1. Introduction
The TERUHAL Smart Wi-Fi Security Camera is a 3MP Full HD intelligent camera designed for home security, offering real-time monitoring, two-way audio, and motion tracking. It supports smooth 2.4G WiFi connection and provides clear, detailed video footage for monitoring babies, pets, or general home surveillance. This manual provides essential information for setting up, operating, and maintaining your camera.
Image 1.1: TERUHAL Smart Wi-Fi Security Camera
2. Safety Information
⚠️ Disclaimer:
Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
3. Product Overview
The TERUHAL Smart Wi-Fi Security Camera offers a range of features for comprehensive surveillance:
- 3MP Full HD Resolution: Provides clear and smooth video.
- 2.4G WiFi Connectivity: Ensures stable and reliable connection.
- Two-Way Audio: Real-time communication with family members or to deter intruders.
- Motion Detection & Alerts: Sends real-time app notifications upon detecting movement.
- Infrared Night Vision: Built-in infrared for clear monitoring even in complete darkness.
- Multiple Storage Options: Supports both SD card storage and cloud storage.
- AP Hotspot Connection: Allows direct connection to the camera without a router for initial setup or local access.
- Remote Monitoring: View live feed and recorded videos from anywhere via the mobile app.
- 108° Wide Viewing Angle: Captures a broad area for better security coverage.
Image 3.1: Key Features Overview
Image 3.2: 1080p Full HD Resolution
4. Setup
4.1 Physical Installation
The camera offers flexible installation options to suit your needs:
- Lay Flat: Place the camera on any flat surface like a table or shelf.
- Wall Mount: Secure the camera to a wall using appropriate mounting hardware (not included).
- Ceiling Mount: Attach the camera to the ceiling for a wider overhead view.
Image 4.1: Installation Methods
4.2 App Installation and Connection
Follow these steps to connect your camera to the mobile application:
- Power On: Connect the camera to a power source using the provided USB cable. The camera will emit a voice prompt indicating it's ready for setup.
- Download App: Download and install the recommended mobile application (e.g., iCam365, iCSee, EseeCloud, Yoosee, H770, V720) from your device's app store.
- Add Device: Open the app and tap the '+' icon to add a new device.
- Grant Permissions: Enable location permissions when prompted by the app to allow it to search for devices.
- Connect to Wi-Fi: Select your 2.4GHz Wi-Fi network and enter the password. Ensure your mobile phone is connected to the same 2.4GHz Wi-Fi network.
- Scan QR Code: The app will display a QR code. Hold the camera's lens towards your phone screen, maintaining a distance of 10-30 cm, until you hear a beep from the camera.
- Network Configuration: Confirm you heard the beep in the app and proceed. The camera will begin configuring the network. This process may take 2-3 minutes. Keep the camera and phone close to the router.
- Device Added: Once successfully added, you will be prompted to set a name for your device. Enter a descriptive name and tap 'Complete'.
- Cloud Storage Activation (Optional): You may be offered a trial for cloud video recording. Follow the on-screen prompts if you wish to activate it.
For a visual guide, please refer to the setup video below:
Video 4.1: Camera Setup and App Connection Guide
5. Operating Instructions
5.1 Live View
After successful setup, open the mobile app and select your camera from the device list to access the live video feed. You can view what's happening at home at a glance.
Image 5.1: Real-time Remote Viewing
5.2 Two-Way Audio
The camera supports two-way voice calls. Tap the microphone icon in the app to speak through the camera, and listen to audio from the camera's location. This allows for real-time communication.
Image 5.2: Two-Way Voice Call
5.3 Motion Detection and Alerts
Enable the motion detection function in the mobile app settings. When movement is detected, the camera will sound an alarm (if enabled) and send real-time notifications to your phone. It can also capture photos and send them via FTP or email.
Image 5.3: Motion Detection Alert
Image 5.4: Motion Detection Alarm
5.4 Recording and Storage
The camera supports both local storage via an SD card (not included) and cloud storage (subscription may be required after trial). You can customize the recording settings within the app, including continuous recording or event-triggered recording. Access recorded footage through the app's playback feature.
Image 5.5: Storage Options
5.5 Night Vision
The camera is equipped with built-in infrared night vision, allowing it to capture clear video footage in low-light or no-light conditions. The night vision mode activates automatically.
Image 5.6: Infrared Night Vision
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the camera lens and body. Do not use harsh chemicals or abrasive cleaners.
- Placement: Ensure the camera is placed in a location where it is protected from extreme temperatures, direct sunlight, and moisture.
- Firmware Updates: Regularly check the mobile app for available firmware updates to ensure optimal performance and security.
- Power Supply: Use only the recommended power adapter (5V) to prevent damage to the device.
7. Troubleshooting
- Camera not connecting to Wi-Fi:
- Ensure your Wi-Fi network is 2.4GHz. The camera does not support 5GHz Wi-Fi.
- Verify the Wi-Fi password is correct.
- Place the camera closer to the Wi-Fi router during setup.
- Reset the camera (refer to the app for specific reset instructions, usually a small button).
- No video feed in the app:
- Check if the camera is powered on and connected to Wi-Fi.
- Ensure your mobile device has a stable internet connection.
- Restart the app or the camera.
- Two-way audio issues (howling/noise):
- If the mobile phone and camera are too close (less than 3 meters), howling may occur. Increase the distance between the devices.
- Check microphone and speaker settings in the app.
- Motion detection alerts not working:
- Ensure motion detection is enabled in the app settings.
- Check app notification permissions on your mobile device.
- Adjust motion sensitivity settings if necessary.
- SD card not recording:
- Ensure the SD card is inserted correctly.
- Format the SD card through the camera settings in the app.
- Check if the SD card is full or corrupted.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Teruhal |
| Model Number | A2 (or A3, depending on sensor size) |
| Style | Cube Camera |
| High Definition | 3.0 Megapixels (3 MP) |
| Connectivity | WIFI (2.4GHz) |
| Lens (mm) | 2.8-12mm, 3.6mm |
| Zoom | 4X Digital Zoom, 4X Optical Zoom |
| Lens Quantity | Single Lens |
| AI Functions | Motion Detection |
| Color Night Vision | No (Infrared Night Vision only) |
| Power Mode | Mains Electricity |
| Power Supply | Normal (5V) |
| Internal Storage | None (External SD card/Cloud storage) |
| Installation | Wall Mounted, Stick, Pendant Mount |
| Color | WHITE |
| Audio Output | Two Way Audio |
| Supported Mobile Systems | Symbian, Windows Mobile, Android, iOS |
| Supported Operating Systems | Various Windows OS (98, XP, Vista, 7, 8, 10, 2000, 2003, 2008), macOS |
| Alarm Type | Telefon Alarm, Local Alarm, FTP Photo, Email Photo |
| Certification | CE, FCC, RoHS |
| Origin | Mainland China |
9. User Tips
- For optimal performance, ensure your camera is placed within a strong 2.4GHz Wi-Fi signal range.
- Consider using a high-quality SD card for local storage to ensure reliable recording.
- Regularly check the app for new features or improvements through firmware updates.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's contact information or the official product website. Keep your purchase receipt as proof of purchase.
