BAOFENG Bluetooth Programmer

Contents

Baofeng Wireless Bluetooth Programmer Instruction Manual

Model: Bluetooth Programmer | Brand: BAOFENG

Introduction

This manual provides instructions for the Baofeng Wireless Bluetooth Programmer, a device designed to simplify the programming of compatible Baofeng walkie-talkies using a mobile application. It eliminates the need for traditional PC-based programming cables, offering a convenient and portable solution for managing your radio's settings.

Baofeng Wireless Bluetooth Programmer connected to a walkie-talkie
The Baofeng Wireless Bluetooth Programmer connected to a compatible walkie-talkie for mobile app programming.

Key Features

  • One-click Repeater Import: Easily import nearby repeater configurations into your radio.
  • Plug-in and Use: No complex drivers or software installation required, just a mobile app.
  • Wide Compatibility: Supports a broad range of popular Baofeng radios.
  • Wireless App Programming: Seamlessly pair with the Ola Radio app via Bluetooth for cable-free programming.
  • Quick & Beginner-Friendly Setup: Connect in seconds with one-touch pairing.
  • USB-C Rechargeable: Built-in battery with USB-C charging for convenience.
  • Compact and Portable: Lightweight, pocket-sized design for easy transport.
Comparison of wired PC programming versus wireless app programming
Comparison highlighting the convenience of wireless app programming over traditional wired PC programming.

Setup Instructions

  1. Download the App: Search for "Ola Radio" in your mobile app store (available for Android and iOS systems) and download the application.
  2. Connect the Programmer: Insert the wireless programmer into the K-type interface of your Baofeng walkie-talkie. Ensure it is firmly seated.
  3. Power On: Turn on your walkie-talkie. The programmer itself has an internal battery and will power on automatically or via its switch.
  4. Open the App and Enable Services:
    • Ensure your mobile device's mobile data or Wi-Fi, Bluetooth, and GPS are enabled.
    • Open the "Ola Radio" app.
    • Register or log in to your account.
    • Select your walkie-talkie model within the app.
    • Search for the device and initiate a pairing connection.
    • Click "Connect" in the app when prompted.
    • Once the connection window appears, click "Read" to establish communication.

Important: The walkie-talkie only needs to be switched on; all other operations are performed within the Ola Radio app.

Ola Radio app programming steps 1 through 6
Visual guide for connecting the programmer and walkie-talkie to the Ola Radio app, showing steps from app download to parameter modification.
Wireless programmer installation demonstration on a walkie-talkie
Demonstration of how to correctly insert the wireless programmer into the walkie-talkie's K-type port.

Operating Instructions

After successfully connecting the wireless programmer to your walkie-talkie via the Ola Radio app, you can perform various programming and management tasks:

  • Modify Data and Management:
    • Return to the app's home page after a successful connection to view the walkie-talkie's current parameters.
    • Click into the programming section to modify walkie-talkie parameters, view stored programming schemes, and apply programs.
  • Import Local Repeater: Use the one-click feature to import nearby repeater configurations into your radio, enhancing communication range.
  • Location Service Module: If supported by your radio model and app version, click to enter the location service module to create groups, manage members, and view location information.

Maintenance

To ensure the longevity and optimal performance of your Baofeng Wireless Bluetooth Programmer, follow these maintenance guidelines:

  • Charging: The programmer features a built-in rechargeable battery with a USB-C port. Use a standard USB-C cable and a compatible charger (e.g., USB wall adapter, computer USB port, power bank, car charger) to recharge the device. A red indicator light typically signifies charging, while a green light indicates charging is complete.
  • Cleaning: Wipe the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Storage: Store the programmer in a cool, dry place away from direct sunlight, extreme temperatures, and moisture.
  • Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts.
Type-C port charging methods for the wireless programmer
Diagram illustrating various methods for charging the wireless programmer via its Type-C port, including USB, computer, power bank, and car charger.

Troubleshooting

If you encounter issues while using your wireless programmer, refer to the following common problems and their solutions:

1. Failed to connect radio and APP

  • Solution 1: Ensure your mobile phone's Bluetooth is turned on, and then click "Connect BT" again within the Ola Radio app.
  • Solution 2: Check if the Bluetooth programmer is securely inserted into the K-Plug of your walkie-talkie. Push it tightly if loose. Also, verify that the programmer itself is powered on.

2. Successfully connected, but read failure?

  • Solution 1: After a successful connection, you must select the corresponding brand and model of your walkie-talkie within the app before attempting to read or write data.
  • Solution 2: The walkie-talkie must remain powered on throughout the programming process.
  • Solution 3: Try restarting the programmer and re-selecting your walkie-talkie model in the app.

Specifications

AttributeDetail
Item TypeWireless Programmer
Brand NameBAOFENG
ModelBluetooth Programmer
OriginMainland China
CertificationEPA, Dot, CE, RoHS, UL, FCC, GMP, pse, KC, EAC, TGA, weee
Original100% Baofeng Original
Adapted SystemiOS, Android
Connector B Type (To Connect PC or Mobile Phone)Bluetooth
Connector A Type (To Connect Walkie Talkie)K Plug
Length/Effective DistanceBelow 1.5m
Programming AppOla Radio
Battery IncludedYes
FeaturesCompact and Portable
Package Weight0.1 kg
Package Dimensions (L x W x H)12 cm x 5 cm x 5 cm

Compatible Walkie Talkie Models:

  • DM-32UV, UV-5RM, BF-1909D, BF-V4D, BF-K5 Plus
  • UV-5RH, BF-1904D, BF-889D, BF-V1D, UV-5Rmini
  • UV-5R, RD-55Pro, UV-5RX, BF-V12D, BF-888S, BF-1901D
  • AT2, UV-8D, UV-5RHUP, BF-T20D

For other models, please contact customer support to confirm compatibility.

Grid showing various compatible Baofeng walkie-talkie models
Visual representation of multiple Baofeng walkie-talkie models compatible with the wireless programmer.
Dimensions of the wireless programmer
Detailed dimensions of the wireless programmer, showing its compact size.

User Tips

  • Always ensure the "Ola Radio" app you download matches the visual representation in the manual to avoid using unofficial or incompatible software.
  • For optimal performance and stable connection, ensure your mobile device's Bluetooth and GPS are active during the programming process.
  • The wireless programmer is designed for portability; take advantage of its compact size for on-the-go programming, especially useful for field operations or ham radio events.

Warranty and Support

The manufacturer promises 100% inspection of quality, specification, and quantity before delivery.

Warranty Information:

  • ONE YEAR warranty for the wireless programmer body.
  • THREE MONTHS warranty for the battery, charger, and other accessories included with the programmer.

If you are unsure about the compatibility of your specific walkie-talkie model or require further assistance, please contact customer support.

Package Contents

The package includes the following items, depending on your selection:

  • 1 x Wireless Programmer
  • 1 x Type-C Cable
  • 1 x User Manual
  • (Alternatively, if you chose the 2-piece set):
  • 2 x Wireless Programmer
  • 2 x Type-C Cable
  • 2 x User Manual
Image showing the contents of the product package
Contents of the package, including the wireless programmer, Type-C cable, and user manual.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.