ThermoPro TP60C Wireless Indoor/Outdoor Thermometer & Hygrometer

1. Introduction

The ThermoPro TP60C is a wireless digital thermometer and hygrometer designed to help you maintain a comfortable and healthy environment in your home. It provides accurate readings for both indoor and outdoor temperature and humidity, allowing you to monitor conditions at a glance. The remote sensor is built to withstand outdoor elements, including rain, making it versatile for various placements.

2. Package Contents

Please check to ensure all items are present:

• 1 x Main Receiver Unit
• 1 x Wireless Remote Sensor
• 1 x Instruction Manual

Note: Batteries are not included and must be purchased separately.

3. Key Features

• Clear LCD Display: Bold, easy-to-read screen shows current indoor and outdoor temperature and humidity percentages.
• Trend Indicators: Features temperature and humidity percentages with trend indicator arrows, allowing you to anticipate changes.
• Max/Min Records: Displays all-time and 24-hour high and low records for temperature and humidity.
• Wireless Range: Up to 60 meters (200 feet) transmission range between the main unit and remote sensor. (Range may be shorter due to interference).
• Multi-Sensor Support: The main receiver can synchronize with up to 3 remote sensors. (Additional sensors sold separately).
• Outdoor Durability: Remote sensor is designed to withstand rain and outdoor conditions.

4. Setup Guide

4.1. Battery Installation

1. Open the battery compartment on the back of both the main receiver unit and the remote sensor.
2. Insert 2 x AAA batteries into each unit, ensuring correct polarity (+/-).
3. Close the battery compartments securely. The remote sensor's battery compartment has a silicone seal for weather protection.

4.2. Pairing the Units

The main unit and remote sensor should pair automatically once batteries are installed. If they do not pair:

1. Ensure both units are within range (up to 60 meters/200 feet).
2. Press the 'SYNC' button on the back of the main receiver unit.
3. Press the 'CHANNEL' button on the remote sensor to select a channel (1, 2, or 3).
4. The main unit should display the remote sensor's readings.

4.3. Placement

• Main Unit: Place the main receiver unit indoors in a central location, away from direct sunlight, heat sources, or vents. It has a foldable stand for tabletop use or a hanging hole for wall mounting.
• Remote Sensor: Place the remote sensor outdoors or in another room you wish to monitor. Ensure it is within the 60-meter (200-foot) wireless range of the main unit. While the sensor is rain-resistant, placing it under an overhang or in a sheltered spot can prolong its lifespan.

5. Operating Instructions

5.1. Reading the Display

• OUT: Displays the outdoor temperature and humidity from the remote sensor.
• IN: Displays the indoor temperature and humidity from the main unit.
• Trend Indicators: Arrows indicate whether temperature or humidity is rising, falling, or remaining stable.

5.2. Switching Temperature Units (°F/°C)

Press the '°F/°C' button on the back of the main unit to switch between Fahrenheit and Celsius.

5.3. Viewing MAX/MIN Records

• Press the 'MAX/MIN' button once to view the highest recorded temperature and humidity for both indoor and outdoor.
• Press the 'MAX/MIN' button again to view the lowest recorded temperature and humidity.
• Press a third time to return to current readings.

5.4. Clearing MAX/MIN Records

While viewing MAX/MIN records, press and hold the 'CLEAR' button for 3 seconds to clear the recorded values. The records will also reset every 24 hours automatically.

5.5. Channel Selection (for multiple sensors)

If you have multiple remote sensors, press the 'CHANNEL' button on the back of the main unit to cycle through the channels (CH1, CH2, CH3) and view readings from each sensor.

6. Specifications

7. Troubleshooting

• No readings or '---' on display:
  • Check if batteries are installed correctly and have sufficient power. Replace if necessary.
  • Ensure the remote sensor is within the wireless range of the main unit.
  • Press the 'SYNC' button on the main unit and the 'CHANNEL' button on the remote sensor to re-establish connection.
• Inconsistent readings between units:
  • While the units are designed for accuracy, minor differences (e.g., 0.5°C) can occur and are often within the product's tolerance range.
  • Ensure both units are placed in similar conditions for comparison (e.g., side-by-side in the same room for an hour).
• Connection with sensor disappears:
  • This can sometimes be resolved by removing and reinserting the batteries in both the main unit and the remote sensor.
  • Ensure there are no major obstructions or sources of interference (e.g., large metal objects, other wireless devices) between the units.
• Low Battery Indicator: The display will show a low battery icon when batteries need to be replaced in either the main unit or the remote sensor.

8. User Tips

• The main unit can support up to three remote sensors, allowing you to monitor multiple locations simultaneously. Additional sensors must be purchased separately.
• The larger temperature display on the main unit typically shows the outdoor temperature and cannot be switched to display the indoor temperature predominantly.
• The display is not backlit, so ensure adequate lighting for viewing.
• The outdoor remote sensor's battery compartment features a sealing strip for enhanced weather protection.
• For optimal outdoor sensor performance and longevity, consider placing it in a sheltered location, such as under an eave or porch, even though it is rain-resistant.

9. Warranty & Support

ThermoPro offers exceptional value through high quality, reliability, and proven support. The product comes with lifetime support.

9.1. Customer Service

For customer service inquiries, please contact ThermoPro directly:

• USA & Canada: 1-877-515-7797
• Germany (DE): 49-215-493-19011
• United Kingdom (UK): 44-808-164-1683
• Australia (AU): 61-180-057-7492
• Email: service@buythermopro.com

9.2. Item Guides & Documents

A detailed user manual in PDF format is available for download. Please refer to the 'Item guides & documents' section on the product page for the link.