Trumpeter 80112 Russian T-72B Minesweeper Tank

Contents

Trumpeter 80112 1/35 Scale Russian T-72B Minesweeper Tank Assembly Model Instruction Manual

Model: 80112

1. Introduction

This manual provides comprehensive instructions for the assembly of the Trumpeter 80112 1/35 Scale Russian T-72B Minesweeper Tank model kit. This highly detailed static model is designed for adult hobbyists and collectors. Please read all instructions carefully before beginning assembly.

Box art of the Trumpeter 80112 Russian T-72B Minesweeper Tank model kit

Figure 1.1: Product Box Art - Trumpeter 80112 Russian T-72B Minesweeper Tank.

2. Safety Information

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Keep small parts away from children under 3 years old to prevent choking hazards.
  • Use appropriate ventilation when painting or using adhesives.
  • Always use sharp tools with caution.

3. Package Contents

Verify that all components are present before starting assembly. The kit typically includes:

  • Plastic sprues with various tank parts
  • Individual track links or rubber band tracks
  • Photo-etched parts (if applicable)
  • Decals
  • Instruction booklet (this manual)
Sprues containing various plastic parts for the T-72B model kit

Figure 3.1: Example of plastic sprues included in the kit.

Tank hull and tracks components

Figure 3.2: Main hull and track components.

4. Setup and Assembly

This model is an assembly kit. The following general steps and tools are recommended:

  • Plastic cement (model glue)
  • Hobby knife or sprue cutters
  • Tweezers
  • Sandpaper or sanding sticks
  • Paint and brushes (optional, for customization)
  • Masking tape (optional)

4.2 Assembly Steps

  1. Part Preparation: Carefully remove parts from the sprues using sprue cutters or a hobby knife. Clean any excess plastic (flash) with a hobby knife or sandpaper.
  2. Sub-Assembly: Follow the numbered steps in the included diagrammatic instructions (not provided in this text manual) to assemble smaller sections first, such as the turret, chassis, and mine roller components.
  3. Main Assembly: Attach the sub-assemblies to the main hull. Ensure proper alignment before applying glue.
  4. Tracks: Assemble the track links according to the kit's specific instructions. If rubber band tracks are provided, fit them around the road wheels and drive sprockets.
  5. Details: Add smaller details, such as antennae, machine guns, and tools, as indicated in the diagrams.
  6. Painting and Decals (Optional): Once assembly is complete and glue has dried, you may paint the model using appropriate model paints. Apply decals as desired after painting.
Illustration of the Russian T-72B Tank with KMT-5 Mine Roller

Figure 4.1: Illustrated view of the completed T-72B Minesweeper Tank.

Assembled model of the T-72B Minesweeper Tank, front view

Figure 4.2: Front view of an assembled and painted model.

Assembled model of the T-72B Minesweeper Tank, rear-side view

Figure 4.3: Rear-side view of an assembled and painted model.

5. Operating and Display

This is a static display model and is not designed for functional operation or rough play. Once assembled, it can be placed on a shelf, desk, or diorama for exhibition.

  • Handle the model with care to avoid damaging delicate parts.
  • Avoid exposing the model to direct sunlight or extreme temperatures, which can cause plastic to warp or paint to fade.
  • Keep the model away from dust and moisture.

6. Maintenance

To maintain the appearance of your model:

  • Dusting: Use a soft brush (e.g., a clean makeup brush or soft paintbrush) or compressed air to gently remove dust. Avoid wiping with cloths that might snag small parts.
  • Cleaning: For stubborn dirt, lightly dampen a cotton swab with water or a mild, non-abrasive cleaner (test on an inconspicuous area first) and gently clean the affected spot. Avoid harsh chemicals.
  • Repairs: If parts become detached, re-glue them using plastic cement.

7. Troubleshooting

Common issues encountered during model assembly and their solutions:

  • Parts not fitting: Ensure all flash is removed from the parts. Lightly sand edges if necessary. Double-check part numbers against the instructions.
  • Gaps between parts: Use plastic filler putty to fill gaps, then sand smooth before painting.
  • Decals not adhering: Ensure the surface is clean and smooth. Use decal setting solutions to help decals conform to irregular surfaces and adhere better.
  • Paint issues: Ensure surfaces are clean and dry before painting. Apply paint in thin coats to avoid brush marks or loss of detail. Allow each coat to dry thoroughly.

8. Specifications

AttributeDetail
Model Number80112
Vehicle TypeTANK (Russian T-72B Minesweeper)
Scale1:35
ThemeVehicle
MaterialPlastic
Is ElectricNo
Recommended Age14+ years, 18+ years
OriginMainland China
Package Length32 cm
Package Width23 cm
Package Height10 cm
Package Weight1.0 kg

9. User Tips

  • Patience is Key: Take your time with each step of the assembly. Rushing can lead to mistakes and frustration.
  • Test Fit Parts: Before applying glue, always test fit parts to ensure they align correctly. This helps identify and resolve fit issues early.
  • Customization: The model is designed for customization. Consider painting and weathering techniques to achieve a realistic finish.
  • Reference Materials: For advanced detailing, consult historical photos or technical drawings of the Russian T-72B Minesweeper Tank.

10. Support

For any questions regarding missing parts, assembly difficulties, or product defects, please contact the seller or manufacturer directly for assistance. Provide your model number (80112) and a detailed description of the issue.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.