1. Introduction
The ATK GHOST Wireless Gaming Mouse is a high-performance peripheral designed for PC gaming, featuring a lightweight carbon fiber hollow design, multiple connectivity options (wired, 2.4G wireless, Bluetooth), and customizable RGB lighting. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your ATK GHOST mouse.
2. Safety & Warnings
- General Warning: Not suitable for children under 36 months.
- Lithium Battery & Button Battery Warning: Keep out of reach of children. In case of ingestion, seek medical attention immediately. Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion.
- Fire Risk: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.
- Environmental Conditions: Do not immerse the product in water or any liquid. Keep away from high temperature, fire, and strong impact.
- Product Integrity: Do not disassemble, repair, or modify the product without permission. Stop using immediately if overheating, smoke, or peculiar smell occurs.
3. Setup
3.1 Before First Use
Check the product and all included accessories for completeness and ensure they are undamaged before use.3.2 Wired Connection
- Connect the USB cable directly to an available USB port on your computer (PC, laptop, or tablet).
- The system will automatically install the necessary drivers. The mouse is plug-and-play for immediate use.
3.3 2.4G Wireless Connection
- Take out the USB receiver (New GEM8K Receiver) and insert it into an available USB port on your device.
- Turn on the mouse power switch. The mouse will automatically pair with the receiver and be ready for use.
3.4 Bluetooth Connection (for Ultimate models)
- Turn on the mouse power switch.
- Long press the pairing button for 3-5 seconds until the indicator light flashes quickly, indicating it has entered pairing mode.
- On your connected device (PC, laptop, or tablet), turn on Bluetooth.
- Search for the mouse name (e.g., "ATK GHOST" or similar) in the list of available devices and click to complete the connection.
3.5 Charging (Rechargeable Wireless Mouse)
- Connect the USB-C charging cable to the mouse's charging port.
- Connect the other end of the cable to a 5V USB power source.
- A red indicator light signifies charging. The light will turn off when fully charged (approximately 1.5 hours for a full charge).
4. Operating Instructions
4.1 DPI Adjustment
Short press the dedicated DPI button on the mouse to cycle through different cursor sensitivity settings. Available options typically include 800, 1200, 1600, 2400, and 3600 DPI. Refer to the specific product buttons for further customization.
4.2 Auto-Sleep Function
To conserve power, the mouse will automatically enter auto-sleep mode after 3 minutes of inactivity. To wake the mouse, simply click any button.
4.3 RGB Lighting
The ATK GHOST mouse features customizable RGB lighting effects. Specific controls for lighting adjustments may be available through the dedicated driver software.
5. Maintenance
- Storage: After use, especially for wireless models, turn off the power switch to save battery. Unplug the USB cable/receiver from the device and store the mouse in a dry and clean place. Avoid humid, high-temperature, or dusty environments for prolonged periods.
- Cleaning: Use a soft, dry cloth to clean the mouse. Do not use harsh chemicals or abrasive materials.
- Battery Disposal: Dispose of the mouse and its battery in accordance with local environmental protection regulations. Do not discard as household waste.
6. Troubleshooting
- Mouse Not Responding:
- For wired connection, ensure the USB cable is securely plugged into both the mouse and the computer.
- For 2.4G wireless, ensure the USB receiver is properly inserted and the mouse power switch is ON.
- For Bluetooth, verify the mouse is in pairing mode and correctly connected via your device's Bluetooth settings.
- Check the battery level for wireless modes and charge if necessary.
- Intermittent Connection/Lag:
- Ensure the receiver is not obstructed and is close to the mouse.
- Avoid using the mouse near other wireless devices that might cause interference.
- Update mouse drivers or firmware via the official ATKGEAR website.
- DPI/Button Issues:
- Ensure the driver software is installed and up-to-date for full customization.
- Reset the mouse to factory settings if custom profiles are causing issues (refer to software instructions).
7. Specifications
| Feature | Soul GHOST Ultimate | Soul GHOST Extreme |
|---|---|---|
| Name | ATK Rayquaza Soul GHOST Series Composite Carbon Fiber Lightweight Hollow Mouse | |
| Color Matching | Black, Silver, Red | Black, Silver, Purple |
| Coating | Brand New Nano-coating | |
| Size (L*W*H) | 121.0*61.3*38.0mm (For medium/small hands) | |
| Sensor | PAW3950Ultra | |
| Main Control Chip | NORDIC 54L15 | NORDIC 54H20 |
| Programme | ATK Self-developed 54 Series "Juesha?MAX" Mouse Solution | |
| Polling Rate | Wired/Wireless Dual 8K | |
| Key Response Delay | 0.181ms | 0.163ms |
| Battery | 300mAh | |
| Battery Life (1000Hz) | 210 Hours | 120 Hours |
| Weight | 48±3g (Weight excludes foot pads and receiver, with ±3g tolerance. Actual product prevails.) | |
| Primary Key | ATK optical blade mechanical micro switch | ATK Custom Optical Switches |
| Scroll Wheel | TTC Gold Wheel | |
| Foot Stickers | Standard white double-layer anti-slip foot pads; Freesgift: White small dot double-layer anti-deformation foot pads (4x4) | |
| Connection Method | Wired/2.4G/Bluetooth | Wired/2.4G |
| Receiver | New GEM8K Receiver | |
| Mouse Switch Brand | Others | |
| Lighting Effect | RGB | |
| Compatible Systems | Windows | |
| Applicable Equipment | PC, Laptop, Tablet PC, Others | |
| Connection Interface Types | USB interface | |
| Support for Driver Software | Yes | |
| Mouse Material | Others (Composite Carbon Fiber) | |
| Applicable Hand Type | Right Hand | |
| Mouse Type | Wired, 2.4G Wireless, Bluetooth | |
| Origin | Mainland China | |
8. User Tips
- For optimal performance and to customize buttons, DPI settings, and RGB lighting, ensure you download and install the latest driver software from the official ATKGEAR website.
- The mouse is ergonomically designed for right-hand users, providing a comfortable grip for various styles (grasp, claw grip, clasp).
- Take advantage of the 8000Hz polling rate for competitive gaming by ensuring your system and software are configured to support it.
9. Warranty & Support
For product-driven downloads, driver software, firmware updates, and other support services, please visit the official ATKGEAR website: WWW.ATKGEAR.COM.
For warranty information and further assistance, please contact the manufacturer or your point of purchase.
