UGREEN BT505

Contents

UGREEN BT505 Bluetooth Audio Receiver

Model: BT505

Instruction Manual

1. Introduction

The UGREEN BT505 is a high-fidelity Bluetooth audio receiver designed to upgrade your existing audio systems with wireless capabilities. Featuring Bluetooth 6.0 and LDAC decoding, it delivers enhanced audio performance, allowing you to stream high-resolution audio wirelessly from your devices to speakers, amplifiers, or car audio systems. It supports dual audio interfaces (3.5mm AUX and 2RCA) for wide compatibility and offers a stable connection with a long transmission range.

UGREEN BT505 Bluetooth Receiver with Hi-Res Audio Wireless logo
The UGREEN BT505 Bluetooth Audio Receiver, certified for Hi-Res Audio Wireless.

2. Package Contents

Please check the package to ensure all items are present:

  • UGREEN BT505 Bluetooth Audio Receiver
  • 1m USB-A to C Charging Cable
  • 1m 3.5mm Male to Male Audio Cable / HLG (may vary)
  • Instruction Manual (this document)
Packaging display of UGREEN BT505 Bluetooth Audio Receiver
The retail packaging for the UGREEN BT505 Bluetooth Audio Receiver.

3. Device Overview

Diagram showing key usage instructions and ports on the UGREEN BT505
Key components of the UGREEN BT505: Working status indicator light, Multi-function button, Charging status indicator, 3.5mm AUX port, RCA L/R ports, USB-C power input.
  • Multi-function Button: Central button for power, play/pause, and pairing.
  • Working Status Indicator Light: Displays current operational status and encoding.
  • Charging Status Indicator: Indicates battery charging status.
  • 3.5mm Audio Port (AUX): For connecting to audio devices via 3.5mm cable.
  • RCA Left and Right Channels: For connecting to audio devices via RCA cables.
  • USB-C Power Supply Port: For charging the device.
Diagram of 3.5mm and 2RCA dual audio interfaces on the UGREEN BT505
The UGREEN BT505 features both 3.5mm AUX and 2RCA audio output ports for broad compatibility.

4. Setup Instructions

  1. Connect to Audio Device: Connect the BT505 to your speaker, amplifier, or car audio system using either the 3.5mm audio cable or the 2RCA audio cable. Ensure the cables are securely plugged into the correct input ports on your audio device.

  2. Power On: Connect the BT505 to a 5V power source using the provided USB-A to C charging cable. The device can be used while charging.

  3. Enter Pairing Mode: Press and hold the circular multi-function button at the top of the device for 3 seconds. The red and blue indicator lights will flash alternately, indicating that the device is in pairing mode.

  4. Pair with Your Phone/Tablet: On your mobile phone or tablet, open the Bluetooth settings. Search for "UGREEN-BT505" in the list of available devices and tap to connect.

  5. Start Playback: Once successfully connected (blue light blinks every 10 seconds), open your preferred music player on your device and start playing audio. The BT505 will receive the Bluetooth signals and transmit them to your connected audio system.

Four simple steps to connect the UGREEN BT505 Bluetooth receiver
Visual guide for connecting the UGREEN BT505: Connect cables, enter pairing mode, connect via phone, and play music.

5. Operating Instructions

5.1 Multi-function Button Operations

  • Short Press: Play/Pause music.
  • Double-tap: Force pairing mode.
  • Long Press (3 seconds): Power on/off.
  • Long Press (10 seconds): Clear device pairing list.

5.2 Indicator Light Status

Table detailing battery status, multi-function button, and working status indicator light functions
Detailed explanation of the indicator lights and button functions.
  • Low Battery Indicator: Red light flashes every 10 seconds.
  • Charging: Red light stays on.
  • Charging Complete: Red light turns off.
  • Power On: Blue light stays on for 1 second.
  • Power Off: Red light stays on for 1 second.
  • Pairing Status: Red and blue lights flash alternately.
  • Pairing Successful: Blue light blinks every 10 seconds.
  • Encoding Indicator:
    • SBC: Cyan
    • AAC: Blue
    • LDAC: Green

5.3 Multi-device Connection (One Drag Two Function)

The BT505 supports connecting to two phones simultaneously, allowing you to switch between music sources freely. This feature enables unlimited listening as you move between devices.

Text: Support one drag two function, Switch freely for unlimited listening
The BT505 allows simultaneous connection to two devices for seamless music switching.

5.4 Receiving Mode

The BT505 acts as a receiver, allowing you to connect various audio players (mobile phones, tablets, notebooks) to different audio output devices (audio/amplifiers, ordinary headphones, car audio) to play music wirelessly.

Diagram illustrating the receiving mode of the UGREEN BT505, connecting various source devices to output devices
The BT505 in receiving mode, connecting source devices like phones and tablets to output devices such as speakers, headphones, and car audio.

6. Maintenance

  • Keep the device dry. Avoid exposure to moisture or liquids.
  • Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Store the device in a cool, dry place when not in use.
  • Battery Charging: The BT505 features a high-capacity Li-ion battery. Charge for approximately 2 hours for up to 15 hours of playback. It supports Type-C fast charging and can be used while charging.
Image highlighting the 300mAh high-capacity Li-ion battery, with 2h charge for 15h play time
The BT505 is equipped with a 300mAh battery, offering extended playback after a quick charge.

7. Troubleshooting

  • No Power: Ensure the device is charged or connected to a 5V power source. Check the charging status indicator.
  • Cannot Pair:
    • Ensure the BT505 is in pairing mode (red and blue lights flashing alternately).
    • Make sure Bluetooth is enabled on your source device.
    • Try clearing the device pairing list on the BT505 (long press multi-function button for 10 seconds) and re-attempt pairing.
    • Ensure the BT505 is within the 10-meter transmission range of your source device.
  • No Sound:
    • Verify that the audio cables are correctly connected between the BT505 and your audio system.
    • Check the volume levels on both your source device and the connected audio system.
    • Ensure the BT505 is successfully paired and connected (blue light blinks every 10 seconds).
  • Poor Audio Quality:
    • Ensure your source device supports LDAC for the highest quality audio. The working status indicator will show green for LDAC.
    • Reduce the distance between the BT505 and your source device, and remove any obstacles that might interfere with the signal. The BT505 offers up to 10m long-range transmission.
    • Avoid strong electromagnetic interference.
Diagram showing 10m long-range transmission capability of the UGREEN BT505
The BT505 provides stable transmission up to 10 meters without obstacles.

8. Specifications

Product Parameters
Parameter Detail
Product Name Bluetooth Audio Receiver
Brand UGREEN
Model Number BT505
Bluetooth Version 6.0
Power Supply Method Lithium battery
Battery Capacity 300mAh
Charging Cable 1m USB-A to C charging cable
Audio Cable 1m 3.5mm male to male audio cable / HLG
Shell Material PC+ABS
Working Distance Approximately 10 meters
Including Packaging Weight 44g
Repair/Warranty One year
Packaging Fashion Color Box
Product parameters table for UGREEN BT505
Detailed product parameters for the UGREEN BT505.

Dimensions

Diagram showing dimensions of the UGREEN BT505: 71mm x 66.5mm x 24mm
Dimensions of the UGREEN BT505: 71mm (length) x 66.5mm (width) x 24mm (height).

9. User Tips

  • Revitalize Old Audio Systems: Use the BT505 to instantly transform your traditional wired speakers or amplifiers into Bluetooth-enabled devices, extending their lifespan and utility.
  • Seamless Device Switching: Take advantage of the 'one drag two' function to connect both your phone and tablet simultaneously, allowing for quick and easy switching between music sources without re-pairing.
  • Optimal Audio Quality: For the best sound experience, ensure your streaming device supports LDAC encoding. The BT505's green indicator light will confirm LDAC is active.
  • Placement for Best Range: While the BT505 offers a 10m range, placing it in an open area with minimal obstructions between it and your source device will ensure the most stable and consistent connection.
Images showing old speakers and amplifiers being used with the UGREEN BT505 to become Bluetooth enabled
The BT505 can instantly upgrade old speakers and amplifiers to support Bluetooth audio.

10. Warranty and Support

The UGREEN BT505 Bluetooth Audio Receiver comes with a one-year repair warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or UGREEN customer service through their official channels. Provide your product model (BT505) and a detailed description of the issue for faster service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.