1. Product Overview
The JINGSHA H510M-I is a compact Mini-ITX motherboard designed to support Intel 10th and 11th Generation LGA 1200 CPUs. It features dual-channel DDR4 memory support, a PCIe 4.0 x16 slot, NVMe M.2 and M.2 Wi-Fi ports, multiple USB 3.0 and 2.0 ports, SATA 3.0, and Gigabit LAN. Its robust design includes all solid-state capacitors for enhanced stability and extended service life.


2. Setup and Installation
Before beginning installation, ensure your system is powered off and disconnected from the power source. Handle the motherboard by its edges to avoid static discharge.
2.1 Component Installation
- CPU Installation: Carefully open the LGA 1200 CPU socket lever. Align the CPU with the socket, ensuring the gold triangle on the CPU matches the triangle on the socket. Gently place the CPU into the socket without force, then close the lever to secure it.
- CPU Cooler Installation: Install your LGA 1200 compatible CPU cooler. Connect the CPU fan cable to the 4-pin CPU FAN header (refer to Figure 3).
- Memory (RAM) Installation: Open the clips on both ends of the DDR4 memory slots. Align the memory module with the slot, ensuring the notch on the module matches the key in the slot. Press down firmly on both ends until the clips snap into place. For dual-channel performance, install memory modules in both DDR4 slots.
- M.2 NVMe/NGFF SSD Installation: Locate the M.2 NVMe x4 3.0 port. Insert your M.2 SSD into the slot at an angle, then gently push it down and secure it with the provided screw.
- M.2 Wi-Fi Module Installation: Locate the M.2 Wi-Fi port. Insert your M.2 Wi-Fi module into the slot at an angle, then gently push it down and secure it with the provided screw. (Refer to Figure 4 for M.2 locations).
- PCIe Card Installation: Insert your PCIe 4.0 x16 graphics card or other expansion card into the PCIe slot until it is firmly seated. Secure the card with a screw to your PC case.
- SATA Device Installation: Connect your SATA 3.0 storage devices (HDDs/SSDs) to the 4*SATA3.0 ports using SATA data cables. Connect power from your PSU to these devices.
2.2 Power and Peripheral Connections
- Power Supply Unit (PSU) Connections:
- Connect the 24-pin ATX power connector from your PSU to the 24-pin ATX power socket on the motherboard.
- Connect the 8-pin ATX 12V power connector from your PSU to the 8-pin ATX 12V power socket on the motherboard.
- Ensure your power supply is sufficient for all installed components.
- Front Panel Connections: Connect your PC case's front panel cables (Power SW, Reset SW, Power LED, HDD LED) to the corresponding headers on the motherboard. Refer to Figure 3 for the exact locations.
- USB Connections: Connect your case's front USB 3.0 and USB 2.0 ports to the respective USB 3.0 header (for two USB 3.0 ports) and USB 2.0 header (for two USB 2.0 ports) on the motherboard.
- Audio Connections: Connect your case's front audio panel cable to the Front Audio header.
- Network Connection: Connect an Ethernet cable to the RJ45 port for Gigabit LAN connectivity.
- Video Output: Connect your monitor to either the HD (HDMI) or VGA interface on the rear I/O panel. (Refer to Figure 5).



3. Operating Instructions
After all components are installed and connected, you can power on your system.
- First Boot: Upon the first boot, the system may enter the BIOS/UEFI setup utility automatically. You can also press the designated key (usually DEL or F2) during startup to enter the AMI EFI BIOS.
- BIOS/UEFI Configuration: In the BIOS, you can configure boot order, system time, enable/disable integrated peripherals, and adjust other system settings. Save changes before exiting.
- Operating System Installation: Insert your operating system installation media (USB drive or DVD) and follow the on-screen prompts to install your preferred OS.
- Driver Installation: After OS installation, install the necessary drivers for the chipset, LAN, audio, and any other components. These are typically provided on a driver CD or available for download from the manufacturer's website.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your motherboard.
- Dust Removal: Regularly clean dust from inside your PC case, especially from the motherboard and CPU cooler fins, using compressed air. Ensure the system is powered off and unplugged before cleaning.
- BIOS Updates: Periodically check the JINGSHA support website for BIOS updates. BIOS updates can improve system stability, compatibility, and performance. Follow the update instructions carefully to avoid system damage.
- CMOS Battery: The motherboard uses a CR2032 coin cell battery to retain BIOS settings. If you experience issues with settings not saving, the battery may need replacement.

5. Troubleshooting
- No Power/System Not Starting:
- Verify all power connections (24-pin ATX, 8-pin ATX 12V) from the PSU to the motherboard are securely seated.
- Ensure your power supply unit (PSU) has sufficient wattage to support all installed components.
- Check front panel power switch connection to the motherboard.
- No Display Output:
- Ensure your monitor is connected to the correct video output (HD or VGA) on the motherboard or dedicated graphics card.
- Reseat the graphics card (if applicable) and memory modules.
- Try booting with only one memory stick installed.
- System Instability/Crashes:
- Check CPU and GPU temperatures to ensure they are within safe operating limits.
- Verify memory modules are correctly installed and compatible.
- Ensure all drivers are up to date.
- Resetting BIOS Settings: If you encounter issues after changing BIOS settings, you can clear the CMOS. Power off the system, unplug it, and locate the CLR_CMOS header (refer to Figure 3). Short the two pins with a jumper cap for a few seconds, or remove the CMOS battery for 1-2 minutes, then reinstall.
6. Specifications
Detailed technical specifications for the JINGSHA H510M-I Motherboard.

| Feature | Specification |
|---|---|
| Model | JINGSHA H510M-I |
| Form Factor | Mini-ITX, 170mm x 170mm |
| Chipset | Intel PCH H470 |
| CPU Socket | LGA 1200 (Supports Intel 10th/11th Gen CPUs) |
| Memory Type | 2* DDR4 slots, 2133/2400/2666/2933/3200MHz, Dual-channel, up to 2*32GB (64GB total) |
| PCIe Slots | 1* PCIe 4.0 x16 |
| Storage | 4* SATA 3.0, 1* M.2 NVMe x4 3.0 port (or M.2 SATA 3.0) |
| USB Ports | 4* USB 3.0 Gen1, 6* USB 2.0 |
| LAN | RTL8111F 1000Mbps Gigabit Network |
| Wi-Fi | 1* M.2 Wi-Fi port (supports Wi-Fi + BT modules) |
| Audio | ALC897 HD Audio Chip |
| BIOS | AMI EFI BIOS |
| Power Solution | ATX 24PIN + ATX 8PIN Power Supply |
| Other Headers | 1* 4pin CPU FAN, 1* 4pin SYS FAN, 1* Front Audio, 1* RS232 COM, 1* USB3.0 header (for two USB3.0), 1* USB2.0 header (for two USB2.0), 1* CLR-CMOS, 1* Speaker, 1* AUTO_ON |
7. User Tips
- Power Supply: Always ensure your power supply unit (PSU) is robust enough to handle the power demands of your CPU, GPU, and other components. An underpowered PSU can lead to system instability or failure to boot.
- Component Compatibility: Double-check the compatibility of your CPU, RAM, and M.2 devices with the H510M-I motherboard before installation to prevent issues.
- BIOS Settings: If you are new to BIOS settings, make small changes one at a time and test for stability. If issues arise, use the CLR_CMOS function to revert to default settings.
8. Warranty and Support
The JINGSHA H510M-I motherboard typically comes with a 3-year warranty. For any product-related issues or technical support, please contact your retailer or the manufacturer directly.
8.1 Customer Service Process
If you encounter any problems with your product, please follow these steps:

- Receiving Package: Upon receiving your package, carefully inspect it.
- Checking: Check the contents against your order.
- No Damage: If there is no damage and everything is correct, sign for the package.
- Goods in Question: If you find any goods in question or damage, do not sign for the package immediately.
- Take Videos: Take clear photos and videos of the issue as evidence.
- Solve the Problem: Contact customer support with your evidence to resolve the problem.