MEKEDE MN-ZX Multimedia Display Screen for BMW F10 F11

Contents

MEKEDE Linux System Wireless CarPlay Android Auto Multimedia Display Screen

Model: MN-ZX

For BMW 5 Series F10 F11 (2011-2017 CIC NBT)

Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your MEKEDE Linux System Wireless CarPlay Android Auto Multimedia Display Screen. Please read this manual thoroughly before use to ensure proper functionality and safety.

MEKEDE Linux System Wireless CarPlay Android Auto Multimedia Display Screen
MEKEDE Linux System Wireless CarPlay Android Auto Multimedia Display Screen for BMW 5 Series F10 F11.
Before and After Installation of Multimedia Display
Comparison of the car dashboard before and after installation of the multimedia display.

Safety Warnings and Important Notes

For your safety, please observe the following warnings:

  • Do not watch videos or operate the machine while driving. Adjust volume to hear outside sounds clearly.
  • Read this manual and other operating system manuals before operation. Keep for future reference.
  • Pay attention to traffic safety first.
  • If difficulties arise, park your car safely before operating the system.
  • Do not allow children to operate the machine to prevent personal injury or machine damage.
  • Follow traffic rules when using the satellite navigation function.
  • Do not use electronic equipment or open fire in prohibited places (e.g., gas stations, wineries, strong electromagnetic interference areas) to avoid danger.
  • Do not attempt to maintain, repair, or install the machine yourself. Do not install or repair with power on. Installation or repair should be performed by trained professionals.
  • Do not install or store the machine in direct sunlight or near other hazardous substances, especially the LCD screen.
  • Avoid direct hot or cold air from air conditioning vents on the LCD screen, as this may damage the machine or harm occupants.
  • Do not scratch or press the display screen vigorously with sharp or hard objects, as this will damage the display or touch screen.

Important Note: This machine is suitable for car 12V power systems and requires a grounding wire. Do not install on 24V vehicles, as this will damage the unit.

Warning: Do not replace the power fuse without professional guidance. Improper fuse use can damage the machine or cause fire.

Caution: To prevent short circuits, turn off the car and disconnect the connection between ACC and B+ before installation.

Note: Due to continuous product function improvements, this manual is for reference only.

Vehicle Compatibility

This multimedia display screen is compatible with specific BMW 5 Series F10 F11 models. Please verify your car's system (CIC or NBT) and year before installation.

Compatibility table for BMW 5 Series F10 F11 CIC and NBT systems
Compatibility Table:
SYSTEMMODELYEARSCREEN
CIC5 Series F10 F112011-201210.25inch
NBT5 Series F10 F112013-201710.25inch

Visual identification of CIC and NBT systems in BMW F10 F11 dashboards.

BMW Car System Identification Guide
Guide to identify your BMW car system (CCC, CIC, NBT, EVO) by interface and LVDS pin type.

Package Contents

Ensure all the following items are included in your package:

  • 10.25 Inch Multimedia Display Screen
  • Power Cable
  • AUX Cable (for CIC systems)
  • USB Cable
Product Accessories List including screen, power cable, AUX cable, and USB cable
Overview of the product accessories included in the package.
Detailed view of Power Cable, AUX Cable for CIC, and USB Cable
Detailed view of the included Power Cable, AUX Cable (for CIC), and USB Cable.

Installation Guide

It is highly recommended that installation be performed by a car audio professional. Ensure the car is turned off and the ACC and B+ connections are disconnected before starting installation.

Fiber Optic Cable Connection (if applicable)

If your vehicle's factory CD player power cable includes an optical fiber cable, follow these steps:

  1. Remove the green fiber-optic cable with a two-pin connector from the original CD player's power cord.
  2. Insert it into the port on the vehicle CD player end of the Linux power adapter. Ensure a secure connection.
Fiber optic cable connection diagram
Diagram illustrating the connection of the fiber optic cable from the original CD player to the new power adapter. This ensures proper audio signal transfer.

Connect the original vehicle optical fiber cable to the wiring harness of this product.

General Wiring Connections

The following describes the typical wiring connections for different BMW systems. Identify your car's system (EVO, NBT, CIC, CCC) and connect the provided cables accordingly. Refer to the detailed diagrams in the official PDF manual for visual guidance.

EVO Series Wiring

Connect the main power cord, dedicated USB cable for EVO, and CD host cable. The host power cord plug includes connections for Rear view input, Video input, ACC output, GND, Rearview power, and 360DET. Also, plug into the USB interface of the original car.

NBT Series Wiring

Connect the main power cord, USB cable, and CD host cable. The host power cord plug includes connections for AUX output, Rear view input, Video input, ACC output, GND, Rearview power, and 360DET.

CIC Series Wiring

Connect the main power cord, USB cable, and CD host cable. Plug the AUX audio cable into the AUX interface of the original vehicle. The host power cord plug includes connections for Rear view input, Video input, ACC output, GND, Rearview power, and 360DET. For CIC models, a specific line needs to be disconnected from the host power cord plug.

CCC Series Wiring

Connect the main power cord, SIM card + USB cable (x2), and CD host cable. Plug the AUX audio cable into the AUX interface of the original vehicle. The host power cord plug includes connections for 360 DET, Rearview power, ACC OUT, GND, 5V OUT, AUX OUT, Rear view input, Video input, and CAN2 (B). This is connected to the controller.

Initial Setup

1. Main Menu Navigation

Upon turning on the machine, the original car interface will be displayed. Long press the original car MENU key to switch to the navigation interface. The main menu will be displayed first. Touch the home icon (⌂) to return to the main interface, and touch the back icon (↶) to return to the upper menu.

2. System Settings

From the main menu, click "Settings" to enter the system settings interface. This includes options for language, audio, system information, and more. Clicking "Settings" on the screen again will lead to secondary navigation settings.

System Settings menu options
Example of System Settings menu, showing options like Display, Volume, Language, Time, Reverse, and System information.

3. Setting Screen Resolution

After initial installation, it is crucial to verify and set the correct screen resolution to avoid distorted, black, or incorrect aspect ratio displays. Confirm your vehicle's original system supports the desired resolution and select it from the available parameters. If unsure, experiment with different settings until the display appears normally. You can choose between half-screen or full-screen display.

Screen resolution settings interface
Interface for adjusting screen resolution, showing various resolution options like 800*480, 1280*480, and 1440*540.

If the OEM menu shows symptoms like "No Signal" or vertical lines, check the LVDS connector and then set the original menu resolution. Navigate to Settings > Factory Settings, enter code 8866, then select the original car's model and screen size, and finally select the correct resolution one by one.

Troubleshooting screen resolution settings
Steps to set the resolution via Factory Settings (Code: 8866) if the original system display is problematic.

4. AUX Mode Setup (for NBT systems)

To ensure audio output, especially for NBT systems, you may need to manually set the AUX mode. Enter the original system, navigate to CD/Multimedia > External devices, and select "AUX front" to activate AUX. Adjust the volume as needed.

Steps to activate AUX mode in original car system
Step-by-step guide to enter the original system and set it to AUX mode for audio output.

Operating Instructions

1. Bluetooth Function

Click "Bluetooth" on the main interface to access the Bluetooth application. Once paired with your mobile phone, all icons in the interface will light up, and a Bluetooth icon will appear at the top of the interface. This supports mobile phone BT pairing, hands-free dialing, steering wheel control, and BT music playback.

Bluetooth function interface with phone pairing and music playback
The Bluetooth function supports BT music, sync contacts, and synchronous call records for safe driving.

2. Media Playback (Film & Music)

Click "Movie" or "Music" on the main interface to play audio and video files. The system supports multimedia files from external SD cards or USB drives. Supported video formats include AVI, MP4, RMVB. Audio formats include MP3, WAV, and MID. Double-click the screen for full-screen video playback; click any touch area to return to the operation interface.

USB multimedia player for music, movies, photos, and documents
The system supports Android multimedia player functions, allowing playback of music, movies, photos, and documents via USB connections.

3. Wireless/Wired CarPlay & Android Auto

The system supports both wireless and wired CarPlay and Android Auto. Connect your smartphone to access navigation, music, calls, and other apps directly on the display.

Wireless/Wired CarPlay interface
Wireless and wired CarPlay support, displaying iPhone apps like Music, Maps, and Phone on the car screen.
Wireless/Wired Android Auto interface
Wireless and wired Android Auto support, showing Google Maps, YouTube Music, and other apps on the car screen.

For Android Auto Wireless Connection: Turn on Bluetooth and Wi-Fi on your Android phone, then search for and connect to "BTXXXX" via Bluetooth (PIN code: 0000). For Wired Connection: Connect your Android phone to the dedicated USB port using an original or high-quality data cable.

Support wireless/wired mirror link for iOS and Android phones. This feature allows you to display your phone's screen on the multimedia unit, enabling navigation, video playback, and music from your phone's apps.

AirPlay and Autolink features for screen mirroring
Overview of Wireless/Wired CarPlay, Android Auto, AirPlay, and Autolink functionalities.
Phone Mirrorlink for iPhone and Android
Demonstration of phone mirrorlink feature for both iPhone and Android devices.

5. GPS Navigation

The unit features a built-in global positioning system with omni-directional map display, synchronous real-time traffic conditions, and accurate positioning. It supports various navigation applications.

GPS Navigation with various map applications
GPS Navigation feature supporting apps like Navitel, iGO, Sygic, Yandex, Waze, and Goode Map.

6. AHD Reversing Video

The system supports AHD rear-view video, providing clearer picture quality than ordinary cameras. Note: Rear view camera is not included and must be purchased separately.

AHD Reversing Video display
Demonstration of AHD reversing video quality and a note that the camera is sold separately.

7. Dual System Free Switching

The original car system and the CarPlay menu can be switched freely with one button, allowing seamless transition between interfaces.

Dual system free switching interface
Interface showing the ability to switch between the original car system and the CarPlay system.

8. UI Collection and Third-Party Apps

The system offers various UI styles that can be selected according to your preference. It also supports a wide range of third-party mobile applications.

Various UI styles available on the multimedia screen
A collection of different user interface styles that can be chosen for the display.
Third-party mobile applications supported
The display supports various third-party mobile applications, expanding its functionality.

Troubleshooting

This section addresses common issues and their solutions. For more complex problems, consult a professional.

Common Problems and Solutions

  • Problem: No response to key operation (protocol failure), abnormal display, or "flower screen".
    Reason: Model setting is incorrect.
    Solution: Enter the factory settings to set the correct model. (Settings > Factory Settings > Code: 8866 > Car Setup > Select correct model).
  • Problem: No Bluetooth function.
    Reason: No Bluetooth pairing and connection with mobile phone.
    Solution: Enter the Bluetooth Settings and check the machine name and password.
  • Problem: No video display on the dashcam.
    Reason: The type of dashcam is not chosen correctly.
    Solution: In System Settings > Factory Settings > ARM related Settings > Dashcam Settings, select the correct dashcam type.
  • Problem: No display when reversing.
    Reason: Wrong choice of reversing camera.
    Solution: Enter the Settings inside the reversing Settings, choose the original car or rear mounted camera.
  • Problem: Cannot switch to the factory system interface or display issues after installation.
    Solution: Click "Car Setup" and select the option that matches your vehicle model.
  • Problem: Vehicle's audio does not play or poor sound quality.
    Reason: Failed automatic AUX connection or incorrect audio output settings.
    Solution:
    1. Enter the original car's NBT system, open "Settings", tap "Multimedia", and manually connect the "AUX" output device.
    2. If AUX output is not working or sound quality is poor, switch the output mode on the navigation screen to "Phone". Reconnect to CarPlay. Connect your phone via Bluetooth to the vehicle's built-in system. Go to the "Multimedia" menu in the vehicle's system, locate "External Audio Device", and switch the setting from "AUX" to "Bluetooth". This enables audio-video separation and improves sound quality.
  • Problem: E60 series vehicle knob below the center console does not control navigation/radio.
    Solution: In "Car Setup", select "B" or "C" instead of the default "A" for "006.E60 I-DRIVER" to restore normal functionality.
  • Problem: Blurry, flickering, distorted, or black rearview display.
    Solution: Select the correct display resolution for your rearview camera. Tap "Settings", then "Rearview" to choose the appropriate resolution (1080p or lower). Selecting a resolution higher than what your camera supports will prevent proper display.

System Settings for Troubleshooting

Accessing specific settings can resolve many issues:

  • Adjusting Driver Interaction Mode: In "Car Setup", you can adjust settings related to driver interaction.
  • Setting System Shutdown Time: Navigate to "006.E60 I-DRIVER" > "007.System Power Off Time" to set shutdown behavior (e.g., "Immediately after ACC off" or "after 5 minutes").
  • Setting Temperature Unit: Navigate to "006.E60 I-DRIVER" > "008.Measurement Unit" to select between "Km/H,°C" or "MPH,°F".
Troubleshooting guide for no sound problem with fiber optic and AUX connections
Detailed steps to resolve "No Sound Problem" by connecting the fiber optic cable and setting AUX mode for NBT/CCC/CIC systems.

Specifications

General Specifications
Working VoltageDC 12V
Operating Voltage Range9V~16V
Maximum Working Current3A
Video Part
StandardNTSC, PAL (automatic recognition)
Input1VP-P (75 ohm)
Display Section
Screen Size8.8" / 10.25" / 12.3"
Resolution1280*480P / 1920*720 / 2400*900
Environmental Conditions
Operating Temperature-20°C ~ +70°C
Storage Temperature-30°C ~ +85°C
Working Humidity45% - 80%
Storage Humidity30% - 90%

Support and Further Information

For additional detailed instructions, wiring diagrams, or specific troubleshooting steps not covered in this document, please refer to the official user manual PDF.

The official user manual (PDF) can be accessed via the following link: MEKEDE MN-ZX User Manual PDF.

For technical assistance, please contact your retailer or the manufacturer directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.