1. Introduction
Thank you for choosing the JONSBO XA-360/120 ARGB Case Fan. This integrated structure fan is designed to provide efficient cooling for your PC case or radiator while offering stunning customizable ARGB lighting effects. Featuring dual bezel lighting, color blocking design, and compatibility with popular motherboard ARGB synchronization technologies, this fan enhances both the performance and aesthetics of your build. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your product.
2. Safety Information
Please read and follow these safety guidelines to prevent damage to the product or injury to yourself:
- Ensure your computer system is powered off and unplugged from the wall outlet before installation.
- Avoid touching the fan blades while the fan is operating.
- Do not expose the fan to water or excessive moisture.
- Keep the product away from extreme temperatures and direct sunlight.
- Handle the fan and cables with care to avoid damage.
- Only use the provided cables and connectors.
3. Package Contents
Please check the package for the following items:
- JONSBO XA-360 (3-piece integrated fan) or XA-120 (single fan) ARGB Case Fan
- Mounting Screws (4 per fan unit)
- PWM 4-pin connector cable
- ARGB 3-pin 5V connector cable (male/female for series connection)
4. Specifications
| Feature | Specification (XA-360B/BR) | Specification (XA-120B/BR) |
|---|---|---|
| Model | XA-360B/BR | XA-120B/BR |
| Fan Size | 362(L) × 123(W) × 28mm(H) | 120(L) × 120(W) × 28mm(H) (Estimated based on XA-360 dimensions) |
| Fan Speed (Forward) | 700-2400 (±10%) RPM | 700-2400 (±10%) RPM |
| Fan Speed (Reverse) | 700-1800 (±10%) RPM | 700-1800 (±10%) RPM |
| Air Volume (Forward) | 21.46-62.40 CFM | 21.46-62.40 CFM |
| Air Volume (Reverse) | 19.46-44.58 CFM | 19.46-44.58 CFM |
| Wind Pressure (Forward) | 0.49-2.46 mmH2O | 0.49-2.46 mmH2O |
| Wind Pressure (Reverse) | 0.29-1.71 mmH2O | 0.29-1.71 mmH2O |
| Noise (Forward) | 21.3-37.3 dB(A) | 21.3-37.3 dB(A) |
| Noise (Reverse) | 17.3-31.6 dB(A) | 17.3-31.6 dB(A) |
| Rated Voltage (Fan) | 12V | 12V |
| Rated Voltage (LED) | 5V | 5V |
| Rated Current (Fan, Forward) | 0.61A | 0.61A |
| Rated Current (Fan, Reverse) | 0.35A | 0.35A |
| Rated Current (LED) | 1.35A | 1.35A |
| Power Consumption (Fan, Forward) | 7.32W | 7.32W |
| Power Consumption (Fan, Reverse) | 4.20W | 4.20W |
| Power Consumption (LED) | 6.75W | 6.75W |
| MTTF | ≥20000h (Room Temp: 25°C) | ≥20000h (Room Temp: 25°C) |
| Interface | PWM 4PIN, ARGB 3PIN | PWM 4PIN, ARGB 3PIN |
| Bearing | Hydraulic Bearings | Hydraulic Bearings |
| Number of LED beads | 68 on periphery + 27 on common axis | 68 on periphery + 27 on common axis |
Note: Please select a controller that supports the corresponding quantity and specifications of light beads.
5. Installation
5.1. Fan Version and Wind Direction
The JONSBO XA-360/120 series offers both Forward (intake) and Reverse (exhaust) versions to optimize airflow within your PC case. It is crucial to select the correct fan version and orientation for your desired airflow path.
- Forward Fan (XA-120B, XA-360B): Air flows out from the side with the fan grille/label. Typically used for exhaust.
- Reverse Fan (XA-120BR, XA-360BR): Air flows in from the side with the fan grille/label. Typically used for intake.
5.2. Mounting the Fan
- Identify the desired mounting location in your PC case or on your radiator.
- Align the fan with the screw holes. The fan is fixed with 4 screws.
- Secure the fan using the provided mounting screws. Do not overtighten.
5.3. Wiring Connections
The JONSBO XA-360/120 fans feature a simplified wiring process with a Type-C hidden interface for cleaner cable management.
- Power Connection (PWM): Connect the 4-pin PWM cable from the fan to an available 4-pin fan header on your motherboard. This allows for intelligent fan speed control.
- ARGB Lighting Connection:
- Locate the 3-pin 5V ARGB connector cable.
- Connect this cable to a compatible 3-pin 5V ARGB header on your motherboard or an ARGB controller.
- The 5V ARGB plug features male and female designs, allowing multiple fans or other ARGB devices to be connected in series for synchronized lighting effects.
For detailed wiring diagrams and specific motherboard software instructions, please refer to your motherboard's user manual or the official JONSBO user manual (PDF) available at JONSBO User Manual (PDF).
6. Operation
6.1. Fan Speed Control (PWM)
The 4-pin PWM connection allows your motherboard to dynamically control the fan speed based on system temperature. This ensures optimal cooling performance while minimizing noise levels. You can typically configure fan curves through your motherboard's BIOS/UEFI settings or dedicated software utilities.
6.2. ARGB Lighting Control
The JONSBO XA-360/120 fans support Addressable RGB (ARGB) lighting, offering a wide range of customizable effects.
- Motherboard Synchronization: If connected to a compatible 3-pin 5V ARGB header, you can control the lighting effects using your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, ASRock Polychrome Sync, Gigabyte RGB Fusion). This allows for synchronized lighting across all compatible components in your system.
- Dual Light Effects: The fan features a border dual light effect rotation switch, offering a 3-sided matrix light effect and a 1-sided thousand-layer mirror light effect. These can be switched freely to suit your aesthetic preference.
7. Maintenance
Regular maintenance helps ensure optimal performance and extends the lifespan of your fan:
- Cleaning: Periodically clean the fan blades and frame to remove dust buildup. Use a soft brush or compressed air. Ensure the system is powered off and unplugged before cleaning.
- Inspection: Check cables for any signs of wear or damage. Ensure all connections are secure.
- Avoid Lubrication: The hydraulic bearings are self-lubricating and do not require additional oiling.
8. Troubleshooting
- Fan is not spinning:
- Ensure the 4-pin PWM cable is securely connected to the motherboard fan header. Check BIOS/UEFI settings to confirm the fan header is enabled and configured correctly.
- ARGB lighting is not working or not synchronizing:
- Verify the 3-pin 5V ARGB cable is correctly connected to a compatible motherboard header or controller. Ensure your motherboard's ARGB software is installed and configured to detect and control the fans. Check for any loose connections in the series chain if multiple ARGB devices are used.
- Fan is excessively noisy:
- Check for any obstructions (cables, debris) hitting the fan blades. Ensure the fan is securely mounted and not vibrating against the case. Adjust fan speed curves in BIOS/UEFI or software to reduce RPM if noise is a concern.
- Fan is not providing adequate cooling:
- Verify the fan's wind direction is appropriate for its mounting location (intake vs. exhaust). Ensure there are no obstructions blocking airflow. Consider adjusting fan speed to a higher RPM if temperatures are too high.
9. User Tips
- Excellent Finish and Easy Installation: Users have noted the high quality finish and straightforward installation process of these fans. Take your time during installation for a clean and effective setup.
- Cable Management: Utilize the Type-C hidden interface and the ability to daisy-chain ARGB connections to achieve a clean and organized build.
- Optimize Airflow: Carefully plan your fan layout, considering both Forward (intake) and Reverse (exhaust) versions, to create an efficient airflow path within your PC case for optimal cooling.
10. Warranty and Support
JONSBO products are manufactured to the highest quality standards. In the unlikely event of any issues, please refer to the warranty information provided with your purchase or contact JONSBO customer support for assistance.
For further technical details or support, you may also refer to the official JONSBO user manual (PDF) available at JONSBO User Manual (PDF).