1. Introduction
The IOWODO R10 Sport Smart Watch is designed to help you monitor your health and track your fitness activities. Featuring a 1.47-inch TFT HD display, it offers a wide range of functions including heart rate, blood oxygen, and sleep monitoring, along with over 100 sports modes. This manual provides detailed instructions on how to set up, operate, and maintain your smartwatch.


2. Setup Guide
2.1 Charging Your Watch
Before using your IOWODO R10 Smart Watch for the first time, please charge the battery to its full capacity. It is recommended to use a conventional charger above 5V for charging, not the USB interface at the computer terminal.
- Place the magnetic charger on the magnetic charging points of the watch.
- While your watch is charging, the screen will show its progress.
- Once the battery is fully charged, remove the charger.

2.2 Installing the Da Fit App
To unlock the full potential of your smartwatch, install the Da Fit App on your smartphone. You can download the app from the Apple App Store (for iOS) or Google Play Store (for Android), or by scanning the QR code below:
Scan this QR code to download the Da Fit App:

2.3 Device Binding and Bluetooth Connection
Follow these steps to connect your watch to the Da Fit App:
- Open the Da Fit App on your smartphone.
- Navigate to 'APP-Device-Push Message' and open the APP that needs to receive push messages.
- Ensure the Da Fit App continues to run in the background. Refer to the 'APP-My-Background Running Protection Guide' within the app for specific steps.
- Enable notification rights for the Da Fit App. Go to 'APP-Device-Message Push-Notification Rights-Allow app'.
- For iPhone users, manually open 'phone-Settings-Bluetooth-Device Details' and turn on sharing system notifications.
- After the watch is connected to the APP, the APP will prompt a Bluetooth connection pairing reminder. Click 'pairing' to enable the Bluetooth call function on the watch.
- If you do not click 'Pair Bluetooth' on the APP interface, you need to enter your phone's 'Settings-Bluetooth' interface and search for the watch's Bluetooth device for pairing and connection.
Note: The distance between your mobile phone and the watch should be kept less than 10 meters. If disconnection occurs, please refresh the APP interface. If your iPhone was previously connected to this watch via Bluetooth, when binding again, you need to go to 'Mobile Phone - Settings - Bluetooth - Click on this watch Bluetooth device - Ignore Bluetooth' to re-bind.
3. Operating Your Watch
3.1 Control Your Watch
Function Button:
- Press: Wake the screen, return to the home screen, enter the menu interface.
- Hold: Enter the sport interface.
Power Button:
- Press: Screen on/off, return to the previous interface.
- Hold: Power on/off the watch.
Touch Screen:
- Hold the home screen: Change the watch face.
- Swipe: Go to different interfaces.
- Tap: Enter the function.
- Swipe the screen to the right: Return to the previous interface.
3.2 Watch Functions and Settings
Your IOWODO R10 Smart Watch offers a variety of features and customizable settings:
Display Settings:
- Brightness adjustment: Adjust the screen brightness.
- Screen-off time: Set the duration the screen stays on.
- Dial switching: Choose from 6 built-in dial options or customize via the app.
- View of master menu: Select from 8 display styles for the main menu.
- Screen-on switch with wrist turning: Enable or disable the feature to wake the watch by raising your wrist.


Alerts and Notifications:
- Vibration only: Set notifications to vibrate only.
- Vibrate & ring: Set notifications to vibrate and ring.
- Mute: Set notifications to silent mode.
- DND Mode (Do Not Disturb): Disable message and incoming call notifications.
- Screen Notification: Enable the screen to light up automatically when a message arrives.
Health and Fitness Tracking:
- Heart Rate Monitor: 24-hour heart rate monitoring.
- Blood Oxygen Monitor: 24-hour blood oxygen monitoring.
- Sleep Monitor: Accurately record sleep status, including deep sleep, light sleep, and wakefulness time.
- Activity Tracker: Tracks steps, calories, distance, speed, path, and exercise time.
- Sports Modes: Over 100 sports modes including outdoor running, brisk walking, cycling, skipping rope, badminton, basketball, soccer, mountain climbing, rugby, yoga, dancing, spinning bikes, and more.
- Breathing Training: Guided breathing exercises.




Other Functions:
- Phone: Enable or disable answering calls on the watch.
- Phone Reset: Reset watch calls, including deleting call logs and contacts.
- Electronic Name card: Upload QR codes of social apps from your phone album to display on your watch.
- Weather: View weather forecasts.
- Camera Control: Remotely control your phone's camera.
- Music Control: Control music playback on your phone.
- Timer & Countdown: Use stopwatch and countdown functions.
- Find Mobile Phone: Locate your paired smartphone.
- Female Health Reminders: Provides reminders for female health.
- Low Power Mode: Activates power-saving mode by disabling vibration, wrist-to-wake, and reducing screen brightness.

System Settings:
- Restart: Restart your watch.
- Shut down: Turn off your watch.
- Restore factory: Reset the watch to factory settings. Note that all your data and settings will be deleted.
- About: View device information including device name, Bluetooth name, and version.
4. Maintenance
4.1 Water Resistance
The IOWODO R10 Smart Watch is 10M waterproof. If your watch gets wet, clean and dry it thoroughly before putting it back on your wrist. Ensure your skin is dry before wearing the watch again.
4.2 Wearing and Skin Care
- Please do not wear your watch too tight.
- Prolonged rubbing and pressure may irritate the skin, so give your wrist a break by removing the watch regularly.
- For some individuals with sensitive skin, prolonged contact with materials used in watches may cause allergic reactions. These reactions can be due to allergies, environmental factors, extended exposure to irritants like sweat and soap, or other factors. If you have known skin allergies, exercise particular caution when wearing the watch.
5. Troubleshooting
5.1 Connectivity Issues
- Watch not connecting to app: Ensure Bluetooth is enabled on your phone and the watch is within 10 meters. If already connected, try refreshing the app interface. For iPhones, verify 'sharing system notifications' is enabled in Bluetooth settings. If re-binding, remember to 'Ignore Bluetooth' for the watch in your phone's settings first.
- Bluetooth call function not working: Make sure you clicked 'pairing' when prompted by the app during device binding. If not, manually pair the watch's Bluetooth in your phone's settings.
5.2 Battery and Charging
- Watch not charging: Ensure the magnetic charger is correctly aligned with the charging points on the watch. Use a conventional charger above 5V.
- Short battery life: Check if power-saving mode is enabled. If not, consider activating it. Frequent use of power-intensive features (e.g., continuous heart rate monitoring, bright screen) can reduce battery life.
5.3 Display and Notifications
- Screen not lighting up: Check the 'Screen-on switch with wrist turning' setting. Ensure the brightness is not set too low.
- No notifications: Verify that 'Message Push' and 'Notification Rights' are enabled for the Da Fit App. Also, check if 'DND Mode' is active on your watch.
6. Specifications
| Feature | Specification |
|---|---|
| Display Screen | 1.47 inch TFT |
| Resolution | 172*320 |
| CPU | Realtek8762C_2025 |
| Bluetooth Version | BLE5.3 |
| Battery Capacity | 350 mAh (Polymer high-voltage battery) |
| Charging Method | 2PIN magnetic cable |
| Charging Voltage | 5V |
| Charging Time | 2.5 hours |
| Normal Use Battery Life | ≈ 10 days (connected via Bluetooth) / >20 days (R10 model) |
| Standby Time | > 30 days (connected via Bluetooth) / >50 days (R10 model) |
| Waterproof Grade | 10M (Life Waterproof) |
| Operating Temperature | -20℃ to 60℃ |
| Strap Width | 22mm |
| Application Age Group | Adult |
| Compatibility | All Compatible (IOS, Android) |
| Metrics Measured | Blood Oxygen Monitor, Sleep Monitor, Heart Rate Monitor |
| Activity Tracked | Steps Tracker, Activity Tracker, Calorie Tracker |
| Languages Supported | English, German, French, Italian, Spanish, Portuguese, Russian, Arabic, Persian |
7. User Tips
- Optimize Battery Life: To extend battery life, consider enabling the 'Low Power Mode' and disabling features like 'Screen-on switch with wrist turning' if not frequently needed.
- Personalize Your Watch: Explore the Da Fit app to customize watch faces and menu styles to match your preference.
- Regular Cleaning: Keep your watch and wrist clean and dry to prevent skin irritation, especially after workouts or if the watch gets wet.
- Stay Connected: Ensure your phone and watch are within Bluetooth range (under 10 meters) for stable connectivity and timely notifications.
8. Warranty and Support
For detailed item guides and documents, including the full user manual in PDF format, please refer to the official product page or contact customer support. The PDF manual can be found at: User manual (PDF).
For any further assistance or warranty claims, please contact the seller or refer to the support information provided with your purchase.