • When using virtual passwords, remember that the actual code can be embedded anywhere within the 32-digit sequence, providing an extra layer of security.
  • Consider setting up temporary passwords for guests or service providers instead of sharing permanent access.

11. Warranty and Support

11.1. Warranty Information

The product typically comes with a manufacturer's limited warranty for defective items. This warranty usually covers manufacturing defects but excludes damage from misuse or improper installation. Please retain your proof of purchase.

11.2. Additional Resources

For a more detailed user manual and specific diagrams, you can refer to the official PDF document: YRHAND R1 Smart Lock User Manual (PDF).

11.3. Contact Support

If you encounter any issues not covered in this manual or require further assistance, please contact YRHAND customer support through your retailer or the official brand channels.

© 2024 YRHAND. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.