NEEWER ST013

Contents

NEEWER Basics Overhead Phone Mount Holder Stand Instruction Manual

Model: ST013

1. Product Overview

The NEEWER Basics Overhead Phone Mount Holder Stand (Model ST013) is a versatile and economical solution designed for content creators, vloggers, and anyone needing a flexible phone mounting solution for desktop use. It features adjustable height, angle, and rotation, ensuring optimal positioning for various filming and viewing needs.

NEEWER Basics Overhead Phone Mount Holder Stand clamped to a desk

Image: NEEWER Basics Overhead Phone Mount Holder Stand in use, clamped to a desk.

2. Package Contents

The package includes the following items:

  • 1 x Desktop Phone Stand (Model ST013)
Diagram showing the Desktop Phone Stand and its components

Image: Diagram illustrating the Desktop Phone Stand and its included components.

3. Setup and Assembly

Follow these steps to assemble and set up your phone mount holder stand:

3.1 Attaching to a Desk

  1. Identify the C-clamp base of the stand.
  2. Place the C-clamp onto the edge of your desk. Ensure your desk thickness is up to 2.4 inches (6 cm).
  3. Tighten the C-clamp securely by turning the screw knob clockwise until the stand is firmly attached to the desk. The non-slip rubber pads on the clamp will help ensure stability.
Diagram showing the C-clamp base attached to a desk, with dimensions and non-slip pads

Image: The C-clamp base securely attached to a desk, highlighting its maximum desk thickness compatibility (2.4" / 6cm) and non-slip rubber pads.

3.2 Adjusting the Telescoping Rod

  1. Locate the "Telescopic Rod Locking knob".
  2. Turn the "Telescopic Rod Locking knob" counter-clockwise to loosen it.
  3. Adjust the length of the telescoping rod to your desired height. The stand adjusts vertically from 11.8 inches (30 cm) to 16.5 inches (42 cm).
  4. Once the desired height is reached, turn the "Telescopic Rod Locking knob" clockwise to secure the rod.
Diagram showing adjustable height of the phone stand from 11.8 to 16.5 inches (30-42cm)

Image: The phone stand demonstrating its adjustable height range (11.8"-16.5" / 30-42cm) and horizontal extension arm.

3.3 Adjusting the Clamp and Support Bracket

  1. Clamp Angle Adjustment: Turn the "Clamp Knob" counter-clockwise to loosen it. Adjust the angle of the phone clamp as needed. Once set, turn the "Clamp Knob" clockwise to lock it.
  2. Support Bracket Angle Adjustment: Turn the "Fine Adjustment Knob" counter-clockwise to loosen it. Adjust the angle of the support bracket to achieve your desired phone position. Once set, turn the "Fine Adjustment Knob" clockwise to lock the bracket.
  3. The horizontal extension arm can extend from 15.4 to 19.7 inches (39 to 54.4 cm).
  4. The phone holder supports 360° rotation and 180° tilt for versatile angle adjustments.
Diagram showing 360 degree rotation and 180 degree tilt capabilities of the phone holder

Image: Detailed diagram illustrating the 360° rotation and 180° tilt features of the phone holder, along with the horizontal extension range.

3.4 Inserting Your Phone

  1. The phone holder features a spring-loaded clamp. Gently pull apart the clamp to open it.
  2. Insert your smartphone into the clamp. The clamp is compatible with phones ranging from 2.4" to 3.4" (6 to 8.5 cm) in width.
  3. Ensure your phone is securely held by the silicone pads within the clamp.
Close-up of the phone clamp with dimensions and silicone pads

Image: Close-up view of the spring-loaded phone clamp, showing its width compatibility (2.4"-3.4" / 6-8.5cm) and protective silicone pads.

4. Operating Instructions

Once assembled and your phone is securely mounted, you can begin using the stand for various applications. The flexible design allows for versatile positioning.

  • Overhead Filming: Position the horizontal arm and phone holder directly above your workspace for top-down shots.
  • Desktop Viewing: Adjust the height and angle for comfortable viewing during video calls, online meetings, or media consumption.
  • Creative Angles: Utilize the 360° rotation and 180° tilt to achieve unique perspectives for photography and videography.
Collage of different usage scenarios for the phone mount, including overhead, desk, and bed use

Image: A collage showcasing the phone mount in various practical scenarios, such as overhead filming, desk setup, and comfortable viewing in bed.

Product Showcase Video

Video: A brief product showcase demonstrating the NEEWER Basics Overhead Phone Mount Holder Stand and other NEEWER products.

5. Maintenance

To ensure the longevity and optimal performance of your NEEWER Basics Phone Mount Holder Stand, please follow these maintenance guidelines:

  • Cleaning: Clean the product with a soft, damp cloth and a mild detergent periodically. After cleaning, dry it thoroughly with a clean, dry cloth.
  • Storage: If the product will not be used for an extended period, store it in a clean, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting and Safety Warnings

Please observe the following warnings and troubleshooting tips to prevent damage and ensure safe operation:

  • Load Capacity: Do not exceed the maximum load capacity of this product during use. Overloading can cause instability and damage.
  • Disassembly: Do not attempt to disassemble the product. Unauthorized modifications can void the warranty and cause malfunction.
  • Secure Knobs: Always ensure that all adjustment knobs are securely tightened before and during use to prevent accidental movement or collapse.
  • Stable Environment: Do not use the product in an unstable environment, such as on uneven surfaces or where it could be easily knocked over.
  • Installation/Removal Stability: Ensure the product is stable when installing or removing your device to prevent accidental drops or damage.

7. Specifications

Feature Detail
Brand NEEWER
Model Number ST013
Item Type Desktop Phone Stand / Professional Tripod
Use Smartphones
Material Aluminum, Metal, Plastic
Origin Mainland China
Weight 720 g (0.72 kg)
Vertical Adjustment Height 11.8" - 16.5" (30 cm - 42 cm)
Horizontal Extension Arm Length 15.4" - 19.7" (39 cm - 54.4 cm)
Rotation 360°
Tilt 180°
Phone Clamp Width 2.4" - 3.4" (6 cm - 8.5 cm)
C-Clamp Desk Thickness Up to 2.4" (6 cm)
Mounting Points Phone Clamp, 1/4" screw hole, 3/8" screw hole, A-clamp edges
Package Dimensions (L x W x H) 49 cm x 10 cm x 5 cm

8. Warranty and Support

NEEWER provides a 1-year warranty for this product. For any questions or support, please contact NEEWER customer service:

  • Email: vip@neewer.com
  • US Customer Service: +1 732-623-9777
  • UK Customer Service: +44 (0) 3330113494
  • Website: www.neewer.com

A detailed user manual in PDF format is also available for download:

Download User Manual (PDF)

9. User Tips

  • Optimal Stability: For maximum stability, ensure the C-clamp is fully tightened and placed on a sturdy, flat desk surface.
  • Cable Management: When using your phone for extended periods, consider using small cable clips to manage charging cables and prevent them from interfering with your setup.
  • Versatile Positioning: Experiment with different height, tilt, and rotation settings to find the perfect angle for your specific content creation needs, whether it's for overhead cooking videos, desk vlogging, or casual viewing.
  • Accessory Compatibility: The base includes 1/4" and 3/8" screw holes, allowing you to attach additional accessories like small lights or microphones for enhanced production quality.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.