WiiYii C2 with navigation

Contents

C2 GPS Speedometer with Navigation User Manual

Model: C2 with navigation | Brand: WiiYii

1. Introduction

The C2 GPS Speedometer with Navigation is a versatile Head-Up Display (HUD) designed to enhance your driving experience by projecting essential vehicle information directly onto your windshield. This device features a 3.5-inch LED screen, an OBD+GPS dual system for comprehensive data acquisition, and multi-alarm functions for safety. It offers universal compatibility with all car models and supports non-destructive, plug-and-play installation.

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your C2 GPS Speedometer. Please read it carefully to ensure proper use and to maximize the benefits of your device.

C2 Smart Edition HUD with OBD+GPS dual system

Figure 1: C2 Smart Edition HUD with OBD+GPS Dual System

2. Setup Instructions

2.1 Package Contents

Before installation, please verify that all components are present:

  • C2 GPS Speedometer Unit
  • USB Cable (for power/GPS mode)
  • OBD2 Cable (for OBD mode)
  • Anti-slip Mat
  • Reflective Film (optional, for clearer projection)
  • User Manual (this document, also available as PDF: View PDF)

2.2 Installation

The C2 GPS Speedometer is designed for non-destructive, plug-and-play installation, suitable for all car models. It can be powered via the OBD2 port or a USB port.

  1. Placement: Choose a suitable flat surface on your dashboard, typically near the windshield, where the projected display will be clearly visible without obstructing your view of the road. Use the provided anti-slip mat to secure the device.
  2. Connection:
    • For OBD2 Mode: Locate your vehicle's OBD2 port (usually under the dashboard on the driver's side). Connect the OBD2 cable to the port and then to the C2 unit.
    • For GPS Mode (or if OBD2 is incompatible): Connect the USB cable to the C2 unit and plug the other end into a car USB charger or a car's USB port.
  3. Power On: Once connected, the device should power on automatically with your vehicle's ignition.
  4. Reflective Film (Optional): If you experience double images or ghosting on your windshield, apply the reflective film to the desired projection area on the windshield. Clean the area thoroughly before application.
Non-destructive installation, plug and play

Figure 2: Non-destructive installation, plug and play

3. Operating Instructions

3.1 Dual System Operation (OBD+GPS)

The C2 HUD operates on a dual system, automatically detecting the connection type. If connected via OBD2, it will primarily use OBD data. If OBD2 is not detected or incompatible, it will switch to GPS mode.

3.2 Display Modes and Customization

The device features optical imaging without ghosting, providing a clear and immersive head-up display. You can customize the dashboard content and choose from multiple interface colors.

  • One-click Switch: Use the control buttons on the device to cycle through different display interfaces and customize the information shown.
  • Multiple Interface Colors: The display supports various color schemes, which can be changed via the settings.
  • Automatic Photosensitivity: The 18-level automatic light sensor adjusts screen brightness based on ambient light conditions, ensuring clear visibility day and night without glare.
One-click switch with multiple interfaces

Figure 3: Customizable display interfaces

AI Photosensitive display

Figure 4: AI Photosensitive display for optimal visibility

3.3 Available Functions (OBD & GPS)

The C2 HUD provides a wide range of data, including:

  • Driving Data: Vehicle speed (Km/h or MPH), engine RPM, water temperature (°C or °F), battery voltage, clock, fuel consumption, trip distance, trip time, ODO meter, kilometers per liter, oil temperature, turbine pressure, air-fuel ratio, intake pressure, altitude, driving direction.
  • Diagnostic Data (OBD2): DTCs status, freeze DTCs, loop status, engine load, coolant temp, fuel trim, fuel rail pressure, intake air temp, MAF rate, throttle position, oxygen sensor, OBD type, auxiliary input status, engine run time, MIL distance, FRP ref manifold, fuel level, warm-ups count, distance, barometric pressure, air temperature.
  • Performance Tests: Speed up test, brake test.
  • GPS Information: GPS satellite numbers.
Detailed OBD data stream

Figure 5: Comprehensive data display

3.4 Alarm Functions

The device includes multiple alarms to alert you to critical vehicle conditions:

  • Over Speed Alarm
  • RPM Alarm
  • Battery Voltage Alarm
  • Water Temperature Alarm
  • Error Code Alarm (DTCS Alarm)
  • Fatigue Driving Reminder
Multi-alarms for vehicle data

Figure 6: Multi-alarm indicators

3.5 Settings Menu

Access the settings menu to configure various parameters such as language, sound switch, alarm thresholds, brightness adjustment (manual or auto), power on/off behavior, and factory reset options.

Functions Option - Setting page

Figure 7: Settings menu options

3.6 Video Demonstration

Video 1: Demonstration of the HUD in operation at night, showing speed, time, and direction.

4. Maintenance

To ensure the longevity and optimal performance of your C2 GPS Speedometer, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the device's exterior and display screen. Avoid using abrasive cleaners or solvents that could damage the surface.
  • Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Care: Handle connection cables gently to prevent damage. Avoid sharp bends or excessive pulling.

5. Troubleshooting

If you encounter issues with your C2 GPS Speedometer, refer to the following common problems and solutions:

  • Device does not power on:
    • Check if the OBD2 or USB cable is securely connected to both the device and the power source.
    • Ensure your vehicle's ignition is on.
    • If using OBD2, verify your vehicle's OBD2 port is functional. Try the USB connection if available.
  • No display or dim display:
    • Adjust the brightness settings in the device menu (manual adjustment).
    • Ensure the automatic photosensitivity sensor is not obstructed.
    • Check if the reflective film is properly applied if used.
  • Inaccurate speed reading:
    • In GPS mode, ensure the device has a clear view of the sky to acquire satellite signals.
    • In OBD2 mode, compare the HUD speed with your car's dashboard speed. If there's a discrepancy, you might need to calibrate the speed offset in the settings menu (refer to the PDF manual for detailed calibration steps).
  • Error codes displayed:
    • The device can display and clear diagnostic trouble codes (DTCs). Refer to the 'Read all datas' section in the operating instructions or the full PDF manual for interpreting specific codes.
    • Clearing codes may temporarily resolve issues, but it's recommended to address the underlying problem.
  • Ghosting or double image:
    • Ensure the reflective film is correctly installed on your windshield.
    • Adjust the device's angle or position slightly.
Common car troubles the HUD helps diagnose

Figure 8: HUD assisting with common car issues

6. Specifications

Feature Specification
Model C2 (HUD-G2)
System OBD+GPS Dual System
Compatibility 100% Universal for all cars
Connection USB Port, OBD2 Port
Screen Type 3.5 inches LED screen
Folded Size 110*128*42 mm
Unfolded Size 110*128*77 mm
Working Voltage 12V
Environment Temperature -40°C to +80°C
Certifications CE/ROHS/FCC/ISO9001
Package Length 15 cm
Package Width 9 cm
Package Height 11 cm
Package Weight 0.45 kg

7. Warranty and Support

The C2 GPS Speedometer comes with a 2-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For detailed technical support, advanced settings, or specific troubleshooting not covered in this manual, please refer to the comprehensive user manual PDF available online: Download User Manual (PDF).

For further assistance, please contact the seller or manufacturer's customer service.

8. User Tips

  • Optimal Visibility: Experiment with the device's placement on your dashboard and the angle of the reflective film (if used) to find the best viewing position that minimizes distractions and maximizes clarity.
  • OBD vs. GPS Mode: If your vehicle's OBD2 port is difficult to access or if you experience compatibility issues, the GPS mode offers a reliable alternative for speed and basic driving data.
  • Alarm Customization: Take advantage of the customizable alarm thresholds for speed, RPM, and voltage to set alerts that match your driving habits and vehicle's specifications, enhancing safety.
  • Regular Checks: Periodically check the device's connections to ensure they are secure, especially after cleaning or moving the unit.
  • Stay Updated: While not explicitly mentioned, keeping an eye out for any firmware updates from the manufacturer could potentially improve performance or add new features.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.