1. Product Overview
The Hirisi SX1 Carp Fishing Alarm Set is designed to alert anglers to fish bites through sound and light indicators. This set includes multiple waterproof bite alarms and a receiver, offering adjustable settings for various fishing conditions.
Key Features:
- Anti-snag & Long-lasting Performance: Removable snag ear bar prevents line tangles; waterproof ABS build ensures durability; 60-hour runtime plus low power warning avoids sudden shutdowns.
- Clear LED Alert System: 8 LED strips and 20-second signal memory per alarm capture faint bites; 4 LED indicators on receiver instantly identify which rod triggers an alert.
- Customizable & Re-linkable Design: Adjustable tone, volume, and sensitivity; one-click pairing for re-connecting disconnected alarm and receiver.
- User-friendly Multi-function Operation: Supports switchable night light and range test; intuitive long-press controls for power on/off.
- Expandable & Portable Configuration: 2.5mm jack compatible with LED swingers for enhanced alerts; comes with a protective PU case for easy storage and transport.

Figure 1: Hirisi SX1 Carp Fishing Alarm Set (4 alarms + 1 receiver)
2. Safety & Warnings
Important Safety Information:
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
3. Setup Instructions
- Before First Use: Check the main unit and all accessories for damage. Remove all packaging and protective materials.
- Device Installation: Fix the alarm on the rod rest and tighten the adjusting knob securely. Route the fishing line and place it against the sensing contact to ensure sensitive detection.

Figure 2: Alarms installed on fishing rods.

Figure 3: Proper line routing for sensitive detection.
4. Operating Instructions
- Sensitivity Adjustment: Turn the sensitivity knob clockwise to increase sensitivity, and counterclockwise to decrease it. Adjust according to fishing conditions and fish activity.
- Volume & Mode Setting: Switch sound and light alert modes as needed and adjust the volume to ensure clear alarm prompts.
- Fishing Operation: After casting, tighten the fishing line and make sure it is properly in contact with the sensor. Wait for bites. The device will activate sound and light alarms once the fish pulls the line.
- Fish Fighting: When the alarm goes off, lift the rod firmly to hook the fish. Control the reel drag properly to prevent line breakage and fish escape.

Figure 4: Receiver controls and alarm line slot.
Video 1: Demonstration of the Hirisi SX1 bite alarm in action, showing a fish bite and the alarm activating.
5. Maintenance & Storage
- After Use & Storage: Turn off the power and wipe off water, dirt, and debris on the device. Reset the sensitivity knob. Store the product in a dry and cool place.

Figure 5: Waterproof design allows for use in wet conditions, but cleaning is recommended.

Figure 6: The protective PU case for safe storage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Alarm not sounding/lighting | Low battery; power off; incorrect settings (volume/mode); line not in contact with sensor. | Check battery level (low power warning); ensure device is powered on; adjust volume/mode settings; verify fishing line is correctly placed on the sensor. |
| False alarms | High sensitivity setting; wind/water movement; line tangles. | Decrease sensitivity; ensure line is stable; check for and clear any line tangles (use snag ear bar). |
| Receiver not responding to alarms | Alarms and receiver disconnected; out of range; low battery in receiver or alarm. | Perform one-click pairing to re-link devices; ensure devices are within operational range; check and replace batteries if necessary. |
7. Specifications
| Attribute | Detail |
|---|---|
| Product Name | Carp Fishing Bite Alarm Set |
| Model | SX1 |
| Brand | HIRISI |
| Material | ABS |
| Type | Fish Bell/Alarm |
| Waterproof | Yes |
| Battery Runtime (Alarms) | Approx. 60 hours |
| LED Indicators (Alarms) | 8 LED strips with 20-second signal memory |
| LED Indicators (Receiver) | 4 LED indicators |
| Connectivity | Wireless, one-click pairing |
| External Jack | 2.5mm for LED swingers |
| Package Dimensions (L x W x H) | 36 cm x 28 cm x 8 cm |
| Package Weight | 0.982 kg |
| Origin | Mainland China |
| Batch/Serial Number | HRS202606186 |
8. User Tips
- The product features a durable ABS material construction, which is also waterproof, ensuring longevity and reliability in various weather conditions.
- For optimal performance, ensure the fishing line is always in direct contact with the alarm's sensing mechanism.
- Regularly check battery levels, especially before long fishing trips, to avoid unexpected power loss.
- When adjusting sensitivity, start with a lower setting and gradually increase it until you achieve reliable bite detection without excessive false alarms from environmental factors like wind or water currents.
9. Warranty & Support
For warranty information, technical support, or service inquiries, please contact the manufacturer or your retailer. Keep your proof of purchase for any warranty claims.
Manufacturer: SUCCESS COURIER SL
EU Authorized Representative: Ningbo hai ruisi outdoor products co., ltd
For the full user manual in PDF format, please refer to the official document provided by the seller.