Introduction
This manual provides detailed instructions for assembling, operating, and maintaining your Cada RC Renault building block supercar models. These 1:20 scale models, the Renault 5 Maxi Turbo (C51095W) and the Renault Sport RS. 01 (C51094W), offer both a rewarding building experience and exciting remote-controlled play. The Renault 5 Maxi Turbo is a tribute to the 1985 Corsica Rally champion car, driven by Jean Lagnotti.
Figure 1: Cada RC Renault Supercar Building Blocks - Renault 5 Maxi Turbo and Renault Sport RS. 01
Setup and Assembly
Your Cada RC Renault model is a building block set designed for assembly. Follow the included step-by-step building instructions provided in the product packaging to construct your chosen supercar model. Once the model is built, proceed with the following steps for remote control setup.
1. Remote Control Battery Installation
- Locate the battery compartment on the back of the remote control.
- Open the battery compartment cover.
- Insert two (2) AAA 1.5V batteries, ensuring correct polarity (+/-). Batteries are not included.
- Close the battery compartment cover securely.
Figure 2: Remote Control Battery Installation and Function Labels
2. APP Download and Bluetooth Connection (Optional)
For enhanced control and features, you can connect your model via Bluetooth using the dedicated mobile application.
- Download the App: Search for "CaDA BOT" on the Apple App Store (for iOS devices) or Google Play Store (for Android devices).
- System Requirements: Ensure your device meets the minimum operating system requirements:
- iOS: Version 13.0 or above
- Android: Version 8.0 or above
- Compatibility Note: Some phone models may not be fully compatible with the application. It is highly recommended to test the app's functionality before or during the construction of your model.
- Connect via Bluetooth: Follow the in-app instructions to establish a Bluetooth connection with your assembled model.
Figure 3: APP Download Method and Control Options
Operating Instructions
Your Cada RC Renault supercar can be controlled using the included 2.4GHz remote control or via the CaDA BOT app (if connected via Bluetooth).
1. Remote Control Operation
The remote control features a 2.4GHz interference-free system for reliable operation. Refer to Figure 2 for button identification.
- Power Switch: Turn on the remote control using the designated power switch. Ensure the car model is also powered on (if it has a separate power switch/battery pack).
- Driving Controls: Use the 'Driving' buttons/joystick to move the car forward and backward.
- Steering Controls: Use the 'Steering' buttons/joystick to turn the car left and right.
- Pairing: If the car does not respond, ensure both the car and remote are powered on and attempt to re-pair them according to the specific instructions in your model's building manual.
2. APP Control (Bluetooth)
Once connected via Bluetooth to the CaDA BOT app, you can use your smartphone or tablet to control the vehicle. The app typically offers more advanced control options and programmable functions.
- Open the CaDA BOT app on your device.
- Select your connected model from the app interface.
- Use the on-screen controls to drive and steer your supercar.
- Explore additional features like programming sequences or custom controls within the app.
Maintenance
- Cleaning: To clean your model, gently wipe it with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no water enters electronic components. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the building blocks and assembled model in a cool, dry place away from direct sunlight and extreme temperatures to prevent warping or discoloration of the plastic.
- Battery Care: Always remove batteries from the remote control when the product is not in use for extended periods to prevent leakage and damage.
- Inspection: Periodically check for any loose or damaged parts. Reassemble any detached blocks to maintain the model's integrity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Car does not respond to remote control. | Low or dead remote control batteries; car not powered on; remote and car not paired; interference. | Replace remote control batteries; ensure car's power source is active; re-pair remote and car (refer to building manual); move to an area with less interference. |
| Car moves slowly or erratically. | Low batteries in car's power source (if applicable); loose connections; obstructions in wheels/gears. | Replace/recharge car's batteries; check all block connections; clear any obstructions. |
| Steering is not working correctly. | Steering mechanism incorrectly assembled; obstruction; remote control issue. | Check steering assembly according to manual; clear obstructions; test with APP control if available. |
| APP connection fails. | Bluetooth not enabled; app/OS version incompatibility; car not powered on. | Ensure Bluetooth is on; check OS version (iOS 13.0+, Android 8.0+); ensure car is powered; try restarting app/device. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Cada |
| Models | C51095W Renault 5 Maxi Turbo, C51094W Renault Sport RS. 01 |
| Scale | 1:20 |
| Pieces (Renault 5 Maxi Turbo) | 282 PCS |
| Pieces (Renault Sport RS. 01) | 294 PCS |
| Dimensions (Renault 5 Maxi Turbo) | 18.2 cm (L) x 9.4 cm (W) x 8.2 cm (H) |
| Dimensions (Renault Sport RS. 01) | 21.1 cm (L) x 8.4 cm (W) x 5.4 cm (H) |
| Remote Control | 2.4GHz Interference-free system. Requires 2x AAA 1.5V batteries (not included). |
| APP Control | CaDA BOT App (iOS 13.0+, Android 8.0+) |
| Material | ABS Plastic |
| Recommended Age | 14+ years, 18+ years |
| Certification | CE |
| Origin | Mainland China |
| Approx. Package Dimensions | 38.0 cm (L) x 28.0 cm (W) x 7.5 cm (H) (for both models) |
| Approx. Package Weight | 0.458 kg |
Figure 4: Renault 5 Maxi Turbo (C51095W) Dimensions
Figure 5: Renault Sport RS. 01 (C51094W) Dimensions
User Tips
- Organize Your Build: Before starting assembly, sort your building blocks by color and type. This can significantly speed up the building process.
- Check Connections: During assembly and if experiencing operational issues, ensure all blocks are firmly connected, especially those related to the power and steering mechanisms.
- Fresh Batteries: Always use fresh, high-quality batteries for the remote control to ensure optimal performance and range.
- Test App Early: If you plan to use the CaDA BOT app, download and test its basic connectivity with your device before fully committing to the build, especially if your device is near the minimum OS requirements.
- Build in a Well-Lit Area: Good lighting helps in identifying small parts and following intricate instructions.
Warranty and Support
This product is CE certified, indicating compliance with European safety, health, and environmental protection standards.
For any technical support, missing parts, or warranty inquiries, please contact the manufacturer directly. Refer to the product packaging or the manufacturer's official website for contact information.
Important Safety Information (California Proposition 65 Warning)
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.