OSSURET Car Intelligent Multimedia System User Manual

1. Introduction

Welcome to the OSSURET Car Intelligent Multimedia System. This manual provides detailed instructions for the installation, operation, and maintenance of your new car multimedia system. Please read this manual thoroughly before using the product to ensure proper functionality and to maximize your user experience.

2. Safety Information

The installation of this multimedia system requires electrical knowledge and experience. It is highly recommended that installation be performed by a qualified professional to avoid damage to the unit or your vehicle. Always disconnect the vehicle's battery before beginning any electrical work.

• Do not attempt to disassemble or modify the unit.
• Keep the unit away from water and moisture.
• Ensure all connections are secure to prevent short circuits.
• Operate the system responsibly and avoid distractions while driving.

3. Package Contents

Please check the package for the following items:

• Main Unit (Multimedia Player)
• Frame (Vehicle-specific)
• GPS Antenna
• RCA Harness (WiFi version only)
• RCA Harness with 4G SIM Card Slot (4G version only)
• 4G LTE Antenna (4G version only)
• 4 Pin USB Cable
• 6 Pin Dual USB Cables (QS Series version)
• 6 Pin USB Cable (Other series version)
• Rear Camera Input RCA Cable
• Power Cable
• Canbus Decoder
• Radio Antenna Adapter Cable

4. Specifications

Below is a detailed comparison of the specific configurations for different series of the OSSURET Car Intelligent Multimedia System:

General Specifications:

• Is touch screen: Yes
• Built-in Screen: Yes
• Din: Double Din
• RAM: 6G (up to 8G depending on series)
• Operating System: Android 13 (up to Android 14 depending on series)
• Out Power: 4*45w
• Voltage: 12 V
• Item Weight: 2kg
• Output Type: Colored
• Special Features: Built-In Speaker/Microphone, WiFi function, Support 3G Network, Support 4G Network, Support Can-Bus, Built-in GPS, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control
• Digital Media Format: Mp3, MP4, WMA, JPEG
• OSD Language: Multi-language support including English, Chinese, German, Russian, French, Italian, Spanish, etc.
• Resolution: 1280*720/1024*600
• Display Size: 9"
• Origin: Mainland China
• ROM: 128G (up to 128G depending on series)
• Certification: CE, FCC
• QS Series CPU: Octa Core 2.0GHz * 8
• QS Series System: Android 14
• QS Series USB connector: 3 USB 2.0 interfaces
• QS Series Bluetooth: Bluetooth 5.4
• QS Series WIFI: WIFI 6
• QS8PNC: with 360 camera

5. Installation

Before proceeding with installation, ensure you have all necessary tools and have disconnected the vehicle's battery. Professional installation is highly recommended.

5.1. Applicable Models & Years

This system is designed for OPEL ASTRA H 2006-2014. Note: Years are for reference only. Please confirm the center console of your vehicle before installation.

5.2. Installation Effect

The traditional car infotainment system is often outdated with average sound quality and laggy performance. The upgraded version features smart connectivity, high-definition audio, and smooth operation. Observe the visual difference before and after installation.

5.3. Connector Pin Pictures

Before purchasing, please make sure the original interface is the same as the picture. Connect the power cable and other connectors as shown.

5.4. Rear View Camera Connection

Connect the reverse camera correctly as shown in the diagram. If your car has a Canbus system and the G5 is connected to the Canbus decoder on your power cable, you do not need to connect the red wires (Rever Control) on the reverse video cable.

5.5. OBD Box Installation

The OBD interface can help you quickly locate the cause of your vehicle's malfunction. Installation is easy in three steps:

1. Find the original OBD port.
2. Interface with the product OBD.
3. Fixed mounting position.

5.6. 360-Degree Panoramic Camera Installation

Our 360 panoramic camera has an auto-calibration function, allowing you to set the parameters directly on the machine without calibration paper and other tools. The dual left and right cameras are more portable than traditional camera installations, and there is no need to drill holes or remove door panels during installation. Please note that only the QS8PNC version supports 360 panoramic cameras.

6. Basic Operation

6.1. Power On & Power Off

The radio will power on automatically when the car's ACC is powered. It will then access its main UI after displaying the start logo or Boost image. The radio will power off automatically when you remove the car key.

6.2. Reset (RST)

To reset the system, use a small, pointed object to press into the RST hole located on the radio's front panel. This will restart the system.

6.3. Touch Screen Usage

• Click/Click and Hold: Use your finger to directly touch icons or buttons to operate. A short click activates a function (e.g., radio icon on Main UI to turn on radio). A long click performs corresponding operations like removing or deleting an app icon.
• Slip: Use your finger to slide the touch screen left, right, up, or down. For example, sliding the screen up and down can check the music display list.
• Zoom: When browsing webpages, use two fingers to long-click the screen. Spread two fingers to zoom in, or merge two fingers to zoom out.

6.4. Program Switching

• Radio, music, video, and Bluetooth music cannot work simultaneously.
• Radio, music, video, and Bluetooth music can work with GPS function at the same time. The volume of radio, music, video, and Bluetooth music will automatically turn down during GPS broadcast.

7. Functional Applications

7.1. Main UI

The main user interface provides quick access to various functions:

1. Back key, home key, task key: Navigation buttons.
2. Status bar: Displays time, WLAN status, and location.
3. More Application: Tap to enter the full application screen.
4. Multimedia shortcut display window: Shows music, radio, Bluetooth music, etc.
5. Safe driving assistance controls display window.
6. Show date and week and local weather.
7. Common APP area: Press and hold an icon to replace it with another app. Click an icon to access its function. On non-main UI screens, click the home icon to return to the main UI.

7.2. Dropdown Bar

Slide your finger over the top edge of the screen to access the drop-down menu:

1. Swipe left and right to adjust screen brightness.
2. Swipe left and right to adjust volume.
3. Touch to enter Bluetooth Settings page.
4. Touch to turn on/off phone hotspot.
5. Touch to clear background apps.
6. Touch to enter Android Settings screen.
7. Touch to enter car Settings page.
8. Touch to turn off the screen and mute it, and tap again to restore it.
9. Day and night theme mode switch.

7.3. Bluetooth

The Bluetooth feature allows for hands-free calling and music streaming.

7.3.1. Bluetooth Connection

1. Turn on the Bluetooth function on the device.
2. The connected Bluetooth device list screen will be displayed.
3. Touch the 'Search' icon to begin searching for your cellphone's Bluetooth. Ensure your cellphone's Bluetooth is turned on. Your cellphone's Bluetooth will appear on the screen.
4. Touch your cellphone in the list to pair. You may need to enter the password '0000' on your phone and allow the device to access your contact list.
5. After successful pairing, the system will establish a Bluetooth connection, and the device name will be displayed in the pair list.
6. The next time you turn on the player, Bluetooth will connect automatically.

7.3.2. Bluetooth Settings

1. On the Bluetooth page, touch the settings icon to access Bluetooth settings.
2. Rename the device.
3. Reset the device PIN code.
4. Set Bluetooth to connect automatically or not.
5. Set Bluetooth to answer phone calls automatically or not.

7.3.3. Calling Records

Touch the call icon to enter the calling records page. You can switch among outgoing, incoming, and missed calls.

7.3.4. Bluetooth Contact List

Touch the search icon to update the contact list from your cellphone. You can slide the letter on the right side to quickly search the list.

7.3.5. Dialing Page

Touch the dialing icon to enter the dialing page and make a phone call directly.

7.4. Music Playback

The system supports local music playback from various sources.

1. Music album picture display: Slide left and right to switch songs.
2. Music playback control buttons: Play/pause, next/previous track, add to favorites, set loop mode.
3. Click or drag the progress bar to adjust playback position.
4. Click the search icon to update the local music list.
5. Click the settings icon for music background settings.

7.4.1. Music Playlists

Music playlists are divided into "Collection", "All", "SD card playlist" and "Udisk playlists". The system supports 3 U-disk playlists; the U-disk playlists option will be hidden if no U-disk is inserted.

7.5. Radio

The radio function allows you to listen to FM/AM bands and save your favorite stations.

7.5.1. Radio Operation

• Low-frequency step tuning: Adjust frequency downwards.
• High-frequency step tuning: Adjust frequency upwards.
• Auto search radio station: Automatically search and save stations.
• Search to Previous valid station: Go to the previous strong signal station.
• Switch bands: Toggle between FM/AM bands.
• Search to next available station: Go to the next strong signal station.
• Access into DSP apk: Open DSP settings.
• Add to favorites: Save current station to favorites.
• Favorites list: View saved stations.
• Turn off radio: Power off the radio function.

7.5.2. RDS (Radio Data System)

Supports "TA" (Traffic Announcement) and "AF" (Alternative Frequencies) functions. AF searches for other transmitting frequencies automatically on current radio stations. TA searches for the same type of radio stations automatically. Press "PTY" to search for your favorite program, such as specific types of music.

7.6. DSP (Digital Sound Processor)

The DSP provides advanced audio customization options.

7.6.1. EQ (Equalizer)

The EQ supports multimedia modes: customize, standard, rock, soft, classical, pop, hall, jazz, cinema, and balance. The DSP supports 32 segments of data that can be adjusted from 20Hz to 20kHz. You can directly slide the sound wave line with your finger to set the EQ sound effect, or select the corresponding frequency band for refined settings.

7.6.2. Sound Field Settings

The default is centered, and the sound is output in a balanced way. Selecting different speaker modes will make the sound focus on being output in a certain area. You can adjust the buttons around the seat picture or slide the small icon on the seat picture, which will also make the sound focus on being output in a certain area.

7.6.3. Channel Settings

You can set the sound gain for the speakers of each channel to make the volume of all speakers consistent. Additionally, you can set the phase inversion to ensure that your speakers work properly.

7.6.4. Sound Filtering (HPF/LPF)

You can use the functions of HPF and LPF to filter the audio signal for each channel, making the sound purer.

7.6.5. Dynamic Bass Boost

Enhance the volume and expressiveness of the bass part to improve the low-frequency effect, making the music or sound fuller and more impactful.

7.6.6. Automatic 3D Surround Sound Effect

You can turn on or off the 3D surround sound effect to create a more immersive listening experience.

7.6.7. Horn Delay Settings

Control when the car's four speakers emit sound, creating a surround sound experience that makes you feel like you're in a concert hall. This advanced audio feature provides a more immersive listening experience.

7.7. Steering Wheel Control (SW Learning)

The system supports steering wheel controls for a safer and more enjoyable journey.

1. Touch 'SW Learning' to enter the steering wheel learning page. Touch 'Start' to begin.
2. Press the car steering wheel buttons you want to set. Once the notice indicates to select learning buttons, click the button icon on the screen. If successful, the button icon will have a blue label.
3. Repeat for other steering control buttons.
4. After learning is complete, touch "End" and exit.

Note: For cars without a Canbus protocol, steering wheel learning is done via car settings. For cars with a CANBUS system, the Canbus box analyzes the original car's steering wheel buttons.

7.8. GPS Navigation

Our product supports Google Maps, Herewego, IGO, Sygic, and Yandex. For online maps, connect via WiFi or 4G LTE. You can also download maps for offline use.

A high-speed GPS antenna is included, providing stable signal and faster satellite search.

7.9. Carplay & Android Auto

Use voice control for music playback, map navigation, call messaging, and more. Carplay/Android Auto lets you sync photos and music from your phone. When driving, use Carplay or Android Auto for calls, messages, music, and more.

7.9.1. WiFi Connection

1. Turn on WiFi and Bluetooth on your phone.
2. Find Bluetooth "CarBT-G5" and click on pairing.
3. After successful Bluetooth pairing, allow connection to Carplay.

7.9.2. USB/WiFi Connection

1. Turn on WiFi and Bluetooth on your phone.
2. Find Bluetooth "CarBT-G5" and click on pairing.
3. After successful Bluetooth pairing, allow connection to Android Auto (or use USB connection).

7.10. Rear View System AHD 1080P

The reversing camera system supports up to 1920*1080 pixel display, eliminating blind spots and allowing the driver to see hazards while backing up. You can adjust the reversing track up and down.

7.11. ADAS DVR AHD 1080P

Supports video loop recording. The camera automatically overwrites the oldest videos when the card is full, except for locked emergency videos.

7.12. TPMS Function (Tire Pressure Monitoring System)

Low tire pressure can lead to flat tires, poor tire grip, and rear-end accidents. Four-wheel air pressure imbalance can cause steering wheel shaking, poor driving experience, and increased fuel consumption. The TPMS function provides tire pressure display, temperature display, real-time monitoring, and high-speed sensors.

7.13. Network Connection

• Support 2.4G & 5G WiFi: For internet access, Android car stereos offer 2.4 GHz WiFi. Our system supports 5 GHz WiFi for optimal internet connectivity.
• Bluetooth tethering for saving power: For running weather widgets or streaming music, Bluetooth tethering consumes less power than a WiFi hotspot.
• USB Network Tethering: With a USB cable, you can have almost the same bandwidth as a WiFi hotspot, and your phone battery can even charge slightly.
• 4G SIM card network: Please enter the SIM card before turning on the device. Includes 4G card slot and 4G antenna. Note: QS1 does not support 4G functionality. You can also choose our Cloud Card service, which eliminates the need to buy a separate SIM card and gives you 10GB of free traffic for the first month.

7.14. Cooling Fan

You can control the fan automatically or manually. In automatic mode, when the CPU temperature is above 50°C, the system will start the fan adjustment by itself, and when the temperature is below 50°, the system will turn off the fan automatically.

7.15. AI Voice Control Pro

Supports 9 voices, including United States English, Arabic, German, Spanish, Mexican Spanish, French, Italian, Brazilian Portuguese, and Portuguese. Note: This feature requires the purchase of an additional activation code.

7.16. Optical/Coaxial Output

Our QS6-QS8 series are equipped with fiber optic and coaxial capabilities. Refer to the configuration table for additional configurations.

7.17. Day and Night Mode UI

Our products utilize a true day/night mode that switches between all main screens and sub-screens. This keeps our screens from being blinding at night and bright enough on sunny days.

7.18. Multiple Theme UI

A variety of different styles of main interface UI to choose from.

7.19. Split Screen

You can use the split screen function according to personal preferences and practical needs. This allows for simultaneous navigation and entertainment, providing a variety of applications to choose from.

7.20. DAB+ Box

Inputting digital radio programs and touch operation are supported. You can search and change programs using the touch screen. This radio can also power a connected DAB+ BOX. After installing the DAB+ Player APK, simply connect the DAB+ Box USB port to use this feature.

7.21. Clear Imaging (Ordinary vs AHD)

Adoption of high-efficiency sensors ensures clear and transparent imaging, with details visible at a glance. AHD cameras offer superior image quality compared to ordinary cameras.

8. Settings

Access the 'Car Setting' APK to configure various system parameters.

8.1. Network Settings

• WiFi setting: Turn on/off WiFi and select a network to connect.
• Mobile network: Turn on/off the 4G-LTE network.
• Hotspot enable: Turn on/off the hotspot.
• Hotspot name: Set the hotspot name.
• Hotspot pwd: Set the hotspot password.
• AP Band: Switch the hotspot band between 2.4GHz and 5GHz.

8.2. Device Settings

• Steer Wheel Setting: Configure steering wheel key learning.
• Display: Adjust screen brightness.
• Wallpaper: Set wallpaper.
• Default Theme: Set the default boot-up theme.
• Font: Set the default text font size.
• UI Mode: Set day and dark mode of the theme.
• Tri-color lamp: Set button light color.

8.3. Sound Settings

• Default Volume: Set default volume when the player boots up.
• Navigation volume: Set the volume specifically for navigation sound.

8.4. Navi Setting

• Navi setting: Select the default map application.
• Auto run navi: Choose whether the map runs automatically on device boot-up.
• Navigation mixing: Turn on/off navigation sound mixing.
• Sound mixing: Set the mixing ratio of navigation sound.
• GNSS: Query the satellite acquisition status.

8.5. General Setting

• Hand Brake: Turn on/off handbrake detection (should be on for safety).
• Key Beep: Turn on/off touchscreen sound.
• Light Detection: Turn on/off headlight switch detection (recommended for day/night mode).
• Reverse Mirror: Turn on/off reverse camera image mirror function.
• Hand Gestures Sidebar: Turn on/off quick virtual buttons.
• Sidebar Auto Hidden: Turn on/off sidebar auto hidden function.
• Pic in Pic: Turn on/off picture-in-picture function.
• Video Out: Turn on/off video out function (requires adapter).
• Car Amplifier: Control power supply of the original amplifier.
• Network share: Use cellphone to share network via Bluetooth or USB cable.
• Source recovery mode: Select player state on boot-up.
• Link Setting: Select phone link mode.

8.6. User Settings

• Language And Input: Set the default language.
• Backup And Reset: Backup and reset data.
• Multi-touch operation: Turn on/off gesture control.
• Google settings: Access Google settings.
• Account: Manage your Google account.

8.7. System Settings

• Date And Time: Set date and time.
• Accessibility: Set display size and text, color, motion, etc.
• About: Show player parameters and detailed information.
• Factory reset: Restore to factory settings (password is 1234, proceed with caution).
• System upgrade: Upgrade player firmware.

8.8. Factory Setting

Touch 'Factory setting', input password 16176699, touch 'Confirm' to enter the Factory setting menu.

9. Troubleshooting

If you encounter any issues with your multimedia system, please refer to the following general advice. Most problems can be resolved with assistance.

• No Power: Check all power connections. Ensure the car's ACC is on.
• No Sound: Check speaker connections, volume levels, and DSP settings. Ensure no other audio source (like radio or music) is conflicting.
• Touch Screen Unresponsive: Try performing a system reset (RST button).
• GPS Not Working: Ensure the GPS antenna is properly connected and has a clear view of the sky. Check navigation settings.
• Bluetooth Connection Issues: Ensure Bluetooth is enabled on both the unit and your phone. Try re-pairing the devices.
• Camera Display Issues: Check camera connections and settings (AHD/CVBS format).

If you are unable to resolve the issue, please contact customer support for assistance.

10. Maintenance

• Cleaning: Use a soft, dry cloth to clean the screen and unit. Do not use abrasive cleaners or solvents.
• Software Updates: Regularly check for firmware and software updates from the official website (https://www.autofather.com) to ensure optimal performance and access to new features.
• Avoid Extreme Temperatures: Do not expose the unit to extreme heat or cold, as this may affect its performance and lifespan.

11. User Tips

No specific user tips from reviews or Q&A were provided in the available data. However, here are some general tips for maximizing your experience:

• Customize Your UI: Explore the multiple theme UI options and vehicle model appearance settings to personalize your system's look.
• Optimize Audio: Utilize the 32-band EQ, sound field, and dynamic bass boost features in the DSP settings to tailor the audio to your preference.
• Stay Updated: Regularly check for software updates on the official website to ensure you have the latest features and improvements.
• Voice Control: If you have the AI Voice Control Pro activated, familiarize yourself with the commands for hands-free operation.

12. Warranty & Support

If you encounter any problems with installation or operation, please contact us. 95% or more of problems can be solved with our assistance. We appreciate you contacting us FIRST if you are not satisfied. We promise to solve all your problems. If we cannot solve your problem, we can arrange for exchange or refund without delay.

Contact Us: Via the platform message system (preferred) or the direct email address provided on your warranty card.

13. PDF User Manual

For a multi-language version of the user manual, you can find it on our service website:

https://autofather.com/qs_series_manual

Other firmware & software updates can be downloaded from:

https://www.autofather.com

14. Product Video Overview

Watch this video for a quick overview of the system's features and interface: