ROBORE L20

Contents

ROBORE L20 Running Machine User Manual

Model: L20

1. Safety Instructions

Please read all instructions carefully before assembly and use the treadmill. Keep this manual for future reference.

ROBORE L20 Treadmill in use, showing adjustable incline.

ROBORE L20 Treadmill in use, demonstrating its design and adjustable incline.

General Safety

  • Consider your physical condition before training. Excessive training can be harmful.
  • This product is for home use only, not for professional training or medical treatment.
  • The heart rate display is for reference only and does not provide data for clinical medicine.
  • Wear comfortable, tight-fitting clothes to prevent them from getting caught in the machine.
  • Keep children and pets away from the treadmill, especially when it is in use or unattended.
  • Place the treadmill on a smooth, clean, and flat surface, away from water sources and heat.
  • Do not touch any moving parts or place hands/feet in the gap beneath the running belt.
  • Only one person should use the treadmill at a time.
  • Ensure all screws and bolts are tightened after assembly and regularly checked.
  • Use only accessories provided by the manufacturer.
  • Maximum user weight: 180kg (400lbs).

Electrical Safety

  • Ensure the power plug can reach the socket easily.
  • Insert the power line directly into a qualified socket and ensure it is firm.
  • Use a 220V-240VAC power source.
  • Keep the power line away from the roller and do not use a damaged plug.
  • Always pull the plug out from the socket before cleaning and maintenance.
  • Warning: Failing to pull out the plug may cause personal injury and damage to equipment.

Usage Environment

  • Do not use the product outdoors, in high humidity, or in direct sunshine.
  • Turn off the machine and pull out the plug when leaving it unattended.

2. Setup and Assembly

Carefully read these steps before assembly. Unpack all components and check against the packing list. Pay attention to safety when using tools.

Configuration List

Configuration list diagram showing treadmill parts and hardware.

Diagram illustrating the complete machine and included accessories for assembly.

Assembly Steps

  1. Step 1: Unpacking and Initial Setup
    Lift the machine out of the carton. Fold and lift the armrest.
  2. Step 2: Attaching Accessories
    • Use M4 * 25 screws to secure the side covers of the pillars to both sides.
    • Use M4 * 30 bolts to fix the column onto the running platform.
    • Use M4 * 20 bolts to connect and fix the instrument rack to the pillar.

    Note: The picture below illustrates the left side; the operation is the same for the other side.

    Assembly diagram showing bolt locations for M8*20, M8*30, and M4*25 screws.

    Detailed view of assembly points, indicating locations for M8*20, M8*30, and M4*25 bolts/screws.

  3. Step 3: Manual Lifting Foot Adjustment
    Once assembled, adjust the manual lifting feet as needed.

3. Operating Instructions

Starting the Treadmill

  1. Insert the power plug into the socket and turn on the power switch (light will turn red). You will hear a "beep" and the instrument panel will display information.
  2. Place the safety lock at the yellow position on the instrument panel. Clamp the safety lock onto your clothes. The treadmill can now be used.
  3. To stop the motor immediately in an emergency, pull the safety lock. To resume, place the safety lock back and restart the program.

Console Operating Instructions

Treadmill console display with speed, time, distance, and calorie windows, along with control buttons.

The console features an LED display showing speed, time, distance, and calories, with integrated control buttons.

LED Display Functions:

  • SPEED Window: Displays current speed (1.0-14 km/h).
  • TIME Window: Displays exercise time (0:00-99:59). Counts up or down based on mode.
  • DIS Window: Displays movement distance (0.00-99.90). Counts up or down based on mode.
  • CAL Window: Displays heat consumption (0.0-999.0). Counts up or down based on mode.
  • Windows switch display every 5 seconds (speed, calories, time, distance).

Control Panel Buttons:

  • Speed 3/6/9: Direct speed selection buttons. Press to set speed to 3, 6, or 9 km/h.
  • Start/Stop Key: Turns on/off the treadmill. Press to start or stop a workout.
  • Program/Mode: Cycles through 12 preset programs (P1-P12) and various modes (manual, time countdown, distance countdown, calorie countdown).
  • Speed - / Speed +: Adjusts treadmill speed during operation. Used to set countdown values in mode selection.

Manual Incline Adjustment

The ROBORE L20 features a 2-level manual incline adjustment, offering 10%-15% incline. This allows you to increase training intensity and fat-burning efficiency.

Diagram showing how to adjust the manual incline by placing the support leg into the boost for higher incline.

Illustration of the manual incline adjustment mechanism, showing how to position the support leg for different incline levels.

Detailed view of the manual incline adjustment showing 1.2, 3.2, and 4.2 degree settings.

Close-up of the manual incline adjustment, detailing the different degree settings available.

4. Daily Maintenance

Appropriate maintenance is crucial for the treadmill's optimum state and longevity.

Cleaning

  • Warning: Always cut off power and pull the plug before cleaning.
  • After each use, wipe sweat stains and debris from the instrument and other parts with a clean, damp cloth.
  • Do not use corrosive articles or liquids, and avoid exposing electronic elements to sunlight.
  • Clean the ground around the treadmill weekly to remove dirt brought by shoes.

Running Belt Adjustment

The running belt's tightness and central position may need adjustment over time due to stretching. This is normal.

How to Adjust Running Belt Tightness:

  1. Insert a 5mm hexagon wrench into the regulating screw on the left of the running belt. Turn the wrench 1/4 of a circle clockwise to tighten the rear roller.
  2. Repeat step 1 on the right side, ensuring both screws are turned by the same distance to keep the rear roller parallel with the frame.
  3. Repeat steps 1 and 2 until the running belt is no longer slipping.

Note: The running belt should not be too tight, as this can damage the belt, roller bearings, and cause abnormal sounds. To reduce tension, turn the wrench anticlockwise by the same distance on both sides.

How to Adjust Running Belt to the Middle:

If the running belt deviates from the center due to uneven foot pressure, follow these steps:

  1. Run the treadmill without load at 6KM/H.
  2. Observe the distance from the running belt to the left and right edgestrips.
  3. If the belt tilts left, turn the left screw 1/4 of a circle clockwise with an Allen wrench.
  4. If the belt tilts right, turn the right screw 1/4 of a circle clockwise with an Allen wrench.
  5. Repeat until the belt is centered.

Warning: Do not tighten the roller excessively! This will cause permanent damage to the bearing!

Diagram showing left deviation of running belt and how to adjust.Diagram showing right deviation of running belt and how to adjust.

Illustrations for correcting left and right deviations of the running belt.

Lubricating the Running Belt (Manual Oil)

The treadmill is pre-oiled from the factory. Inspect lubrication frequently. Lubricate after 1 year or 100 hours of running, whichever comes first.

To check: Lift one side of the running belt and touch the running platform. If it's dry, apply oil.

Diagram showing how to apply lubricating oil to the treadmill running belt.

Diagram demonstrating the process of applying silicone oil to the running belt.

Procedure: Open the oil cap, pour non-petroleum silicone oil into the oil port. After oiling, run the treadmill for some time.

Note: Stop the treadmill to ensure the running belt is still when oiling. Use only non-petroleum silicone oil.

5. Troubleshooting

If you encounter any issues, refer to the table below. If the problem persists, contact customer service.

Error CodeDescriptionTroubleshooting
E02Hall sensor detection error.1. Check the Hall sensor wiring terminal;
2. Replace the motor;
3. Replace the lower control board.
E03Overcurrent error.1. Replace the lower control board.
E04Overvoltage error.1. Check the external AC power input;
2. Replace the lower control board.
E05Undervoltage error.1. Check the external AC power input;
2. Replace the lower control board.
E06Overload error.1. Check if the treadmill belt resistance is abnormal;
2. Replace the motor;
3. Replace the lower control board.
E08Lower control board overheating error.1. Check if the treadmill belt resistance is abnormal;
2. Replace the lower control board.
E09Lift motor detection error.1. Check if the lift motor is faulty.
E11U/V/W three-phase open circuit error.1. Check if the motor wiring is faulty;
2. Replace the motor;
3. Replace the lower control board.
E12Lower control board fails to receive relay signal error.1. Replace the lower control board.
E13Relay fails to receive console signal error.1. Check if the communication wiring is faulty;
2. Replace the lower control board;
3. Replace the console.
E07Safety lock disconnection error.1. Check if the communication wiring is faulty;
2. Replace the lower control board;
3. Replace the console.

6. Specifications

CategoryDetail
GeneralBrand: ROBORE
Type: Treadmill
Model: L20
Color: Black
PerformanceMotor Power: 3.5HP
Operating Noise: <45dB
Max User Weight: 180kg (400lbs)
Speed Range: 1-14 km/h
Incline Adjustment: 10%-15% 2-level Manual Incline
Driving Power: Electric
Heart Rate Test: HandHeld
Running SurfaceRunning Belt: Multi-layer Running Belt; Non-slip Diamond Pattern
Running Belt Dimensions: 42.5" × 16.2" (107cm × 40cm)
Running Belt Length: 80-120cm
Running Belt Width: 30-50cm
Console & FeaturesConsole: Touch Screen; 90° Flip Function
Screen: Yes
Shock Absorption System: 2 Silicone Pads + 6 Shock Absorbers
Fold: Yes
With Speakers: No
Bluetooth Connection: No
Dimensions & WeightProduct Size (L x W x H) Unfolded: 128 × 60 × 106 cm
Product Size (L x W x H) Folded: 49.76" x 25.7" x 4.52" (approx. 126.4 x 65.3 x 11.5 cm)
Product Weight: 27kg
Package Weight: 30.5kg
Package Size (L x W x H): 133.5 × 66.5 × 15.5 cm
OtherApplication: Home Use Treadmill
Type of Sports: Cardio Training
Certification: CE
Origin: Mainland China
Overview of ROBORE L20 features including quiet motor, manual incline, max capacity, and foldable design.

Key features of the ROBORE L20 Treadmill: Ultra-quiet design, 3.5HP motor, 10-15% 2-level manual incline, 400lbs max capacity, and fully foldable design.

7. Warranty and Support

Quality Guarantee Commitment

The product comes with a 1-year warranty from the date of purchase. We ensure the product is made from high-quality materials and will repair it if problems arise during normal use within this period.

Covered Components:

  • Frame
  • Wires
  • Foam on armrest
  • Motor
  • Moving wheels

Exclusions from Warranty:

  • Damage due to external reasons.
  • Use of non-original accessories.
  • Incorrect handling by the user.
  • Failure to operate as instructed in this manual.
  • Normal wear and tear of quick-wear parts (e.g., running belt).

This warranty is valid for private home use only and does not apply to gymnasiums or other professional training environments.

For Warranty Claims or Support:

Please contact customer service and provide the following information:

  • Instruction manual (this document)
  • Model of treadmill (ROBORE L20)
  • Serial number of the accessory (if applicable)
  • Proof of date of purchase

Do not send the product to the company without prior confirmation from customer service. We are not responsible for expenses incurred if the product is returned without permission.

For a detailed user manual in PDF format, please refer to the official document: ROBORE L20 User Manual (PDF)

8. User Tips

  • Pre-Workout Stretching: Always perform stretching exercises before and after your workout to prevent muscle strain and improve flexibility. Refer to the 'Sports Suggestion and Guidelines' section for examples.
  • Hydration: Drink plenty of water before, during, and after your workout to stay hydrated. Avoid ice water or sugary beverages; room temperature water is best.
  • Gradual Progression: If you are new to exercise or returning after a break, start with shorter, lower-intensity workouts and gradually increase duration and speed.
  • Safety Lock Usage: Always attach the safety lock clip to your clothing during operation. This ensures the treadmill stops immediately if you lose balance, preventing falls.
  • Regular Lubrication: Check the running belt's lubrication regularly (every 30 days or 30 hours of use) and apply silicone oil if the surface feels dry to maintain smooth operation and extend belt life.
  • Space-Saving Storage: Utilize the 90° vertical folding feature and transport wheels to easily store the treadmill under a bed or against a wall, maximizing your living space.

9. Sports Suggestion and Guidelines

Before starting any exercise program, consult your doctor and undergo a complete physical examination. Do not engage in frequent or violent exercise without medical advice. Stop using the product and consult your doctor if you feel unwell.

Exercise Plan

Your exercise plan should be tailored to your physical condition. If you are new to exercise or significantly overweight, gradually increase your exercise time, starting with a few minutes each week. Aim to eventually exercise continuously for 30 minutes.

You can incorporate various aerobic exercises like walking, jogging, swimming, dancing, or cycling into your routine.

Stretching Exercises

Performing these stretches before and after your workout can help prevent injuries and improve flexibility.

Illustration of forward bends stretch.

Forward Bends: Bend forward with knees bent, trying to touch your toes. Hold for 15 seconds.

Illustration of shoulder lift stretch.

Shoulder Lift: Lift one shoulder towards your ear and hold. Repeat with the other shoulder.

Illustration of neck lateral flexion stretch.

Neck Lateral Flexion: Gently tilt your head to one side, then the other.

Illustration of hamstring stretch.

Hamstring Stretch: With knee slightly bent, push knee straight and chest towards foot.

Illustration of adductor stretch.

Adductor Stretch: Push down on knees with elbows gently, keeping back straight.

Illustration of lateral stretching.

Lateral Stretching: Stretch arms upwards, then stretch one arm to the side. Repeat with the other arm.

Illustration of gastrocnemius stretch.

Gastrocnemius Stretch: Keep knee straight, heel down, feet facing forward.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.