SMAILWOLF M3Pro Bluetooth Wireless Mouse User Manual

1. Introduction

Thank you for choosing the SMAILWOLF M3Pro Bluetooth Wireless Mouse. This manual provides detailed instructions for setup, operation, and maintenance to ensure you get the best experience from your device. The M3Pro is a lightweight, multi-mode esports mouse designed for precision and comfort.

2. Specifications

The SMAILWOLF M3Pro mouse offers advanced features for optimal performance. Below are the detailed specifications:

3. Package Contents

Please check the package for the following items:

• 1 x SMAILWOLF M3Pro Wireless Mouse
• 1 x USB Type-C Charging Cable
• 1 x 2.4G USB Receiver
• 1 x User Manual (this document)
• (Optional) Anti-slip stickers

4. Setup

4.1. Charging the Mouse

Connect the mouse to a USB power source (e.g., computer USB port, USB wall adapter) using the provided Type-C charging cable. The red indicator light on the mouse will be steadily lit during charging and will turn off once the battery is fully charged.

4.2. Connection Methods

The SMAILWOLF M3Pro supports three connection modes: Wired, 2.4G Wireless, and Bluetooth. You can switch between these modes using the switch on the bottom of the mouse.

4.2.1. Wired Connection

1. Connect the mouse to your computer using the provided Type-C cable.
2. Ensure the mouse is switched to wired mode (refer to the switch on the bottom).
3. The mouse is now ready for use.

4.2.2. 2.4G Wireless Connection

1. Remove the 2.4G USB receiver from its storage compartment on the bottom of the mouse.
2. Insert the 2.4G receiver into an available USB port on your computer.
3. Turn the switch on the bottom of the mouse to the 2.4G position.
4. The indicator light on the mouse will turn red. Upon successful pairing, the red light will remain on for approximately 3 seconds before turning off, indicating the mouse is ready for use.
5. If connection fails: Long press the PB key (button 7) for three seconds while the mouse is in 2.4G mode. Re-insert the receiver into the computer's USB port. The mouse will automatically connect when it is close to the receiver. After connection, the red light will stay on for 3 seconds, then turn off.

4.2.3. Bluetooth Connection

1. Switch the mouse to BT mode using the switch on the bottom.
2. Short press the PB key (button 7) to select either Bluetooth BT1 (indicated by a blue light) or BT2 (indicated by a green light).
3. For BT1: After selecting BT1, press and hold the PB key for about three seconds. The indicator light will flash blue. On your device (e.g., phone, laptop), search for Bluetooth devices and select "mouse M3-1" to pair. After successful pairing, the blue indicator light will remain on for approximately 3 seconds, indicating a successful connection.
4. For BT2: After selecting BT2, press and hold the PB key for about three seconds. The indicator light will flash green. On your device, search for Bluetooth devices and select "mouse M3-2" to pair. After successful pairing, the green indicator light will remain on for approximately 3 seconds, indicating a successful connection.

5. Operating Instructions

5.1. Key Functions

1. Left click
2. Right-click
3. Side key +
4. Side key -
5. Scroll wheel (middle click)
6. DPI button
7. PB button (Pairing/Bluetooth selection)
8. Bluetooth/Wireless switching (switch on the bottom)
9. Type-C charging port
10. 2.4G receiver storage compartment

5.2. Indicator Light Description

• 2.4G Mode: Red Light
• Bluetooth Mode 1: Blue Light
• Bluetooth Mode 2: Green Light
• Low battery: Green indicator light flashing
• Charging: Red indicator light steadily lit
• Fully charged: Red indicator light turns off

5.3. DPI Adjustment

To adjust the DPI (Dots Per Inch) sensitivity, hold down both the middle button (scroll wheel click) and the right mouse button simultaneously for 3 seconds. This will cycle through the preset DPI levels (800-1600-2400-3200-6400-12000). For more precise or customized DPI settings, please use the dedicated driver software.

5.4. Hibernate Wake-up Instructions

• Light Sleep Mode: The mouse enters a light sleep mode after being stationary for 15 seconds. It can be awakened by moving the mouse or pressing any button.
• Deep Sleep Mode: The mouse will enter deep sleep mode after remaining idle for 20 minutes. It can be awakened by pressing any button.

6. Maintenance

Proper maintenance will ensure the longevity and optimal performance of your SMAILWOLF M3Pro mouse.

• Cleaning: Use a soft, dry cloth to gently wipe the surface of the mouse. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the internal components. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the mouse in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
• Battery Care: To prolong the battery life, avoid fully discharging the mouse frequently. It is recommended to charge the mouse when the low battery indicator flashes.

7. Troubleshooting

If you encounter any issues with your SMAILWOLF M3Pro mouse, please refer to the following common solutions:

• Mouse not responding:
  • Check the battery level and charge the mouse if necessary.
  • Ensure the correct connection mode (Wired, 2.4G, or Bluetooth) is selected via the switch on the bottom of the mouse.
  • For 2.4G wireless, ensure the USB receiver is properly inserted into a working USB port. Try re-pairing the mouse as described in the 2.4G connection section.
  • For Bluetooth, ensure the mouse is correctly paired with your device. Try unpairing and re-pairing the mouse.
  • Try connecting the mouse to a different USB port or another computer to rule out port or computer-specific issues.
• Lag or erratic movement:
  • Ensure the mouse is used on a clean, non-reflective surface suitable for optical tracking.
  • Check for potential wireless interference from other devices (e.g., Wi-Fi routers, other wireless peripherals) if using 2.4G or Bluetooth.
  • Ensure the mouse is within the effective range of the 2.4G receiver or Bluetooth connection (up to 10 meters).
  • Consider adjusting the DPI settings to a lower value if movement is too sensitive.
• Buttons not working:
  • Check for any physical obstructions preventing the buttons from clicking properly.
  • Ensure the mouse is powered on and properly connected.

8. User Tips

• Many users appreciate the lightweight design (approx. 65g) for extended use without fatigue, especially for small and medium-sized hands.
• The magnetic charging base offers convenient charging and a stable dock, keeping your workspace tidy.
• Experiment with the 6 DPI settings to find the perfect sensitivity for your tasks or games. Higher DPI is often preferred for fast-paced gaming, while lower DPI suits precision work.
• The included anti-slip stickers can enhance grip and comfort, particularly during intense gaming sessions or if you experience sweaty hands.
• Take advantage of the tri-mode connection to seamlessly switch between devices like desktops, laptops, and mobile phones.

9. Warranty and Support

For detailed warranty information, technical support, and frequently asked questions, please refer to the official SMAILWOLF website or the comprehensive user manual PDF. You can access the PDF version of this manual for more in-depth information:

View User Manual (PDF)